Numerical determination of the substrate's zero-chirp geometry for the elimination of the period chirp in laser interference lithography.

The technique of deliberately bending the substrate during the exposure offers a promising solution to eliminate the period chirp in laser interference lithography. The exact geometry of the substrate to allow for this elimination is given by the solution of an ordinary differential equation (ODE) which has not been solved before. We therefore present a new contemplation of this particular ODE and its solution, the zero-chirp geometry.

Bending of Lloyd's mirror to eliminate the period chirp in the fabrication of diffraction gratings.

We present a new technique to prevent the detrimental period chirp that appears in optical gratings fabricated by laser interference lithography (LIL). The idea is to bend the Lloyd's mirror in the lithographic setup to eliminate the period chirp already at the step of the grating's exposure. A new mathematical model was developed to describe the required bending geometry of the mirror.

Compact 20-pass thin-disk multipass amplifier stable against thermal lensing effects and delivering 330 mJ pulses with M2 < 1.17.

We report on an Yb:YAG thin-disk multipass amplifier delivering 100 ns long pulses at a central wavelength of 1030 nm with an energy of 330 mJ at a repetition rate of 100 Hz. The beam quality factor at the maximum energy was measured to be M < 1.17.

Detrimental effects of period-chirped gratings in pulse compressors.

We present a comprehensive simulative and experimental investigation of how period-chirped pulse compression gratings affect the compressed pulses. A specifically developed ray-tracing tool was used for the simulative investigations. It is shown that the chirp creates a characteristic spatio-spectral error pattern, which leads to a degradation of the beam quality and an increase of the pulse duration.

Injection-seeded high-power Yb:YAG thin-disk laser stabilized by the Pound-Drever-Hall method.

We demonstrate an injection-seeded thin-disk Yb:YAG laser at 1030 nm, stabilized by the Pound-Drever-Hall (PDH) method. We modified the PDH scheme to obtain an error signal free from Trojan locking points, which allowed robust re-locking of the laser and reliable long-term operation. The single-frequency pulses have 50 mJ energy (limited to avoid laser-induced damage) with a beam quality of M < 1.

Simple spatially resolved period measurement of chirped pulse compression gratings.

We present an easy-to-implement and low-cost setup for the precise measurement of the period chirp of diffraction gratings offering a resolution of 15 pm and reasonable scan speeds of 2 seconds per measurement point. The principle of the measurement is illustrated on the example of two different pulse compression gratings, one fabricated by laser interference lithography (LIL) and the other by scanning beam interference lithography (SBIL). A period chirp of 0.

General mathematical model for the period chirp in interference lithography.

We present a general analytical model for the calculation of the spatial distribution of the grating period, enabling the unification of all configurations of classical laser interference lithography (LIL) and scanning-beam interference lithography (SBIL) into one formalism. This is possible due to the consideration of Gaussian beams instead of point sources which allow for the accurate description of not only the laser's far-field but also its near-field. The proposed model enables the calculation of the grating period, the inclination and the slant of the grating lines on arbitrarily shaped substrates, originating from the interference of arbitrarily orientated and positioned Gaussian beams.

Pound-Drever-Hall locking scheme free from Trojan operating points.

The Pound-Drever-Hall (PDH) technique is a popular method for stabilizing the frequency of a laser to a stable optical resonator or, vice versa, the length of a resonator to the frequency of a stable laser. We propose a refinement of the technique yielding an "infinite" dynamic (capture) range so that a resonator is correctly locked to the seed frequency, even after large perturbations. The stable but off-resonant lock points (also called Trojan operating points), present in conventional PDH error signals, are removed by phase modulating the seed laser at a frequency corresponding to half the free spectral range of the resonator.

Experimental analysis on CPA-free thin-disk multipass amplifiers operated in a helium-rich atmosphere.

We present an experimental investigation on the benefits of helium as an atmospheric gas in CPA-free thin-disk multipass amplifiers (TDMPAs) for the amplification to average powers exceeding 1 kW and pulse peak powers reaching 5 GW. Both the performance of the amplifier and the properties of the amplified sub-400 fs laser pulses centred at a wavelength of 1030 nm are compared for different helium concentrations in air, outlining and quantifying the benefits of a helium-rich atmosphere. The amplification of 100 µJ pulses in an atmosphere with 60% helium instead of air led to a maximum increase in efficiency from 24% to 29%.

Theoretical investigation on the elimination of the period chirp by deliberate substrate deformations.

We present a theoretical investigation on the approach of deliberately bending the substrate during the exposure within laser interference lithography to compensate for the period chirp. It is shown that the yet undiscovered function of the surface geometry, necessary to achieve the zero-chirp case (i.e.

High-power quasi-CW diode-pumped 750-nm AlGaAs VECSEL emitting a peak power of 29.6 W and an average power of 8.5 W.

A peak output power of 29.6 W and an average output power of 8.5 W at a wavelength of 750 nm were demonstrated in quasi-CW multi-mode operation using an AlGaAs-based vertical external-cavity surface-emitting laser (VECSEL) diode-pumped at a wavelength of 675 nm.

Comprehensive theoretical analysis of the period chirp in laser interference lithography.

We present a theoretical investigation on laser interference lithography used for the exposure of linear gratings. The focus is on the geometry of the arising interference lines on the substrate, in particular on their period and orientation, depending on the illumination geometry as determined by the setup. The common approach with point sources emitting spherical wavefronts is considered for the illumination.

Nonlinear absorption in lithium triborate frequency converters for high-power ultrafast lasers.

We report on an analysis of the nonlinear absorption in lithium triborate (LBO) used for second and third harmonic generation of ultrashort laser pulses at average powers in the order of kW and with sub-picosecond pulse duration. Thermographic imaging of the LBO crystals together with a simple analytical model revealed the presence of nonlinear absorption in both harmonic generation processes. Subsequent processing with a numerical model considering the nonlinear mixing, the absorption, and the heat conduction was used to estimate the absorption coefficients.

Ceramic Yb:LuO thin-disk laser oscillator delivering an average power exceeding 1 kW in continuous-wave operation.

We report on continuous-wave (cw) laser experiments with a high-quality and large-size Yb:LuO polycrystalline transparent ceramic in a thin-disk laser oscillator. An output power of up to 1190 W was achieved in multimode operation with an optical efficiency of 60.3%.

High-power thin-disk lasers emitting beams with axially-symmetric polarizations.

We present the intracavity generation of beams with radial polarization at an average output power of 750 W and an optical efficiency of 43% from a continuous wave thin-disk laser. Circular grating waveguide output couplers (GWOC) were used to select the radial polarization. The sensitivity of the polarizing function of the GWOC with regards to the fabrication tolerances is also analysed in details with a particular emphasis on the effect of the duty cycle and the geometrical profile of the gratings.

Efficient and high-throughput ablation of platinum using high-repetition rate radially and azimuthally polarized sub-picosecond laser pulses.

A highly productive ablation process of 100 nm thick platinum films with a processed area rate of up to 378 cm/min is presented using radially and azimuthally polarized laser beams. This was achieved by developing a laser amplifier generating 757 fs long laser pulses at a maximum average power of 390 W and a repetition rate of 10.6 MHz with adjustable polarization states, i.

Azimuthally polarized picosecond vector beam with 1.7 kW of average output power.

We report on a thin-disk multipass amplifier delivering azimuthally polarized, 7.8 ps short, laser pulses at an average power and with pulse energies of up to 1.7 kW and 5.

SESAM mode-locked Yb:YAB thin-disk oscillator delivering an average power of 19 W.

We report on a semiconductor saturable absorber mirror mode-locked thin-disk oscillator based on Yb:YAB delivering pulses with a duration of 462 fs at an average output power of 19.2 W and a pulse energy of 0.38 µJ.

Measuring the α-particle charge radius with muonic helium-4 ions.

The energy levels of hydrogen-like atomic systems can be calculated with great precision. Starting from their quantum mechanical solution, they have been refined over the years to include the electron spin, the relativistic and quantum field effects, and tiny energy shifts related to the complex structure of the nucleus. These energy shifts caused by the nuclear structure are vastly magnified in hydrogen-like systems formed by a negative muon and a nucleus, so spectroscopy of these muonic ions can be used to investigate the nuclear structure with high precision.

High-quality high-throughput silicon laser milling using a 1 kW sub-picosecond laser.

We report on high-quality high-throughput laser milling of silicon with a sub-ps laser delivering more than 1 kW of average laser power on the workpiece. In order to avoid heat accumulation effects, the processing strategy for high-quality laser milling was adapted to the available average power by using five-pulse bursts, a large beam diameter of 372 µm to limit the peak fluence per pulse to approximately 0.7/, and a high feed rate of 24 m/s.

Ultrafast green thin-disk laser exceeding 1.4 kW of average power.

We present an ultrafast laser with a near-diffraction-limited beam quality delivering more than 1.4 kW of average power in the visible spectral range. The laser is based on second harmonic generation in a lithium triborate crystal of a Yb:YAG thin-disk multipass amplifier emitting more than 2 kW of average power in the infrared.

Analysis of material concentration in step-index fibers with alumina cores produced by means of the powder-in-tube technique.

Step-index fibers (SIFs) with alumina cores were fabricated employing the powder-in-tube technique. The fabricated SIFs have alumina concentrations of up to 32 mol%, which is the highest value reported so far for fibers with core diameters smaller than 25 μm. The mixing mechanisms between alumina and silica during fiber drawing were revealed by energy dispersive X-ray analysis of the neck-down area of the preform.

Trimming method for a high-yield manufacturing of high-efficiency diffraction gratings.

The tolerances in manufacturing of fully dielectric diffraction gratings based on the leaky-mode resonance in the -1st diffraction order can be challenging, especially if the grating design exhibits high diffraction efficiency (DE) only within a comparatively narrow spectral bandwidth. To gain improved control on the spectral bandwidth exhibiting high DE, we implemented a two-step etching approach within the fabrication process of the grating. First, a dry and anisotropic etching step was used for pre-shaping the grating, followed by iterative isotropic wet-etching steps using an alkaline solution (KOH) at a temperature of 90°C to adjust the maximum efficiency around the desired wavelength with high precision.