Development of Thermosensitive Hydrogels with Tailor-Made Geometries to Modulate Cell Harvesting of Non-Flat Cell Cultures.

Considering the complexity in terms of design that characterizes the different tissues of the human body, it is necessary to study and develop more precise therapies. In this sense, this article presents the possibility of fabricating photocurable thermosensitive hydrogels with free geometry and based on N-Vinyl Caprolactam (VCL) with the aim of modulating the adhesion of non-planar cell cultures. The fabrication process is based on the use as a mold of two-layer thick water-soluble polyvinyl alcohol (PVA) previously printed by Extrusion Material (MatEx).

Broadly Accessible 3D Skin Model as a Comprehensive Platform for Antibacterial Therapy Screening.

Skin infections are currently a worldwide emergency as antibiotic-resistant bacteria are spreading, leading to the ineffectiveness of most antibiotics and antibacterial strategies. Consequently, there is an urgency of developing and testing innovative antibacterial therapies. As traditional 2D cell culture and planktonic bacteria culture can be obsolete due to their incapability of resembling the complex infection environment, 3D skin models can be a powerful tool to test and validate therapies.

Hydrogels with dual sensitivity to temperature and pH in physiologically relevant ranges as supports for versatile controlled cell detachment.

Thermosensitive hydrogels based on the N-vinyl caprolactam (VCL), capable of allowing for cell adhesion and proliferation, as well as non-aggressive detachment by controlled temperature drop, were functionalized with 23 % or lower molar percentages of the cationizable hydrophobic unit 2-(diisopropylamino) ethyl methacrylate (DPAEMA), to obtain networks with dual sensitivity to temperature and pH. The swelling analysis of the systems has shown a transition pK (pK) close to physiological values, dependent on the temperature of the medium (pK of 6.6 and 6.

Hierarchical Hybrid Coatings with Drug-Eluting Capacity for Mg Alloy Biomaterials.

A hierarchical hybrid coating (HHC) comprising a ceramic oxide layer and two biodegradable polymeric (polycaprolactone, PCL) layers has been developed on Mg3Zn0.4Ca cast alloy in order to provide a controlled degradation rate and functionality by creating a favorable porous surface topography for cell adhesion. The inner, ceramic layer formed by plasma electrolytic oxidation (PEO) has been enriched in bioactive elements (Ca, P, Si).

Vat Photopolymerization 3D Printing of Hydrogels with Re-Adjustable Swelling.

Vat photopolymerization typically prints highly crosslinked networks. Printing hydrogels, which are also networks but with a high swelling capacity in water and therefore with low crosslinking density, is a challenge for this technique. However, it may be of interest in medicine and in other areas, since it would allow for the preparation of this type of 3D-shaped material.

Clear polyurethane coatings with excellent virucidal properties: Preparation, characterization and rapid inactivation of human coronaviruses 229E and SARS-CoV-2.

Commercial polyurethane (PU) coating formulations have been modified with 1-(hydroxymethyl)-5,5-dimethylhydantoin (HMD) both in bulk (0.5 and 1% w/w) and onto the coatings surface as an N-halamine precursor, to obtain clear coatings with high virucidal activity. Upon immersion in diluted chlorine bleaching, the hydantoin structure on the grafted PU membranes was transformed into N-halamine groups, with a high surface chlorine concentration (40-43μg/cm).

Evaluation of Poly(-Ethyl Pyrrolidine Methacrylamide) (EPA) and Derivatives as Polymeric Vehicles for miRNA Delivery to Neural Cells.

MicroRNAs (miRNAs) are endogenous, short RNA oligonucleotides that regulate the expression of hundreds of proteins to control cells' function in physiological and pathological conditions. miRNA therapeutics are highly specific, reducing the toxicity associated with off-target effects, and require low doses to achieve therapeutic effects. Despite their potential, applying miRNA-based therapies is limited by difficulties in delivery due to their poor stability, fast clearance, poor efficiency, and off-target effects.

Polycaprolactone with multiscale porosity and patterned surface topography prepared using sacrificial 3D printed moulds: Towards tailor-made scaffolds.

Biocompatible three-dimensional porous scaffolds are widely used in multiple biomedical applications. However, the fabrication of tailor-made 3D structures with controlled and combined multiscale macroscopic-microscopic, surface and inner porosities in a straightforward manner is still a current challenge. Herein, we use multimaterial fused deposition modeling (FDM) to generate poly (vinyl alcohol) (PVA) sacrificial moulds filled with poly (Ɛ-caprolactone) (PCL) to generate well defined PCL 3D objects.

Fabrication of 3D cylindrical thermosensitive hydrogels as supports for cell culture and detachment of tubular cell sheets.

Pseudo interpenetrating vinyl-caprolactam (VCL) based thermosensitive tubular hydrogels with a volume phase transition temperature, VPTT, around 35 °C, have been prepared by combining two different crosslinkers, a di-methacrylate (C1) and a di-vinyl urea (C2). The molar ratio between the two crosslinkers (for a global crosslinker molar percentage of 1.9) has shown to play a key role on the properties of the hydrogel.

Photocurable Thiol-yne Alginate Hydrogels for Regenerative Medicine Purposes.

Every year millions of people worldwide undergo surgical interventions, with the occurrence of mild or severe post-treatment consequences meaning that rehabilitation plays a key role in modern medicine. Considering the cases of burns and plastic surgery, the pressing need for new materials that can be used for wound patches or body fillers and are able to sustain tissue regeneration and promote cell adhesion and proliferation is clear. The challenges facing next-generation implant materials also include the need for improved structural properties for cellular organization and morphogenic guidance together with optimal mechanical, rheological, and topographical behavior.

Wrinkling on Stimuli-Responsive Functional Polymer Surfaces as a Promising Strategy for the Preparation of Effective Antibacterial/Antibiofouling Surfaces.

Biocompatible smart interfaces play a crucial role in biomedical or tissue engineering applications, where their ability to actively change their conformation or physico-chemical properties permits finely tuning their surface attributes. Polyelectrolytes, such as acrylic acid, are a particular type of smart polymers that present pH responsiveness. This work aims to fabricate stable hydrogel films with reversible pH responsiveness that could spontaneously form wrinkled surface patterns.

Anticorrosion and Cytocompatibility Assessment of Graphene-Doped Hybrid Silica and Plasma Electrolytic Oxidation Coatings for Biomedical Applications.

Magnesium AZ31 alloy substrates were coated with different coatings, including sol-gel silica-reinforced with graphene nanoplatelets, sol-gel silica, plasma electrolytic oxidation (PEO), and combinations of them, to improve cytocompatibility and control the corrosion rate. Electrochemical corrosion tests, as well as hydrogen evolution tests, were carried out using Hanks' solution as the electrolyte to assess the anticorrosion behavior of the different coating systems in a simulated body fluid. Preliminary cytocompatibility assessment of the different coating systems was carried out by measuring the metabolic activity, deoxyribonucleic acid quantification, and the cell growth of premyoblastic C2C12-GFP cell cultures on the surface of the different coating systems.

Wheat germin-like protein: Studies on chitin/chitosan matrix for tissue engineering applications.

Advances in tissue engineering require the development of new biomaterials with adequate properties of cell attachment and growth. The properties of biomaterials can be improved by incorporation of bioactive molecules to enhance in vitro and/or in vivo functions. In this work, we study the role of a wheat germin-like protease inhibitor (GLPI), free or immobilized in biocompatible matrices to improve cell-attachment ability on different mammalian cell lines.

Efficient and Low Cytotoxicity Gene Carriers Based on Amine-Functionalized Polyvinylpyrrolidone.

Non-viral vectors are a safety tool for gene therapy to deliver therapeutic genes. Among the different non-viral vectors, polyvinylpyrrolidone (PVP), a well-known hydrosoluble, neutral, and non-toxic polymer, satisfies the requirements and becomes a suitable candidate for gene delivery. In this study, we describe the preparation of polyvinylpyrrolidones decorated with pyrrolidine, piperidine, and piperazine groups, and evaluate them in vitro as non-viral gene carriers.

Biocompatible fluorinated wrinkled hydrogel films with antimicrobial activity.

Surface-modified hydrogel films were designed to control the bacterial colonization on their surface and to promote cell proliferation through the gradual insertion of highly hydrophobic functional monomers. These hydrogel films were deposited via spin-coating technique, using muscovite mica as a substrate. These samples were then exposed to different external stimuli to produce wrinkled patterns.

PEO coatings design for Mg-Ca alloy for cardiovascular stent and bone regeneration applications.

Four bioactive PEO (plasma electrolytic oxidation) coatings were generated on Mg0.8Ca alloy using a Ca/P-based electrolyte and adding Si or Fas necessary. Surface characteristics, chemical composition and ion liberation of the coatings were characterized using SEM/EDS (Scanning Electron Microscopy/Energy Dispersive X-ray spectroscopy), X-ray diffraction, optical profilometry and ICP-OES (inductively coupled plasma optical emission spectrometry).

Microwrinkled pH-sensitive hydrogel films and their role on the cell adhesion/proliferation.

In this work, hydrogels based on HEMA and DMAEMA (pH-sensitive monomer) were used to form biocompatible films which present microwrinkled patterns in their surface, with the focus of exploring the role of chemical composition on cell adhesion and proliferation. Three different pH (5.4, 7.

Wrinkled Hydrogel Surfaces with Modulated Surface Chemistry and Topography: Evaluation As Supports for Cell Growth and Transplant.

We report a straightforward procedure to simultaneously functionalize hydrophobic PC supports with vinylpyrrolidone (VP)-based hydrogels with both variable ionic load as well as surface topography, forming wrinkles. The strategy involves three consecutive steps: first, a contact of the polymeric support (PC) with a photopolymerizable solution comprising vinylic monomers is established. Second, UV-light exposure curing of the solution and finally, the third step involes the swelling of the hydrogel network that finally provokes its surface detachment.

Design and fabrication of biocompatible wrinkled hydrogel films with selective antibiofouling properties.

In this article, we explored the selective antibiofouling capacity acquired by functional wrinkled hydrogel films via a fine tuning of their chemical structure through the gradual insertion of hydrophobic radical groups in their network. The hydrogel consists of three main components: hydroxyethyl methacrylate (HEMA, amphiphilic monomer), trifluoroethyl methacrylate (TFMA, hydrophobic monomer), and poly(ethylene glycol) diacrylate (PEGDA, hydrophilic crosslinking agent). Interestingly, the manipulation of the chemical composition affects both, surface morphology and physicochemical characteristics of the patterns, inducing transitions between different surface microstructures, i.

Bioactive multi-elemental PEO-coatings on titanium for dental implant applications.

Bioactive PEO (Plasma Electrolytic Oxidation) coatings were generated on Grade I commercially pure titanium for dentistry applications using a Ca/P-based electrolyte with added Si, Mg, Zn or F species. Surface characteristics, chemical composition and ion liberation of the coatings were characterized using SEM/EDS, X-ray diffraction, optical profilometry, contact angle and ICP-OES. Corrosion resistance (OCP and DC polarization) was evaluated in SBF.

Combining Breath Figures and Supercritical Fluids To Obtain Porous Polymer Scaffolds.

Supercritical fluids technology is a clean methodology to foam polymeric materials. However, this technique provides only the formation of inner porosity, whereas the so-called skin layer is commonly observed at the polymer surface. This article describes a new method for the preparation of outer and inner porous poly(ε-caprolactone) (PCL) scaffolds by combination of supercritical CO (SCCO) foaming and the breath figures technique.

Fabrication of biocompatible and efficient antimicrobial porous polymer surfaces by the Breath Figures approach.

We designed and fabricated highly efficient and selective antibacterial substrates, i.e. surface non-cytotoxic against mammalian cells but exhibiting strong antibacterial activity.

Highly Efficient Antibacterial Surfaces Based on Bacterial/Cell Size Selective Microporous Supports.

We report on the fabrication of efficient antibacterial substrates selective for bacteria, i.e., noncytotoxic against mammalian cells.