Manufacture of Mesoporous Silicon Microparticles (MSMPs) as Adjuvants for Vaccine Delivery.

The advent of computational approaches has accelerated the identification of vaccine candidates like epitope peptides. However, epitope peptides are usually very poorly immunogenic and adequate platforms are required with adjuvant capacity to verity immunogenicity and antigenicity of vaccine subunits in vivo. Silicon microparticles are being developed as potential new adjuvants for vaccine delivery due to their physicochemical properties.

Phonon Structure, Infra-Red and Raman Spectra of LiMnO by First-Principles Calculations.

The layer-structured monoclinic LiMnO is a key material, mainly due to its role in Li-ion batteries and as a precursor for adsorbent used in lithium recovery from aqueous solutions. In the present work, we used first-principles calculations based on density functional theory (DFT) to study the crystal structure, optical phonon frequencies, infra-red (IR), and Raman active modes and compared the results with experimental data. First, LiMnO powder was synthesized by the hydrothermal method and successively characterized by XRD, TEM, FTIR, and Raman spectroscopy.

Simulated Acute Hypobaric Hypoxia Effects on Cognition in Helicopter Emergency Medical Service Personnel - A Randomized, Controlled, Single-Blind, Crossover Trial.

Objective: To evaluate, under replicable, blinded and standardised conditions, the effect of acute exposure to hypobaric hypoxia (HH) (equivalent to 200 or 3000 or 5000 m above sea level (asl)) on selected cognitive domains and physiological parameters in personnel of helicopter emergency medical service (HEMS).

Methods: We conducted a randomized clinical trial using a single-blind crossover design in an environmental chamber () to induce HH in 48 HEMS personnel. Participants performed cognitive tests (CT) before the ascent, after 5 min at altitude, and after simulated cardiopulmonary resuscitation (SCR).

The Infiltration of Silver Nanoparticles into Porous Silicon for Improving the Performance of Photonic Devices.

Hybrid nanostructures have a great potential to improve the overall properties of photonic devices. In the present study, silver nanoparticles (AgNPs) were infiltrated into nanostructured porous silicon (PSi) layers, aiming at enhancing the optoelectronic performance of Si-based devices. More specifically, Schottky diodes with three different configurations were fabricated, using Al/Si/Au as the basic structure.

Mechanical cardiopulmonary resuscitation in microgravity and hypergravity conditions: A manikin study during parabolic flight.

Introduction: Space travel is expected to grow in the near future, which could lead to a higher burden of sudden cardiac arrest (SCA) in astronauts. Current methods to perform cardiopulmonary resuscitation in microgravity perform below earth-based standards in terms of depth achieved and the ability to sustain chest compressions (CC). We hypothesised that an automated chest compression device (ACCD) delivers high-quality CC during simulated micro- and hypergravity conditions.

Effect of Acute Exposure to Altitude on the Quality of Chest Compression-Only Cardiopulmonary Resuscitation in Helicopter Emergency Medical Services Personnel: A Randomized, Controlled, Single-Blind Crossover Trial.

Background Helicopter emergency medical services personnel operating in mountainous terrain are frequently exposed to rapid ascents and provide cardiopulmonary resuscitation (CPR) in the field. The aim of the present trial was to investigate the quality of chest compression only (CCO)-CPR after acute exposure to altitude under repeatable and standardized conditions. Methods and Results Forty-eight helicopter emergency medical services personnel were divided into 12 groups of 4 participants; each group was assigned to perform 5 minutes of CCO-CPR on manikins at 2 of 3 altitudes in a randomized controlled single-blind crossover design (200, 3000, and 5000 m) in a hypobaric chamber.

Hydrothermal control of the lithium-rich LiMnO phase in lithium manganese oxide nanocomposites and their application as precursors for lithium adsorbents.

Lithium manganese oxides (LMOs) are key materials due to their role in Li-ion batteries and lithium recovery from aqueous lithium resources. In the present work, we investigated the effect of the crystallization temperature on the formation by hydrothermal synthesis of LMO nanocomposites with high Li/Mn ratios. It is demonstrated that LMOs with a high Li/Mn ratio can be formed by systematically favoring the lithium-rich layered monoclinic phase (LiMnO) in a mixture of monoclinic and spinel crystalline phases.

A Prospective Evaluation of the Acute Effects of High Altitude on Cognitive and Physiological Functions in Lowlanders.

Cognitive function impairment due to high altitude exposure has been reported with some contradictory results regarding the possible selective cognitive domain involvement. We prospectively evaluated in 36 lowlanders, exposed for 3 consecutive days to an altitude of 3,269 m, specific cognitive abilities (attention, processing speed, and decision-making) required to safely explore the mountains, as well as to work at altitude. We simultaneously monitored the physiological parameters.

Hybrid Nanostructured Porous Silicon-Silver Layers for Wideband Optical Absorption.

As subwavelength nanostructures are receiving increasing attention for photonic and plasmonic applications, we grew nanostructured porous silicon (n-PS) and hybrid n-PS/Ag layers onto silicon substrates and measured their reflection and absorption characteristics as functions of the wavelength, angle of incidence, and polarization state of incident light. The experimental results show that the absorption characteristics of the hybrid n-PS/Ag layer can be controlled by selecting the appropriate combination of its thickness and porosity, together with the density of infiltrant silver nanoparticles. The observed wideband optical absorption characteristics of the hybrid n-PS/Ag layers might be useful in light-harvesting devices and photodetectors, since the overall efficiency will be increased as a result of increased field-of-view for both s- and p-polarization states of incident light.

Surface micro- and nano-texturing of stainless steel by femtosecond laser for the control of cell migration.

The precise control over the interaction between cells and the surface of materials plays a crucial role in optimizing the integration of implanted biomaterials. In this regard, material surface with controlled topographic features at the micro- and nano-scales has been proved to affect the overall cell behavior and therefore the final osseointegration of implants. Within this context, femtosecond (fs) laser micro/nano machining technology was used in this work to modify the surface structure of stainless steel aiming at controlling cell adhesion and migration.

Nanostructured porous silicon: the winding road from photonics to cell scaffolds - a review.

For over 20 years, nanostructured porous silicon (nanoPS) has found a vast number of applications in the broad fields of photonics and optoelectronics, triggered by the discovery of its photoluminescent behavior in 1990. Besides, its biocompatibility, biodegradability, and bioresorbability make porous silicon (PSi) an appealing biomaterial. These properties are largely a consequence of its particular susceptibility to oxidation, leading to the formation of silicon oxide, which is readily dissolved by body fluids.

Nanostructured copper/porous silicon hybrid systems as efficient sound-emitting devices.

In the present work, the photo-acoustic emission from nanostructured copper/porous silicon hybrid systems was studied. Copper nanoparticles were grown by photo-assisted electroless deposition on crystalline silicon and nanostructured porous silicon (nanoPS). Both the optical and photo-acoustic responses from these systems were determined.

Bioreplicated visual features of nanofabricated buprestid beetle decoys evoke stereotypical male mating flights.

Recent advances in nanoscale bioreplication processes present the potential for novel basic and applied research into organismal behavioral processes. Insect behavior potentially could be affected by physical features existing at the nanoscale level. We used nano-bioreplicated visual decoys of female emerald ash borer beetles (Agrilus planipennis) to evoke stereotypical mate-finding behavior, whereby males fly to and alight on the decoys as they would on real females.

Nanostructured porous silicon-mediated drug delivery.

Introduction: The particular properties of nanostructured porous silicon (nanoPS) make it an attractive material for controlled and localized release of therapeutics within the body, aiming at increased efficacy and reduced risks of potential side effects. Since this is a rapidly evolving field as a consequence of the number of research groups involved, a critical review of the state of the art is necessary.

Areas Covered: In this work, the most promising and successful applications of nanoPS in the field of drug delivery are reviewed and discussed.

Laser fabrication of porous silicon-based platforms for cell culturing.

In this study, we explore the selective culturing of human mesenchymal stem cells (hMSCs) on Si-based diffractive platforms. We demonstrate a single-step and flexible method for producing platforms on nanostructured porous silicon (nanoPS) based on the use of single pulses of an excimer laser to expose phase masks. The resulting patterns are typically 1D patterns formed by fringes or 2D patterns formed by circles.

Adhesion and proliferation of human mesenchymal stem cells from dental pulp on porous silicon scaffolds.

In regenerative medicine, stem-cell-based therapy often requires a scaffold to deliver cells and/or growth factors to the injured site. Porous silicon (pSi) is a promising biomaterial for tissue engineering as it is both nontoxic and bioresorbable. Moreover, surface modification can offer control over the degradation rate of pSi and can also promote cell adhesion.

Optimized development of sebaceous fingermarks on nonporous substrates with conformal columnar thin films.

A form of physical vapor deposition, called the conformal-evaporated-film-by-rotation (CEFR) method, was optimized for the conformal deposition of columnar thin films (CTFs) on sebaceous fingermarks. Relying on the surface topology of the fingermark, the CTF development technique is different from traditional development techniques. After the optimization of the development conditions, the CTF development technique was found to be superior to traditional development methods on several nonporous substrates: the smooth side of Scotch(®) Multitask, Gorilla(®) , and Scotch(®) Duct tapes; clear and black soft plastics; stained and sealed walnut and cherry woods; partial bloody fingermarks on stainless steel; and discharged cartridge casings.

Laser fabrication of porous silicon-based platforms for cell culturing.

In this study, we explore the selective culturing of human mesenchymal stem cells (hMSCs) on Si-based diffractive platforms. We demonstrate a single-step and flexible method for producing platforms on nanostructured porous silicon (nanoPS) based on the use of single pulses of an excimer laser to expose phase masks. The resulting patterns are typically 1D patterns formed by fringes or 2D patterns formed by circles.

Design and characterization of biofunctional magnetic porous silicon flakes.

Magnetic porous silicon flakes (MPSF) were obtained from mesoporous silicon layers formed by multi-step anodization and subsequent composite formation with Fe oxide nanoparticles by thermal annealing. The magnetic nanoparticles adhered to the surface and penetrated inside the pores. Their structure evolved as a result of the annealing treatments derived from X-ray diffraction and X-ray absorption analyses.

Characterization of hybrid cobalt-porous silicon systems: protective effect of the Matrix in the metal oxidation.

In the present work, the characterization of cobalt-porous silicon (Co-PSi) hybrid systems is performed by a combination of magnetic, spectroscopic, and structural techniques. The Co-PSi structures are composed by a columnar matrix of PSi with Co nanoparticles embedded inside, as determined by Transmission Electron Microscopy (TEM). The oxidation state, crystalline structure, and magnetic behavior are determined by X-Ray Absorption Spectroscopy (XAS) and Alternating Gradient Field Magnetometry (AGFM).

Highly flexible method for the fabrication of photonic crystal slabs based on the selective formation of porous silicon.

A novel fabrication method of Si photonic slabs based on the selective formation of porous silicon is reported. Free-standing square lattices of cylindrical air holes embedded in a Si matrix can be achieved by proton beam irradiation followed by electrochemical etching of Si wafers. The photonic band structures of these slabs show several gaps for the two symmetry directions for reflection through the z-plane.

Silicon-based photonic crystals fabricated using proton beam writing combined with electrochemical etching method.

A method for fabrication of three-dimensional (3D) silicon nanostructures based on selective formation of porous silicon using ion beam irradiation of bulk p-type silicon followed by electrochemical etching is shown. It opens a route towards the fabrication of two-dimensional (2D) and 3D silicon-based photonic crystals with high flexibility and industrial compatibility. In this work, we present the fabrication of 2D photonic lattice and photonic slab structures and propose a process for the fabrication of 3D woodpile photonic crystals based on this approach.

Nanostructured porous silicon micropatterns as a tool for substrate-conditioned cell research.

The localized irradiation of Si allows a precise patterning at the microscale of nanostructured materials such as porous silicon (PS). PS patterns with precisely defined geometries can be fabricated using ion stopping masks. The nanoscale textured micropatterns were used to explore their influence as microenvironments for human mesenchymal stem cells (hMSCs).