Frequency drift characterization of a laser stabilized to an optical fiber delay line.

Lasers stabilized to optical fiber delay lines have been shown to deliver a comparable short-term (<1 s) frequency noise performance to that achieved by lasers stabilized to ultra-low expansion (ULE) cavities, once the linear frequency drift has been removed. However, for continuous stable laser operations, the drift can be removed only when it can be predicted, e.g.

Enhancement of nonlinear functionality of step-index silica fibers combining thermal poling and 2D materials deposition.

This work proposes a new route to overcome the limits of the thermal poling technique for the creation of second order nonlinearity in conventional silica optical fibers. We prove that it is possible to enhance the nonlinear behavior of periodically poled fibers merging the effects of poling with the nonlinear intrinsic properties of some materials, such as MoS, which are deposited inside the cladding holes of a twin-hole silica fiber. The optical waves involved in a second harmonic generation process partially overlap inside the thin film of the nonlinear material and exploit its higher third order susceptibility to produce an enhanced SHG.

Single is better than double: theoretical and experimental comparison between two thermal poling configurations of optical fibers.

Thermal poling, a technique to create permanently effective second-order susceptibility in silica optical fibers, has a suite of applications including frequency conversion and mixing for high harmonic generation and phase sensitive amplification, optical switching and modulation, and polarization-entangled photon pair generation. In this work, we compare both theoretically and experimentally two different electrode configurations for poling optical fibers, namely double-anode and single-anode, for two different geometries of the cladding holes. This analysis reveals that the single-anode configuration is optimal, both for the absolute value of effective created in the fiber core, and for the simplification of the fiber fabrication process.