Allomelanin: A Biopolymer of Intrinsic Microporosity.

Melanin is a ubiquitous natural pigment found in a diverse array of organisms. Allomelanin is a class of nitrogen-free melanin often found in fungi. Herein, we find artificial allomelanin analogues exhibit high intrinsic microporosity and describe an approach for further increasing and tuning that porosity.

Synthetic Porous Melanin.

Commonly known as a skin pigment, melanin has a vital role in UV radiation protection, primarily acting as a radical scavenger. However, a lesser known natural property of melanin, observed in some melanized organisms, is its capacity to adsorb toxins, including metals and organic molecules. Inspired by this, we set out to generate a synthetic porous melanin that would pave the way to enhancing the natural adsorbent properties of melanin and melanin-like materials.

Development of a Genetic System for CP1 (), a Wax Ester Producing Strain Isolated From an Autotrophic Biocathode.

Here, we report on the development of a genetic system for sp. strain CP1, previously isolated from the Biocathode MCL community and shown to oxidize iron and grow as a cathodic biofilm. Sequence analysis of the small and large subunits of the 16S rRNA gene of CP1, as well as comparison of select conserved proteins, indicate that it is most closely related to HP15 and sp.

Deposition of Porous Sorbents on Fabric Supports.

A microwave deposition technique for silanes, previously described for production of oleophobic fabrics, is adapted to provide a fabric support material that can be subsequently treated by dip coating. Dip coating with a sol preparation provides a supported porous layer on the fabric. In this case, the porous layer is a porphyrin functionalized sorbent system based on a powdered material that has been demonstrated previously for the capture and conversion of phosgene.

Improving Sorbents for Glycerol Capture in Biodiesel Refinement.

Biodiesel is produced by transesterification of animal fat, vegetable oil, or waste cooking oil with alcohol. After production costs, the economic viability of biodiesel is dependent on what steps are necessary to remove impurities following synthesis and the effectiveness of quality control analysis. Solid-phase extraction offers a potentially advantageous approach in biodiesel processing applications.

Reflectance-based detection for long term environmental monitoring.

Here, the potential of colorimetric sensors utilizing porphyrin indicators for long term environmental monitoring is demonstrated. Prototype devices based on commercial color sensing chips (six per device) were combined with in-house developed algorithms for data analysis. The devices are intended to provide real-time sensing of threats.

Kinetic analysis of the hydrolysis of methyl parathion using citrate-stabilized 10 nm gold nanoparticles.

"Ligand-free" citrate-stabilized 10 nm gold nanoparticles (AuNPs) promote the hydrolysis of the thiophosphate ester methyl parathion (MeP) on the surface of gold as a function of pH and two temperature values. At 50 °C, the active surface gold atoms show catalytic turnover ∼4 times after 8 h and little turnover of gold surface atoms at 25 °C with only 40% of the total atoms being active. From Michaelis-Menten analysis, k(cat) increases between pH 8 and 9 and decreases above pH 9.

Molecular sensing: modulating molecular conduction through intermolecular interactions.

We observe changes in the molecular conductivity of individual oligophenylene-vinylene (OPV) molecules due to interactions with small aromatic molecules. Fluorescence experiments were correlated with scanning tunneling microscopy measurements in order to determine the origin of the observed effect. Both nitrobenzene and 1,4-dinitrobenzene decreased fluorescence intensity and molecular conductivity, while toluene had no effect.

Extraction of Perchlorate Using Porous Organosilicate Materials.

Sorbent materials were developed utilizing two morphological structures, comprising either hexagonally packed pores (HX) or a disordered pore arrangement (CF). The sorbents were functionalized with combinations of two types of alkylammonium groups. When capture of perchlorate by the sorbents was compared, widely varying performance was noted as a result of differing morphology and/or functional group loading.

Biotemplating rod-like viruses for the synthesis of copper nanorods and nanowires.

Background: In the past decade spherical and rod-like viruses have been used for the design and synthesis of new kind of nanomaterials with unique chemical positioning, shape, and dimensions in the nanosize regime. Wild type and genetic engineered viruses have served as excellent templates and scaffolds for the synthesis of hybrid materials with unique properties imparted by the incorporation of biological and organic moieties and inorganic nanoparticles. Although great advances have been accomplished, still there is a broad interest in developing reaction conditions suitable for biological templates while not limiting the material property of the product.

Molecular electronics based nanosensors on a viral scaffold.

Assembling and interconnecting the building blocks of nanoscale devices and being able to electronically address or measure responses at the molecular level remains an important challenge for nanotechnology. Here we show the usefulness of bottom-up self-assembly for building electronic nanosensors from multiple components that have been designed to interact in a controlled manner. Cowpea mosaic virus was used as a scaffold to control the positions of gold nanoparticles.

Quantum dot fluorescence as a function of alkyl chain length in aqueous environments.

In this work, we examine the dependence of the fluorescence quantum yield of water-soluble CdSe/ZnS quantum dots on the local environment. The hydrophobicity of the local environment was modified by using different alkyl chain lengths in a set of oligo-ethylene glycols. Our results show that the quantum yield of CdSe/ZnS quantum dots is highest for the longest alkyl chain length, suggesting that a more hydrophobic environment is beneficial for generating bright, water-soluble quantum dots.

Multiplexed detection of mycotoxins in foods with a regenerable array.

The occurrence of different mycotoxins in cereal products calls for the development of a rapid, sensitive, and reliable detection method that is capable of analyzing samples for multiple toxins simultaneously. In this study, we report the development and application of a multiplexed competitive assay for the simultaneous detection of ochratoxin A (OTA) and deoxynivalenol (DON) in spiked barley, cornmeal, and wheat, as well as in naturally contaminated maize samples. Fluoroimmunoassays were performed with the Naval Research Laboratory array biosensor, by both a manual and an automated version of the system.

Detection of deoxynivalenol in foods and indoor air using an array biosensor.

Deoxynivalenol (DON), a mycotoxin produced by several Fusaruim species, is a worldwide contaminant of foods and feeds. Because of the potential dangers due to accidental or intentional contamination of foods with DON, there is a need to develop a rapid and highly sensitive method for easy identification and quantification of DON. In this study, we have developed and utilized a competitive immunoassay technique to detect DON in various food matrixes and indoor air samples using an array biosensor.

Indirect competitive immunoassay for detection of aflatoxin B1 in corn and nut products using the array biosensor.

Because of the potential health risks of aflatoxin B1 (AFB1), it is essential to monitor the level of this mycotoxin in a variety of foods. An indirect competitive immunoassay has been developed using the NRL array biosensor, offering rapid, sensitive detection and quantification of AFB1 in buffer, corn and nut products. AFB1-spiked foods were extracted with methanol and Cy5-anti-AFB1 added to the resulting sample.

Array biosensor for detection of ochratoxin A in cereals and beverages.

Contamination of food by mycotoxins occurs in minute quantities, and therefore, there is a need for a highly sensitive and selective device that can detect and quantify these organic toxins. We report the development of a rapid and highly sensitive array biosensor for the detection and quantitation of ochratoxin A (OTA). The array biosensor utilizes a competitive immunoassay format.

Ligand effects on charge transport in platinum(II) acetylides.

To investigate the electrical characteristics of organometallic complexes as molecular conductors, organometallic pi-conjugated molecules of the type trans-[PtL2(CCC6H4SAc-4)2], where L = PCy3, PBu3, PPh3, P(OEt)3, P(OPh)3, were synthesized and characterized by NMR, IR, UV, and X-ray spectroscopies. For the three complexes (L = PCy3, PPh3, and P(OEt)3) that could be measured using a cross-wire junction technique, the current-voltage (I-V) characteristics of a molecular monolayer of these complexes showed no ligand effect, despite spectroscopic evidence that electronic interaction between the phosphine ligands and the pi-system does occur. It was concluded that the tunneling efficiency across the molecule is the determining factor for conduction in this metal-molecule-metal system.

Effect of bond-length alternation in molecular wires.

Current-voltage (I-V) characteristics for metal-molecule-metal junctions formed from three classes of molecules measured with a simple crossed-wire molecular electronics test-bed are reported. Junction conductance as a function of molecular structure is consistent with I-V characteristics calculated from extended Hückel theory coupled with a Green's function approach, and can be understood on the basis of bond-length alternation.