Modeling full PCSELs and VCSELs using modified rigorous coupled-wave analysis.

An integrated rigorous coupled-wave analysis (RCWA) algorithm is presented in this paper, which can simulate full vertical-cavity surface-emitting laser (VCSEL) and photonic crystal surface-emitting laser (PCSEL) structures. A classic RCWA can only analyze a structure when the light source is incident from the top, bottom, or both sides of the device. However, for VCSEL applications, the light source is generated in the middle and propagates in both directions.

Quasiperiodic light.

Quasiperiodicity is a form of spatial order that has been observed in quasicrystalline matter but not light. We construct a quasicrystalline surface out of a light emitting diode. Using a nanoscale waveguide as a microscope (NSOM), we directly image the light field at the surface of the diode.

Efficient light harvesting in hybrid quantum dot-interdigitated back contact solar cells via resonant energy transfer and luminescent downshifting.

In this paper, we propose a hybrid quantum dot (QD)/solar cell configuration to improve performance of interdigitated back contact (IBC) silicon solar cells, resulting in 39.5% relative boost in the short-circuit current (J) through efficient utilisation of resonant energy transfer (RET) and luminescent downshifting (LDS). A uniform layer of CdSeS/ZnS quantum dots is deposited onto the AlO surface passivation layer of the IBC solar cell.

Colloidal Synthesis of CsX Nanocrystals (X = Cl, Br, I).

A facile colloidal synthesis of highly ionic cesium halide nanocrystals is reported. Colloidal nanocrystals of CsI, CsCl and CsBr with unprecedentedly small dimensions are obtained using oleylammonium halides and cesium oleate as precursors. The ease and adaptability of our method enables its universalization for the formation of other highly ionic nanocrystals.

Optimization of nano-honeycomb structures for flexible w-LEDs.

This study presents the low cost fabrication of flexible white-light-emitting diodes (w-LEDs) with nano-honeycomb-structured phosphor films. Extending the dimensions of the nano-honeycomb structures improved the color uniformity of the flexible samples, and the 950-nm pattern sample demonstrated optimal color uniformity because this nano-pattern exhibited an excellent diffusion ability owing to its pitch size. In addition to color uniformity, the use of this nano-pattern improved the luminous efficiency.

Compliance-Free ZrO/ZrO /ZrO Resistive Memory with Controllable Interfacial Multistate Switching Behaviour.

A controllable transformation from interfacial to filamentary switching mode is presented on a ZrO/ZrO /ZrO tri-layer resistive memory. The two switching modes are investigated with possible switching and transformation mechanisms proposed. Resistivity modulation of the ZrO layer is proposed to be responsible for the switching in the interfacial switching mode through injecting/retracting of oxygen ions.

Breakthrough to Non-Vacuum Deposition of Single-Crystal, Ultra-Thin, Homogeneous Nanoparticle Layers: A Better Alternative to Chemical Bath Deposition and Atomic Layer Deposition.

Most thin-film techniques require a multiple vacuum process, and cannot produce high-coverage continuous thin films with the thickness of a few nanometers on rough surfaces. We present a new "paradigm shift" non-vacuum process to deposit high-quality, ultra-thin, single-crystal layers of coalesced sulfide nanoparticles (NPs) with controllable thickness down to a few nanometers, based on thermal decomposition. This provides high-coverage, homogeneous thickness, and large-area deposition over a rough surface, with little material loss or liquid chemical waste, and deposition rates of 10 nm/min.

Effect of non-conformal gold deposition on SERS related plasmonic effects.

Recently, a comprehensive three dimensional computational model based on rigorous coupled wave analysis (RCWA) has been developed to investigate the properties of surface plasmons resident on metal coated arrays of inverted pyramidal pits used for SERS sensing applications in the form of 'klarite'. This simulation tool allows the identification of a variety of dispersive features including propagating and localized surface plasmons as well as simple diffraction relating to the influence of geometrical features. In this paper, we investigate the influence of non-conformality of the gold coating over the internal surfaces of the inverted pyramidal pits on plasmon dispersion.

Design and fabrication of a 3D-structured gold film with nanopores for local electric field enhancement in the pore.

Three-dimensionally structured gold membrane films with nanopores of defined, periodic geometries are designed and fabricated to provide the spatially localised enhancement of electric fields by manipulation of the plasmons inside nanopores. Square nanopores of different size and orientation relative to the pyramid are considered for films in aqueous and air environments, which allow for control of the position of electric fields within the structure. Designs suitable for use with 780 nm light were created.

Bridging the "green gap" of LEDs: giant light output enhancement and directional control of LEDs via embedded nano-void photonic crystals.

Green LEDs do not show the same level of performance as their blue and red cousins, greatly hindering the solid-state lighting development, which is the so-called "green gap". In this work, nano-void photonic crystals (NVPCs) were fabricated to embed within the GaN/InGaN green LEDs by using epitaxial lateral overgrowth (ELO) and nano-sphere lithography techniques. The NVPCs act as an efficient scattering back-reflector to outcouple the guided and downward photons, which not only boost the light extraction efficiency of LEDs with an enhancement of 78% but also collimate the view angle of LEDs from 131.

Toward omnidirectional light absorption by plasmonic effect for high-efficiency flexible nonvacuum Cu(In,Ga)Se2 thin film solar cells.

We have successfully demonstrated a great advantage of plasmonic Au nanoparticles for efficient enhancement of Cu(In,Ga)Se2(CIGS) flexible photovoltaic devices. The incorporation of Au NPs can eliminate obstacles in the way of developing ink-printing CIGS flexible thin film photovoltaics (TFPV), such as poor absorption at wavelengths in the high intensity region of solar spectrum, and that occurs significantly at large incident angle of solar irradiation. The enhancement of external quantum efficiency and photocurrent have been systematically analyzed via the calculated electromagnetic field distribution.

Reflectance properties of silicon moth-eyes in response to variations in angle of incidence, polarisation and azimuth orientation.

We report a study of the optical properties of silicon moth-eye structures using a custom-made fully automated broadband spectroscopic reflectometry system (goniometer). This measurement system is able to measure specular reflectance as a function of wavelength, polar incidence angle and azimuth orientation angle, from normal to near-parallel polar incidence angle. The system uses a linear polarized broadband super-continuum laser light source.

Broadband stimulated four-wave parametric conversion on a tantalum pentoxide photonic chip.

We exploit the large third order nonlinear susceptibility (χ(3) or "Chi 3") of tantalum pentoxide (Ta(2)O(5)) planar waveguides and realize broadband optical parametric conversion on-chip. We use a co-linear pump-probe configuration and observe stimulated four wave parametric conversion when seeding either in the visible or the infrared. Pumping at 800 nm we observe parametric conversion over a broad spectral range with the parametric idler output spanning from 1200 nm to 1600 nm in infrared wavelengths and from 555 nm to 600 nm in visible wavelengths.

Emission characteristics of photonic crystal light-emitting diodes.

Experimentally measured optical properties of photonic crystal LEDs are reported here. Photonic crystal and photonic quasi-crystal structures were fabricated on GaN epilayer LED wafer material using both direct-write electron beam lithography and nanoimprint lithography. Some of these structures were processed to make finished LEDs.

A characterization of the Raman modes in a J-aggregate-forming dye: a comparison between theory and experiment.

J-Aggregates are a class of organic molecules that possess several interesting characteristics that make them attractive for a range of organic-based optoelectronic devices. We present experimental and computer-simulation studies of the Raman-active vibrational modes in the J-aggregate-forming dye 5,6-dichloro-2-[[5,6-dichloro-1-ethyl-3-(4-sulfobutyl)benzimidazol-2-ylidene]propenyl]-1-ethyl-3-(4-sulfobutyl)benzimidazolium hydroxide, sodium salt, inner salt. The molecular monomer and dimer are analyzed computationally and the Raman mode energies extracted.

Chi 3 dispersion in planar tantalum pentoxide waveguides in the telecommunications window.

We report on the dispersion of the third-order nonlinear susceptibility (chi(3) or "Chi 3") in planar Ta2O5 waveguides in the telecommunications spectral window. We utilize the observation of third-harmonic generation under ultrashort pulsed excitation as a reference-free characterization method of chi(3) and obtain a large nonlinear coefficient, 2x10(-13) esu, at 1550 nm. Our observation of efficient third-harmonic generation in Ta2O5 waveguides in the telecoms window reveals the potential of this material system in high-speed integrated nonlinear optical switches.

Observation of the developing optical continuum along a nonlinear waveguide.

We describe what is to our knowledge the first nondestructive measurement of the evolution of an optical continuum as a function of distance along a nonlinear waveguide. Spectral mapping is achieved on a subwavelength scale by utilizing near-field microscopy to probe the waveguide's evanescent field. The measured continuum broadening along the waveguide agrees in general form with predictions of broadening from theoretical calculations, but differs in some important details.

Tuning localized plasmons in nanostructured substrates for surface-enhanced Raman scattering.

Comprehensive reflectivity mapping of the angular dispersion of nanostructured arrays comprising of inverted pyramidal pits is demonstrated. By comparing equivalently structured dielectric and metallic arrays, diffraction and plasmonic features are readily distinguished. While the diffraction features match expected theory, localised plasmons are also observed with severely flattened energy dispersions.