Improved silicon solar cells by tuning angular response to solar trajectory.

Silicon solar cell costs are reducing dramatically with these cells now providing the majority of new electricity generation capacity worldwide. Cost reduction has been via economies of scale and steadily increasing sunlight energy conversion efficiency. The best experimental cells at 27.

Probing Nanoscale Charge Transport Mechanisms in Quasi-2D Halide Perovskites for Photovoltaic Applications.

Quasi-2D layered halide perovskites (quasi-2DLPs) have emerged as promising materials for photovoltaic (PV) applications owing to their advantageous bandgap for absorbing visible light and the improved stability they enable. Their charge transport mechanism is heavily influenced by the grain orientation of their crystals as well as their nanostructures, such as grain boundaries (GBs) and edge states─the formation of which is inevitable in polycrystalline quasi-2DLP thin films. Despite their importance, the impact of these features on charge transport remains unexplored.

Unveiling the Role of Ge in CZTSSe Solar Cells by Advanced Micro-To-Atom Scale Characterizations.

Kesterite is an earth-abundant energy material with high predicted power conversion efficiency, making it a sustainable and promising option for photovoltaics. However, a large open circuit voltage V deficit due to non-radiative recombination at intrinsic defects remains a major hurdle, limiting device performance. Incorporating Ge into the kesterite structure emerges as an effective approach for enhancing performance by manipulating defects and morphology.

Multifunctional Surface Treatment against Imperfections and Halide Segregation in Wide-Band Gap Perovskite Solar Cells.

Mixed-halide wide-band gap perovskites (WBPs) still suffer from losses due to imperfections within the absorber and the segregation of halide ions under external stimuli. Herein, we design a multifunctional passivator (MFP) by mixing bromide salt, formamidinium bromide (FABr) with a p-type self-assembled monolayer (SAM) to target the nonradiative recombination pathways. Photoluminescence measurement shows considerable suppression of nonradiative recombination rates after treatment with FABr.

Barrier Strategy for Strain-Free Encapsulation of Perovskite Solar Cells.

The performance loss caused by encapsulation has been an obstacle to guarantee the excellent power conversion efficiency of perovskite solar cells (PSCs) in practical application. This work revealed that the encapsulation-induced performance loss is highly related to the tensile strains imposed on the functional layers of the device when the PSC is exposed directly to the deformed encapsulant. A barrier strategy is developed by employing a nonadhesive barrier layer to isolate the deformed encapsulant from the PSC functional layer, achieving a strain-free encapsulation of the PSCs.

Cd-Free Pure Sulfide Kesterite Cu ZnSnS Solar Cell with Over 800 mV Open-Circuit Voltage Enabled by Phase Evolution Intervention.

The Cd-free Cu ZnSnS (CZTS) solar cell is an ideal candidate for producing low-cost clean energy through green materials owing to its inherent environmental friendliness and earth abundance. Nevertheless, sulfide CZTS has long suffered from severe open-circuit voltage (V ) deficits, limiting the full exploitation of performance potential and further progress. Here, an effective strategy is proposed to alleviate the nonradiative V loss by manipulating the phase evolution during the critical kesterite phase formation stage.

Emerging Chalcohalide Materials for Energy Applications.

Semiconductors with multiple anions currently provide a new materials platform from which improved functionality emerges, posing new challenges and opportunities in material science. This review has endeavored to emphasize the versatility of the emerging family of semiconductors consisting of mixed chalcogen and halogen anions, known as "chalcohalides". As they are multifunctional, these materials are of general interest to the wider research community, ranging from theoretical/computational scientists to experimental materials scientists.

Revealing the Dynamics of the Thermal Reaction between Copper and Mixed Halide Perovskite Solar Cells.

Copper (Cu) is present not only in the electrode for inverted-structure halide perovskite solar cells (PSCs) but also in transport layers such as copper iodide (CuI), copper thiocyanate (CuSCN), and copper phthalocyanine (CuPc) alternatives to spiro-OMeTAD due to their improved thermal stability. While Cu or Cu-incorporated materials have been effectively utilized in halide perovskites, there is a lack of thorough investigation on the direct reaction between Cu and a perovskite under thermal stress. In this study, we investigated the thermal reaction between Cu and a perovskite as well as the degradation mechanism by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Kelvin probe force microscopy (KPFM).

Revealing Dynamic Effects of Mobile Ions in Halide Perovskite Solar Cells Using Time-Resolved Microspectroscopy.

Halide perovskites are promising candidate materials for the next generation high-efficiency optoelectronic devices. Since perovskites are electronic-ionic mixed conductors, ion dynamics have a critical impact on the performance and stability of perovskite-based applications. However, comprehensively understanding ionic dynamics is challenging, particularly on nanoscale imaging of ionic dynamics in perovskites.

Large-Grain Spanning Monolayer Cu ZnSnSe Thin-Film Solar Cells Grown from Metal Precursor.

The persistent double layer structure whereby two layers with different properties form at the front and rear of absorbers is a critical challenge in the field of kesterite thin-film solar cells, which imposes additional nonradiative recombination in the quasi-neutral region and potential limitation to the transport of hole carriers. Herein, an effective model for growing monolayer CZTSe thin-films based on metal precursors with large grains spanning the whole film is developed. Voids and fine grain layer are avoided successfully by suppressing the formation of a Sn-rich liquid metal phase near Mo back contact during alloying, while grain coarsening is greatly promoted by enhancing mass transfer during grain growth.

Immediate and Temporal Enhancement of Power Conversion Efficiency in Surface-Passivated Perovskite Solar Cells.

This work reports strategies for improving the power conversion efficiency (PCE) by capitalizing on temporal changes through the storage effect and immediate improvements by interface passivation. It is demonstrated that both strategies can be combined as shown by PCE improvement in passivated perovskite solar cells (PSCs) upon ambient storage because of trap density reduction. By analyzing the dominant charge recombination process, we find that lead-related traps in perovskite bulk, rather than at the surface, are the recombination centers in both as-fabricated and ambient-stored passivated PSCs.

Kesterite Solar Cells: Insights into Current Strategies and Challenges.

Earth-abundant and environmentally benign kesterite CuZnSn(S,Se) (CZTSSe) is a promising alternative to its cousin chalcopyrite Cu(In,Ga)(S,Se) (CIGS) for photovoltaic applications. However, the power conversion efficiency of CZTSSe solar cells has been stagnant at 12.6% for years, still far lower than that of CIGS (23.

Defect Control for 12.5% Efficiency Cu ZnSnSe Kesterite Thin-Film Solar Cells by Engineering of Local Chemical Environment.

Kesterite-based Cu ZnSn(S,Se) semiconductors are emerging as promising materials for low-cost, environment-benign, and high-efficiency thin-film photovoltaics. However, the current state-of-the-art Cu ZnSn(S,Se) devices suffer from cation-disordering defects and defect clusters, which generally result in severe potential fluctuation, low minority carrier lifetime, and ultimately unsatisfactory performance. Herein, critical growth conditions are reported for obtaining high-quality Cu ZnSnSe absorber layers with the formation of detrimental intrinsic defects largely suppressed.

Gas chromatography-mass spectrometry analyses of encapsulated stable perovskite solar cells.

Although perovskite solar cells have produced remarkable energy conversion efficiencies, they cannot become commercially viable without improvements in durability. We used gas chromatography-mass spectrometry (GC-MS) to reveal signature volatile products of the decomposition of organic hybrid perovskites under thermal stress. In addition, we were able to use GC-MS to confirm that a low-cost polymer/glass stack encapsulation is effective in suppressing such outgassing.

Acetic Acid Assisted Crystallization Strategy for High Efficiency and Long-Term Stable Perovskite Solar Cell.

Improving the quality of perovskite poly-crystalline film is essential for the performance of associated solar cells approaching their theoretical limit efficiency. Pinholes, unwanted defects, and nonperovskite phase can be easily generated during film formation, hampering device performance and stability. Here, a simple method is introduced to prepare perovskite film with excellent optoelectronic property by using acetic acid (Ac) as an antisolvent to control perovskite crystallization.

Unveiling the Relationship between the Perovskite Precursor Solution and the Resulting Device Performance.

For the fabrication of perovskite solar cells (PSCs) using a solution process, it is essential to understand the characteristics of the perovskite precursor solution to achieve high performance and reproducibility. The colloids (iodoplumbates) in the perovskite precursors under various conditions were investigated by UV-visible absorption, dynamic light scattering, photoluminescence, and total internal reflection fluorescence microscopy techniques. Their local structure was examined by in situ X-ray absorption fine structure studies.

The Impact of a Dynamic Two-Step Solution Process on Film Formation of Cs (MA FA ) PbI Perovskite and Solar Cell Performance.

This paper provides deep understanding of the formation mechanism of perovskite film fabricated by sequential solution-based methods. It compares two sequential spin-coating methods for Cs (MA FA ) PbI perovskite. First is the "static process," with a stoppage between the two spin-coating steps (1st PbI -CsI-dimethyl sulfoxide (DMSO)-dimethylformamide (DMF) and 2nd methylammonium iodide (MAI)-formamidinium iodide (FAI)-isopropyl alcohol).

Light- and bias-induced structural variations in metal halide perovskites.

Organic-inorganic metal halide perovskites have gained considerable attention for next-generation photovoltaic cells due to rapid improvement in power conversion efficiencies. However, fundamental understanding of underlying mechanisms related to light- and bias-induced effects at the nanoscale is still required. Here, structural variations of the perovskites induced by light and bias are systematically investigated using scanning probe microscopy techniques.

The Impact of parasitic loss on solar cells with plasmonic nano-textured rear reflectors.

Significant photocurrent enhancement has been demonstrated using plasmonic light-trapping structures comprising nanostructured metallic features at the rear of the cell. These structures have conversely been identified as suffering heightened parasitic absorption into the metal at certain resonant wavelengths severely mitigating benefits of light trapping. In this study, we undertook simulations exploring the relationship between enhanced absorption into the solar cell, and parasitic losses in the metal.

Accelerated Lifetime Testing of Organic-Inorganic Perovskite Solar Cells Encapsulated by Polyisobutylene.

Metal halide perovskite solar cells (PSCs) have undergone rapid progress. However, unstable performance caused by sensitivity to environmental moisture and high temperature is a major impediment to commercialization of PSCs. In the present work, a low-temperature, glass-glass encapsulation technique using high performance polyisobutylene (PIB) as the moisture barrier is investigated on planar glass/FTO/TiO/FAPbI/PTAA/gold perovskite solar cells.

Energy conversion approaches and materials for high-efficiency photovoltaics.

The past five years have seen significant cost reductions in photovoltaics and a correspondingly strong increase in uptake, with photovoltaics now positioned to provide one of the lowest-cost options for future electricity generation. What is becoming clear as the industry develops is that area-related costs, such as costs of encapsulation and field-installation, are increasingly important components of the total costs of photovoltaic electricity generation, with this trend expected to continue. Improved energy-conversion efficiency directly reduces such costs, with increased manufacturing volume likely to drive down the additional costs associated with implementing higher efficiencies.

Realistic Silver Optical Constants for Plasmonics.

Silver remains the preferred conductor for optical and near-infrared plasmonics. Many high-profile studies focus exclusively on performance simulation in such applications. Almost invariably, these use silver optical data either from Palik's 1985 handbook or, more frequently, an earlier Johnson and Christy (J&C) tabulation.

Mobile Ion Induced Slow Carrier Dynamics in Organic-Inorganic Perovskite CH₃NH₃PbBr₃.

Here, we investigate photoluminescence (PL) and time-resolved photoluminescence (TRPL) in CH3NH3PbBr3 perovskite under continuous illumination, using optical and electro-optical techniques. Under continuous excitation at constant intensity, PL intensity and PL decay (carrier recombination) exhibit excitation intensity dependent reductions in the time scale of seconds to minutes. The enhanced nonradiative recombination is ascribed to light activated negative ions and their accumulation which exhibit a slow dynamics in a time scale of seconds to minutes.