IEEE Trans Ultrason Ferroelectr Freq Control
December 2022
This study presents a finite element method (FEM) approach to estimate the effective medium parameters of 2-D and 3-D layers of arbitrary composition. The resonance frequency of a layer to be investigated is found by exciting the layer with plane waves and studying the reflected sound pressure from the layer as a function of frequency and incidence angle. This allowed for the calculation of compressional and shear wave velocities.
View Article and Find Full Text PDFA single crystal/epoxy 1-3 composite plate transducer with air backing and two acoustic matching layers was modelled, fabricated and compared to a similar PZT transducer. For the relevant underwater applications, the usable frequency band is restricted by reactive electrical power. The design goal was to provide an underwater transmitter that could be operated over a wide range of frequencies, but not necessarily create a single pulse spanning the entire frequency band.
View Article and Find Full Text PDFIEEE Trans Ultrason Ferroelectr Freq Control
October 2020
New ultrasound-mediated drug delivery systems, such as acoustic cluster therapy or combined imaging and therapy systems, require transducers that can operate beyond the bandwidth limitation (~100%) of conventional piezoceramic transducers. In this article, a dual-frequency coupled resonator transducer (CRT) comprised of a polymeric coupling layer with a low acoustic impedance (2-5 MRayl) sandwiched between two piezoceramic layers is investigated. Depending on the electrical configuration, the CRT exhibits two usable frequency bands.
View Article and Find Full Text PDFUltrasound Med Biol
September 2019
Acoustic Cluster Therapy (ACT) is a two-component formulation of commercially available microbubbles (Sonazoid; GE Healthcare, Oslo, Norway) and microdroplets (perfluorated oil) currently under development for cancer treatment. The microbubbles and microdroplets have opposite surface charges to form microbubble/microdroplet clusters, which are administered to patients together with a drug. When the clusters and drug reach the target tumour, two ultrasound (US) exposure regimes are used: First, high-frequency (>2.
View Article and Find Full Text PDFIEEE Trans Ultrason Ferroelectr Freq Control
January 2019
New ultrasound imaging and therapeutic modalities may require transducer designs that are not readily facilitated by conventional design guidelines and analytical expressions. This motivates the investigation of numerical methods for complex transducer structures. Based on a mathematical theorem, we propose a new numerical design and optimization method for ultrasound transducers by linearizing the phase spectrum of transducer transfer functions.
View Article and Find Full Text PDFIn this study, the phenomenon of higher harmonic thickness resonance of a piezoelectric transducer was used to investigate potentially additional sensitivity at the third harmonic frequency for conventional medical transducers. The motivation for this research is that some applications in medical ultrasound (e.g.
View Article and Find Full Text PDFIEEE Trans Ultrason Ferroelectr Freq Control
October 2008
Mechanically scanned transducers are currently used for tissue harmonic imaging (THI) and nonlinear microbubble imaging at high frequencies. The pulse inversion (PI) technique is widely used for suppressing the fundamental signal, but its effectiveness is reduced by relative tissue/transducer motion. In this paper, we investigate multipulse inversion (MPI) sequences that achieve a significant improvement on the fundamental suppression for mechanically scanned single-element transducers.
View Article and Find Full Text PDFUltrasound Med Biol
December 2007
The feasibility of subharmonic contrast intravascular ultrasound (IVUS) imaging was investigated using a prototype nonlinear IVUS system and the commercial contrast agent Definity . The system employed a mechanically scanned commercial catheter with a custom transducer element fabricated to have sensitivity at both 15 and 30 MHz. Experiments were conducted at a fundamental frequency of 30 MHz (F30; 25% bandwidth), with on-axis pressures ranging from 0.
View Article and Find Full Text PDFUltrasound Med Biol
November 2006
Recent studies have shown the feasibility of tissue and contrast harmonic imaging with a prototype nonlinear intravascular ultrasound (IVUS) system using a conventional single-element rotating IVUS catheter. In this study, a dual-frequency transducer element was mounted in an IVUS catheter and its second harmonic imaging performance was investigated and compared with that of a conventional IVUS catheter. Hydrophone measurements showed a transmit efficiency improvement of >6 dB for the dual-frequency catheter at 20 MHz.
View Article and Find Full Text PDFIEEE Trans Ultrason Ferroelectr Freq Control
October 2006
Tissue harmonic imaging (THI) has been shown to increase image quality of medical ultrasound in the frequency range from 2 to 10 MHz and might, therefore, also be used to improve image quality in intravascular ultrasound (IVUS). In this study we constructed a prototype IVUS system that could operate in both fundamental frequency and second harmonic imaging modes. This system uses a conventional, continuously rotating, single-element IVUS catheter and was operated in fundamental 20 MHz, fundamental 40 MHz, and harmonic 40 MHz modes (transmit 20 MHz, receive 40 MHz).
View Article and Find Full Text PDFRecently, in vivo feasibility of tissue harmonic imaging with a mechanically rotated intravascular ultrasound (IVUS) catheter was experimentally demonstrated. To isolate the second harmonic signal content, a combination of pulse inversion and analog filtering was used. In this paper the development of a simulation tool to investigate nonlinear IVUS beams is reported, and the influence of transducer rotation and axial catheter-to-tissue motion on the efficiency of PI signal processing is evaluated.
View Article and Find Full Text PDFObjective: We sought to investigate feasibility of vasa vasorum imaging using the novel technique of contrast harmonic intravascular ultrasound.
Methods: Prototype intravascular ultrasound (IVUS) instrumentation was developed for the sensitive detection of micro-bubble contrast agents. The technique, "harmonic" imaging, involves transmitting ultrasound at 20 MHz (fundamental) and detecting contrast signals at 40 MHz (second harmonic).
An experimental lipid encapsulated contrast agent comprised substantially of micrometer to submicrometer diameter bubbles was evaluated for its capacity to produce nonlinear scattering in response to high transmit frequencies. Agent characterization experiments were conducted at transmit frequencies of 20 and 30 MHz with bandwidths of 5, 15 and 25% using a broadband focused PVDF transducer. The presence of subharmonic energy was observed for all bandwidths at a wide range of pressures (0.
View Article and Find Full Text PDFNonlinear contrast agent imaging with intravascular ultrasound (IVUS) is investigated using a prototype IVUS system and an experimental small bubble contrast agent. The IVUS system employed a mechanically scanned single element transducer and was operated at a 20 MHz transmit frequency (F20) for second harmonic imaging (H40), and at a 40 MHz transmit frequency (F40) for subharmonic imaging (SH20). Characterization experiments were performed with agent and tissue phantom signals acquired during transducer rotation.
View Article and Find Full Text PDFIEEE Trans Ultrason Ferroelectr Freq Control
December 2005
A recent study has shown the feasibility of tissue harmonic imaging (THI) using an intravascular ultrasound (IVUS) transducer. This correspondence describes the design, fabrication, and characterization of a THI-optimized piezoelectric transducer with oval aperture of 0.75 mm by 1 mm.
View Article and Find Full Text PDF