Efficient microbial cellulose/FeO nanocomposite for photocatalytic degradation by advanced oxidation process of textile dyes.

Fenton-type advanced oxidative processes (AOP) have been employed to treat textile dyes in aqueous solution and industrial effluent. The work focused on assisting the limitations still presented by the Fenton process regarding the use of suspended iron catalysts. Soon, a nanocomposite of bacterial cellulose (BC) and magnetite (FeO) was developed.

Original nanostructured bacterial cellulose/pyrite composite: Photocatalytic application in advanced oxidation processes.

The development of an original catalytic composite of bacterial cellulose (BC) and pyrite (FeS) for environmental application was the objective of this study. Nanoparticles of the FeS were synthesized from the hydrothermal method and immobilized on the BC structure using ex situ methodology. In the BC, the FTIR and XRD analyzes showed the absorption band associated with the Fe-S bond and crystalline peaks attributed to the pyrite.

Treatment of textile matrices using Fenton processes: influence of operational parameters on degradation kinetics, ecotoxicity evaluation and application in real wastewater.

Since conventional processes for treating textile effluents have limitations, this work aimed to investigate the application of advanced oxidation technology in this type of matrix. Initially, for a textile dyes mixture in solution, the photo-Fenton/sunlight process proved to be the most efficient among other systems tested. During the tests it was found that the degradation kinetics depends of the pH and catalyst and oxidant concentrations.

Degradation of the residual textile mixture cetyltrimethylammonium bromide/remazol yellow gold RNL-150%/reactive blue BF-5G: evaluation photo-peroxidation and photo-Fenton processes in LED and UV-C photoreactors.

This article presents a study on the degradation of a residual textile mixture composed of cationic surfactant cetyltrimethylammonium bromide (CTAB) and the remazol yellow gold RNL-150% and reactive blue BF-5G textile dyes. This was carried out by employing the photo-peroxidation and photo-Fenton processes in LED and UV-C photoreactors. The photo-Fenton process was the most efficient as regards the degradation of the CTAB and dye mixture, for both types of radiation.

Investigation of paracetamol degradation using LED and UV-C photo-reactors.

This work investigates the efficiency of LED and UV-C photo-reactors for paracetamol degradation using advanced oxidative processes. Among the evaluated processes, photo-Fenton was the most efficient for both radiations. Degradations greater than 81% (λ 197 nm) and 91% (λ 243 nm) were obtained in the kinetic study.

Kinetic study of dye removal using TiO supported on polyethylene terephthalate by advanced oxidation processes through neural networks.

This work investigated the efficiency of polyethylene terephthalate (PET) as support material for TiO films in the photocatalytic degradation of red Bordeaux and yellow tartrazine dyes. The optimum operating conditions were determined by a factorial design, which resulted after 180 min of treatment in degradations of 99.5% and 99.

Application of the advanced oxidative process on the degradation of the green leaf and purple açaí food dyes with kinetic monitoring and artificial neural network modelling.

The study evaluated the advanced oxidative processes concerning the degradation of green leaf and purple açaí dyes, as well as the prediction of data through artificial neural networks (ANNs). It was verified that percentage of degradation on the wavelengths (λ) of 215, 248, 523 and 627 nm was 5.95, 49.

Degradation of textile dyes Remazol Yellow Gold and reactive Turquoise: optimization, toxicity and modeling by artificial neural networks.

In this work, the degradation of Remazol Yellow Gold RNL-150% and Reactive Turquoise Q-G125 were investigated using AOP: photolysis, UV/HO, Fenton and photo-Fenton. It was found that the photo-Fenton process employing sunlight radiation was the most efficient, obtaining percentages of degradation above 87%. The ideal conditions for the degradation of the dyes were determined from a factorial design 2 and study of the [HO] ([HO] equal to 100 mg·L); [Fe] equal to 1 mg·L and pH between 3 and 4.

Use of TiO photocatalyst supported on residues of polystyrene packaging and its applicability on the removal of food dyes.

This work proposes the use of plastic residues, more specifically polystyrene packaging, to support TiO, used as a photocatalyst in the degradation of erythrosine and Brilliant Blue food dyes. The scanning electron microscopy and Fourier transform infrared spectroscopy analyses exhibited the surface coating and the presence of TiO in the material, respectively. The UV/HO/TiO process was used in the preliminary study, given the high percentage of degradation, operational advantages and greater reductions in peaks related to the aromatic rings when compared to the other processes studied.

Adsorption of azo dyes using peanut hull and orange peel: a comparative study.

This work proposes the use of agro-industrial wastes, specifically peanut hull (HP) and orange peel (OP), as adsorbents for dyes, such as Remazol Golden Yellow RNL-150% (RYG), Gray Reactive BF-2R (RG) and Reactive Turquoise Q-G125 (RT). Characterization by Brunauer-Emmett-Teller indicates that the adsorbents are mesoporous, with pHzpc values of 5.0 for HP and 4.