Pencil Graphite Electrocatalytic Sensors Modified by Pyrene Coated Reduced Graphene Oxide Decorated with Molybdenum Disulfide Nanoroses for Hydrazine and 4-Nitrophenol Detection in Real Water Samples.

Novel nanostructured platforms based on Pencil Graphite Electrodes (PGEs), modified with pyrene carboxylic acid (PCA) functionalized Reduced Graphene Oxide (rGO), and then decorated by chronoamperometry electrodeposition of MoS nanoroses (NRs) (MoSNRs/PCA-rGO/PGEs) were manufactured for the electrocatalytic detection of hydrazine (NH) and 4-nitrophenol, pollutants highly hazardous for environment and human health. The surface morphology and chemistry of the MoSNRs/PCA-rGO/PGEs were characterized by scanning electron microscopy (SEM), Raman, and X-ray photoelectron spectroscopy (XPS), assessing the coating of the PCA-rGO/PGEs by dense multilayers of NRs. NH and 4-nitrophenol have been monitored by Differential Pulse Voltammetry (DPV), and the MoSNRs/PCA-rGO/PGEs electroanalytical properties have been compared to the PGEs, as neat and modified by PCA-rGO.

Prevalence and Characteristics of Adolescents with Autism Spectrum Disorder in the New York-New Jersey Metropolitan Area.

Purpose: Almost all epidemiologic studies estimating autism spectrum disorder (ASD) prevalence have focused on school-age children. This study provides the first population-based data on the prevalence and expression of ASD among adolescents in a large US metropolitan region.

Methods: Active multiple source ASD surveillance of adolescents aged 16-years was conducted according to the Autism and Developmental Disabilities Monitoring (ADDM) Network method in a four-county New Jersey metropolitan region.

Electrochemical Sensors Based on Au Nanoparticles Decorated Pyrene-Reduced Graphene Oxide for Hydrazine, 4-Nitrophenol and Hg Detection in Water.

Monitoring hazardous chemical compounds such as hydrazine (N2H4), 4-nitrophenol (4-NP) and Hg2+ in natural water resources is a crucial issue due to their toxic effects on human health and catastrophic impact on the environment. Electrochemical nanostructured platforms integrating hybrid nanocomposites based on graphene derivatives and inorganic nanoparticles (NPs) are of great interest for such a purpose. In this work, disposable screen-printed carbon electrodes (SPCEs) have been modified with a hybrid nanocomposite formed by reduced graphene oxide (RGO), functionalized by 1-pyrene carboxylic acid (PCA), and decorated by colloidal Au NPs.

Defining in Detail and Evaluating Reliability of DSM-5 Criteria for Autism Spectrum Disorder (ASD) Among Children.

This paper describes a process to define a comprehensive list of exemplars for seven core Diagnostic and Statistical Manual (DSM) diagnostic criteria for autism spectrum disorder (ASD), and report on interrater reliability in applying these exemplars to determine ASD case classification. Clinicians completed an iterative process to map specific exemplars from the CDC Autism and Developmental Disabilities Monitoring (ADDM) Network criteria for ASD surveillance, DSM-5 text, and diagnostic assessments to each of the core DSM-5 ASD criteria. Clinicians applied the diagnostic exemplars to child behavioral descriptions in existing evaluation records to establish initial reliability standards and then for blinded clinician review in one site (phase 1) and for two ADDM Network surveillance years (phase 2).

Molecularly imprinted curcumin nanoparticles decorated paper for electrochemical and fluorescence dual-mode sensing of bisphenol A.

A molecularly imprinted paper-based analytical device (MIP-μPAD) was developed for the sensing of bisphenol A (BPA). The platform was screen-printed onto a filter paper support, where the electrodes and the fluorescence μPADs were designed. Owing to its dual electrochemical and fluorescence responses, molecularly imprinted curcumin nanoparticles were used to sense BPA.

Curcumin graphite pencil electrode modified with molybdenum disulfide nanosheets decorated gold foams for simultaneous quantification of nitrite and hydrazine in water samples.

A non-enzymatic sensor based on a curcumin modified pencil graphite electrode, loaded with molybdenum disulfide nanosheets decorated gold foam, was constructed. Herein, the electrochemical deposition strategy was adopted throughout the sensing platform design stepwise. The electroactivity of the pencil electrode platform enables sensitive simultaneous quantification of hydrazine and nitrite where the respective working potentials typically are at + 0.

From Eat to trEat: engineering the mitochondrial Eat1 enzyme for enhanced ethyl acetate production in .

Background: Genetic engineering of microorganisms has become a common practice to establish microbial cell factories for a wide range of compounds. Ethyl acetate is an industrial solvent that is used in several applications, mainly as a biodegradable organic solvent with low toxicity. While ethyl acetate is produced by several natural yeast species, the main mechanism of production has remained elusive until the discovery of Eat1 in .

Multilevel optimisation of anaerobic ethyl acetate production in engineered .

Background: Ethyl acetate is a widely used industrial solvent that is currently produced by chemical conversions from fossil resources. Several yeast species are able to convert sugars to ethyl acetate under aerobic conditions. However, performing ethyl acetate synthesis anaerobically may result in enhanced production efficiency, making the process economically more viable.

Reduced graphene oxide nanosheets modified with nickel disulfide and curcumin nanoparticles for non-enzymatic electrochemical sensing of methyl parathion and 4-nitrophenol.

A method was designed for simultaneous voltammetric determination of methyl parathion pesticide (MP) and 4-nitrophenol (4-NP). Curcumin nanoparticles were deposited on reduced graphene oxide nanosheets that were modified with nickel disulfide. The material was placed on a screen-printed carbon electrode and then displayed high electrocatalytic activities toward MP and 4-NP, with a peak potential near -0.

Voltammetric simultaneous quantification of p-nitrophenol and hydrazine by using magnetic spinel FeCoO nanosheets on reduced graphene oxide layers modified with curcumin-stabilized silver nanoparticles.

A sensor based on a screen-printed carbon electrode loaded with curcumin-stabilized silver nanoparticle-coated reduced graphene oxide magnetic spinel (FeCoO) nanosheets was constructed. The electrocatalytic activity of the electrode enables sensitive simultaneous quantification of hydrazine and p-nitrophenol. The respective working potentials typically are at +0.

Microbial production of short and medium chain esters: Enzymes, pathways, and applications.

Sustainable production of bulk chemicals is one of the major challenges in the chemical industry, particularly due to their low market prices. This includes short and medium chain esters, which are used in a wide range of applications, for example fragrance compounds, solvents, lubricants or biofuels. However, these esters are produced mainly through unsustainable, energy intensive processes.

Design of a redox-active surface for ultrasensitive redox capacitive aptasensing of aflatoxin M1 in milk.

Herein, we report the design of a novel label-free aptasensor based on ferrocene and silicon nanoparticles (SiNPs) for ultrasensitive detection of aflatoxin M1 (AFM1) in milk. Given that silicon nanomaterials stand out by their high capacitive power, we used them to develop a novel capacitive transduction system based on electrochemical capacitance spectroscopy (ECS). This strategy relies on the changes of the redox capacitance signal owed to the surface-tethered ferrocene film, by performing electrochemical impedance spectroscopy (EIS) measurements without using an external redox probe.

Contribution of Eat1 and Other Alcohol Acyltransferases to Ester Production in .

Esters are essential for the flavor and aroma of fermented products, and are mainly produced by alcohol acyl transferases (AATs). A recently discovered AAT family named Eat (Ethanol acetyltransferase) contributes to ethyl acetate synthesis in yeast. However, its effect on the synthesis of other esters is unknown.

Graphene nanosheets modified with curcumin-decorated manganese dioxide for ultrasensitive potentiometric sensing of mercury(II), fluoride and cyanide.

A glassy carbon electrode (GCE) was modified by electropolymerization of curcumin on MnO-Gr nanosheets to obtain a detection method for Hg(II) and for the anions fluoride and cyanide. The complexation by curcumin can be monitored by potentiometry. The results revealed a cathodic shift for the simultaneous detection of fluoride and cyanide and an anodic shift for the mercury(II) sensing, with peak potentials of -0.

Curcumin-graphene quantum dots for dual mode sensing platform: Electrochemical and fluorescence detection of APOe4, responsible of Alzheimer's disease.

New dual electrochemical and fluorescence sensitive curcumin-graphene quantum dots sensing platform coated on the transparent Indium-Tin-Oxide electrode was developed to sense APOe4 DNA, responsible of Alzheimer's disease. Curcumin molecule with its dual fluorescence and electrochemical properties was electropolymerized on GQDs-ITO surface. EDC/NHS chemistry was used to covalently immobilize an amino-substituted DNA probe via a malonic acid spacer.

Electrochemical immunoassay for lactalbumin based on the use of ferrocene-modified gold nanoparticles and lysozyme-modified magnetic beads.

The authors describe a method for electrochemical determination of the breast cancer biomarker α-lactalbumin (α-LA) using disposable screen-printed carbon electrodes (SPCEs). Lysozyme-conjugated FeO nanoparticles (Lys-FeONPs) were used to capture α-LA on the surface of the SPCEs which then is trapped in an immunosandwich using secondary antibodies labeled with ferrocene-modified gold nanoparticles. The amperometric response of ferrocene (recorded at +0.

Ultrasensitive sensing of Androctonus australis hector scorpion venom toxins in biological fluids using an electrochemical graphene quantum dots/nanobody-based platform.

Rapid and sensitive detection of low levels of scorpion venom toxins in biological fluids is of tremendous importance for decision-taking in cases of envenomation by scorpions stings. In Tunisia, at least 1200 severe envenomation cases by Androctonus australis hector (Aah) scorpion stings were reported annually. In this work, we report on a novel electrochemical immuno-sandwich to detect the Aah50 toxic fraction within the Aah scorpion venom using the bispecific nanobody format specially designed to highly recognize and neutralize the two most toxic molecules in the AahG50 venom fraction (i.

Alcohol Acetyltransferase Eat1 Is Located in Yeast Mitochondria.

Eat1 is a recently discovered alcohol acetyltransferase responsible for bulk ethyl acetate production in yeasts such as and These yeasts have the potential to become efficient bio-based ethyl acetate producers. However, some fundamental features of Eat1 are still not understood, which hampers the rational engineering of efficient production strains. The cellular location of Eat1 in yeast is one of these features.

Sublingual sufentanil for postoperative pain relief: first clinical experiences.

Background: The sublingual sufentanil tablet system (SSTS) is a novel hand-held patient-controlled analgesia device developed for treatment of moderate-to-severe postoperative pain. Here we present the first results of its clinical use.

Methods: Adult patients undergoing major surgery in five hospitals in the Netherlands received the SSTS for postoperative pain relief as part of multimodal pain management that further included paracetamol and a nonsteroidal anti-inflammatory drug (NSAID).

Monascus ruber as cell factory for lactic acid production at low pH.

A Monascus ruber strain was isolated that was able to grow on mineral medium at high sugar concentrations and 175g/l lactic acid at pH 2.8. Its genome and transcriptomes were sequenced and annotated.

Ethyl acetate production by the elusive alcohol acetyltransferase from yeast.

Ethyl acetate is an industrially relevant ester that is currently produced exclusively through unsustainable processes. Many yeasts are able to produce ethyl acetate, but the main responsible enzyme has remained elusive, hampering the engineering of novel production strains. Here we describe the discovery of a new enzyme (Eat1) from the yeast Wickerhamomyces anomalus that resulted in high ethyl acetate production when expressed in Saccharomyces cerevisiae and Escherichia coli.

Follow-up on commitments at the Third Global Forum on Human Resources for Health: Indonesia, Sudan, Tanzania : "A commitment is a promise, a promise is a debt".

This study sought to assess actions which Indonesia, Sudan, and Tanzania took to implement the health workforce commitments they made at the Third Global Forum on Human Resources for Health (HRH) in November 2013. The study was conducted through a survey of published and gray literature in English and field research consisting of direct contacts with relevant ministries and agencies. Results show that the three countries implemented interventions to translate their commitments into actions.

Metabolic Engineering of TCA Cycle for Production of Chemicals.

The tricarboxylic acid (TCA) cycle has been used for decades in the microbial production of chemicals such as citrate, L-glutamate, and succinate. Maximizing yield is key for cost-competitive production. However, for most TCA cycle products, the maximum pathway yield is lower than the theoretical maximum yield (Y(E)).

Metabolic engineering of the mixed-acid fermentation pathway of Escherichia coli for anaerobic production of glutamate and itaconate.

Itaconic acid, an unsaturated C5-dicarboxylic acid, is a biobased building block for the polymer industry. The purpose of this study was to establish proof of principle for an anaerobic fermentation process for the production of itaconic acid by modification of the mixed acid fermentation pathway of E. coli.