Bio-Inspired Micro- and Nano-Scale Surface Features Produced by Femtosecond Laser-Texturing Enhance TiZr-Implant Osseointegration.

Surface design plays a critical role in determining the integration of dental implants with bone tissue. Femtosecond laser-texturing has emerged as a breakthrough technology offering excellent uniformity and reproducibility in implant surface features. However, when compared to state-of-the-art sandblasted and acid-etched surfaces, laser-textured surface designs typically underperform in terms of osseointegration.

Immunomodulation Using BMP-7 and IL-10 to Enhance the Mineralization Capacity of Bone Progenitor Cells in a Fracture Hematoma-Like Environment.

Following biomaterial implantation, a failure to resolve inflammation during the formation of a fracture hematoma can significantly limit the biomaterial's ability to facilitate bone regeneration. This study aims to combine the immunomodulatory and osteogenic effects of BMP-7 and IL-10 with the regenerative capacity of collagen-hydroxyapatite (CHA) scaffolds to enhance in vitro mineralization in a hematoma-like environment. Incubation of CHA scaffolds with human whole blood leads to rapid adsorption of fibrinogen, significant stiffening of the scaffold, and the formation of a hematoma-like environment characterized by a limited capacity to support the infiltration of human bone progenitor cells, a significant upregulation of inflammatory cytokines and acute phase proteins, and significantly reduced osteoconductivity.

3D-Printed Poly(3-hydroxybutyrate--3-hydroxyhexanoate)-Cellulose-Based Scaffolds for Biomedical Applications.

While biomaterials have become indispensable for a wide range of tissue repair strategies, second removal procedures oftentimes needed in the case of non-bio-based and non-bioresorbable scaffolds are associated with significant drawbacks not only for the patient, including the risk of infection, impaired healing, or tissue damage, but also for the healthcare system in terms of cost and resources. New biopolymers are increasingly being investigated in the field of tissue regeneration, but their widespread use is still hampered by limitations regarding mechanical, biological, and functional performance when compared to traditional materials. Therefore, a common strategy to tune and broaden the final properties of biopolymers is through the effect of different reinforcing agents.

Ibuprofen-loaded electrospun poly(ethylene--vinyl alcohol) nanofibers for wound dressing applications.

Chronic wounds are characterized by a prolonged inflammation phase preventing the normal processes of wound healing and natural regeneration of the skin. To tackle this issue, electrospun nanofibers, inherently possessing a high surface-to-volume ratio and high porosity, are promising candidates for the design of anti-inflammatory drug delivery systems. In this study, we evaluated the ability of poly(ethylene--vinyl alcohol) nanofibers of various chemical compositions to release ibuprofen for the potential treatment of chronic wounds.

Structure-Property Relationship Based on the Amino Acid Composition of Recombinant Spider Silk Proteins for Potential Biomedical Applications.

Improving biomaterials by engineering application-specific and adjustable properties is of increasing interest. Most of the commonly available materials fulfill the mechanical and physical requirements of relevant biomedical applications, but they lack biological functionality, including biocompatibility and prevention of microbial infestation. Thus, research has focused on customizable, application-specific, and modifiable surface coatings to cope with the limitations of existing biomaterials.

The response of soft tissue cells to Ti implants is modulated by blood-implant interactions.

Titanium-based dental implants have been highly optimized to enhance osseointegration, but little attention has been given to the soft tissue-implant interface, despite being a major contributor to long term implant stability. This is strongly linked to a lack of model systems that enable the reliable evaluation of soft tissue-implant interactions. Current platforms to assess these interactions are very simplistic, thus suffering from limited biological relevance and sensitivity to varying implant surface properties.

Photo-activated titanium surface confers time dependent bactericidal activity towards Gram positive and negative bacteria.

Titanium (Ti)-based implants are broadly applied in the medical field, but their related infections can lead to implant failure. Photo-irradiation of metal materials to generate antimicrobial agents, an alternative to antibiotics, is a promising method to reduce bacterial infection and antibiotic usage. It is therefore important to understand how bacterial pathogens respond to Ti surfaces.

One-Step Synthesis of Versatile Antimicrobial Nano-Architected Implant Coatings for Hard and Soft Tissue Healing.

Dental implant failure remains a prevalent problem around the globe. The integration of implants at the interface of soft and hard tissues is complex and susceptible to instability and infections. Modifications to the surface of titanium implants have been developed to improve the performance, yet insufficient integration and biofilm formation remain major problems.

Nano-3D-Printed Photochromic Micro-Objects.

Molecular photoswitches that can reversibly change color upon irradiation are promising materials for applications in molecular actuation and photoresponsive materials. However, the fabrication of photochromic devices is limited to conventional approaches such as mold casting and spin-coating, which cannot fabricate complex structures. Reported here is the first photoresist for direct laser writing of photochromic 3D micro-objects via two-photon polymerization.

In vitro skin culture media influence the viability and inflammatory response of primary macrophages.

The replacement of animal models for investigation of inflammation and wound healing has been advancing by means of in vitro skin equivalents with increasing levels of complexity. However, the current in vitro skin models still have a limited pre-clinical relevance due to their lack of immune cells. So far, few steps have been made towards the incorporation of immune cells into in vitro skin and the requirements for immunocompetent co-cultures remain unexplored.

Influence of ceftriaxone on human bone cell viability and in vitro mineralization potential is concentration- and time-dependent.

Aims: In orthopaedic and trauma surgery, implant-associated infections are increasingly treated with local application of antibiotics, which allows a high local drug concentration to be reached without eliciting systematic adverse effects. While ceftriaxone is a widely used antibiotic agent that has been shown to be effective against musculoskeletal infections, high local concentrations may harm the surrounding tissue. This study investigates the acute and subacute cytotoxicity of increasing ceftriaxone concentrations as well as their influence on the osteogenic differentiation of human bone progenitor cells.

Tissue Inhibitor of Metalloproteinase (TIMP) Peptidomimetic as an Adjunctive Therapy for Infectious Keratitis.

Matrix metalloproteinase 9 (MMP-9) has a key role in many biological processes, and while it is crucial for a normal immune response, excessive release of this enzyme can lead to severe tissue damage, as evidenced by proteolytic digestion and perforation of the cornea during infectious keratitis. Current medical management strategies for keratitis mostly focus on antibacterial effects, but largely neglect the role of excess MMP activity. Here, a cyclic tissue inhibitor of metalloproteinase (TIMP) peptidomimetic, which downregulated MMP-9 expression both at the mRNA and protein levels as well as MMP-9 activity in THP-1-derived macrophages, is reported.

Responsive Nanofibers with Embedded Hierarchical Lipid Self-Assemblies.

We introduce the design and study of a hybrid electrospun membrane with a dedicated nanoscale structural hierarchy for controlled functions in the biomedical domain. The hybrid system comprises submicrometer-sized internally self-assembled lipid nanoparticles (ISAsomes or mesosomes) embedded into the electrospun membrane with a nanofibrous polymer network. The internal structure of ISAsomes, studied by small-angle X-ray scattering (SAXS) and electron microscopy, demonstrated a spontaneous response to variations in the environmental conditions as they undergo a bicontinuous inverse cubic phase (cubosomes) in solution to a crystalline lamellar phase in the polymer membrane; nevertheless, this phase reorganization is reversible.

Multifunctional Biomaterials: Combining Material Modification Strategies for Engineering of Cell-Contacting Surfaces.

In the human body, cells in a tissue are exposed to signals derived from their specific extracellular matrix (ECM), such as architectural structure, mechanical properties, and chemical composition (proteins, growth factors). Research on biomaterials in tissue engineering and regenerative medicine aims to recreate such stimuli using engineered materials to induce a specific response of cells at the interface. Although traditional biomaterials design has been mostly limited to varying individual signals, increasing interest has arisen on combining several features in recent years to improve the mimicry of extracellular matrix properties.

In Vitro Cytocompatibility Assessment of Ti-Modified, Silicon-oxycarbide-Based, Polymer-Derived, Ceramic-Implantable Electrodes under Pacing Conditions.

Polymer-derived ceramics (PDC) have recently gained increased interest in the field of bioceramics. Among PDC's, carbon-rich silicon oxycarbide ceramics (SiOC) possess good combined electrical and mechanical properties. Their durability in aggressive environments and proposed cytocompatibility makes them an attractive material for fabrication of bio-MEMS devices such as pacemaker electrodes.

Silk fibroin/sericin 3D sponges: The effect of sericin on structural and biological properties of fibroin.

Among naturally occurring polymers, silk fibroin and sericin have attracted much attention in the field of tissue engineering; however, clinical application of silk fibroin/sericin scaffolds in a combined form has been questioned due to the possible pro-inflammatory reaction against native silk and fibroin/sericin 3D constructs. The objective of this study was to fabricate 3D spongy fibroin/sericin scaffolds and to explore the structural, biological and immunological properties of different ratios of fibroin and sericin. Structural characterization revealed a highly porous structure (>91%) with a large surface area and water uptake capacity for all different fibroin/sericin scaffolds.

Mussel-Inspired Injectable Hydrogel Adhesive Formed under Mild Conditions Features Near-Native Tissue Properties.

Injectable hydrogel adhesives, especially those that can strongly adhere to tissues and feature near-native tissue mechanical properties, are desirable biomaterials for tissue repair. Compared to nonadhesive injectable hydrogels for minimally invasive delivery of therapeutic agents, they can better retain the delivered agents at targeted tissue locations and provide additional local physical barriers. However, regardless of recent advances, an ideal injectable hydrogel adhesive with both proper adhesion and mechanical matching between hydrogels and tissues is yet to be demonstrated with cytocompatible and efficient in situ curing methods.

Correction: Silk based scaffolds with immunomodulatory capacity: anti-inflammatory effects of nicotinic acid.

Correction for 'Silk based scaffolds with immunomodulatory capacity: anti-inflammatory effects of nicotinic acid' by Abdollah Zakeri Siavashani et al., Biomater. Sci.

Silk based scaffolds with immunomodulatory capacity: anti-inflammatory effects of nicotinic acid.

Implantation of temporary and permanent biomaterials in the body leads to a foreign body reaction (FBR), which may adversely affect tissue repair processes and functional integration of the biomaterial. However, modulation of the inflammatory response towards biomaterials can potentially enable a favorable healing response associated with functional tissue formation and tissue regeneration. In this work, incorporation of nicotinic acid in 3D silk scaffolds is explored as an immunomodulatory strategy for implantable biomaterials.

In Vitro Endothelialization of Surface-Integrated Nanofiber Networks for Stretchable Blood Interfaces.

Despite major technological advances within the field of cardiovascular engineering, the risk of thromboembolic events on artificial surfaces in contact with blood remains a major challenge and limits the functionality of ventricular assist devices (VADs) during mid- or long-term therapy. Here, a biomimetic blood-material interface is created via a nanofiber-based approach that promotes the endothelialization capability of elastic silicone surfaces for next-generation VADs under elevated hemodynamic loads. A blend fiber membrane made of elastic polyurethane and low-thrombogenic poly(vinylidene fluoride- co-hexafluoropropylene) was partially embedded into the surface of silicone films.

Design of a Versatile Sample Holder for Facile Culture of Cells on Electrospun Membranes or Thin Polymer Films Under Flow Conditions.

Endothelial cell culture under flow, to mimic physiological conditions within blood vessels, has gained particular attention for the formation of a homogeneous endothelium in vitro. Here, we report on the design of a setup for simultaneous culture of up to nine electrospun membranes or thin polymer films in custom-made holders under flow on an orbital shaker. The versatile design of the device allows for the use of electrospun membranes/polymer films of choice and subsequent analysis with commonly used methods such as immunofluorescence or scanning electron microscopy.

Surface modification of ultrafine-grained titanium: Influence on mechanical properties, cytocompatibility, and osseointegration potential.

Objective: The main objective of this study was to demonstrate that dental implants made from ultrafine-grain titanium (UFG-Ti) can be created that replicate state of the art surfaces of standard coarse-grain titanium (Ti), showing excellent cytocompatibility and osseointegration potential while also providing improved mechanical properties.

Material And Methods: UFG-Ti was prepared by continuous equal channel angular processing (ECAP), and surfaces were treated by sandblasting and acid etching. Mechanical properties (tensile and fatigue strength), wettability, and roughness parameters were evaluated.

Assessing the osteogenic potential of zirconia and titanium surfaces with an advanced in vitro model.

Objectives: In recent years, zirconia dental implants have gained increased attention especially for patients with thin gingival biotypes or patients seeking metal-free restoration. While physical and chemical material surface properties govern the blood-material interaction and subsequent osseointegration processes, the organizational principles underlying the interplay of biochemical and biophysical cues are still not well understood. Therefore, this study investigated how the interaction of a microstructured zirconia surface with blood influences its osseointegration potential compared to microstructured titanium with or without additional nanostructures.

Controlling the surface structure of electrospun fibers: Effect on endothelial cells and blood coagulation.

The influence of nano- or micron-sized structures on polymer films as well as the impact of fiber diameter of electrospun membranes on endothelial cell (EC) and blood response has been studied for vascular tissue engineering applications. However, the influence of surface structures on micron-sized fibers on endothelial cells and blood interaction is currently not known. In this work, electrospun membranes with distinct fiber surface structures were designed to study their influence on the endothelial cell viability and thrombogenicity.

Cell-Membrane-Inspired Silicone Interfaces that Mitigate Proinflammatory Macrophage Activation and Bacterial Adhesion.

Biofouling on silicone implants causes serious complications such as fibrotic encapsulation, bacterial infection, and implant failure. Here we report the development of antifouling, antibacterial silicones through covalent grafting with a cell-membrane-inspired zwitterionic gel layer composed of 2-methacryolyl phosphorylcholine (MPC). To investigate how substrate properties influence cell adhesion, we cultured human-blood-derived macrophages and Escherichia coli on poly(dimethylsiloxane) (PDMS) and MPC gel surfaces with a range of 0.