Bio-conversion of organic wastes towards polyhydroxyalkanoates.

The bio-manufacturing of products with substantial commercial value, particularly polyhydroxyalkanoates (PHA), using cost-effective carbon sources through microorganisms, has garnered heightened attention from both the scientific community and industry over the past few decades. Opting for industrial PHA production from various organic wastes, spanning industrial, agricultural, municipal, and food-based sources, emerges as a wiser choice. This strategy not only eases the burden of recycling organic waste and curbs environmental pollution but also trims down PHA production costs, rendering these materials more competitive in commercial markets.

Pilot-scale production of mcl-PHA by Pseudomonas citronellolis using acetic acid as the sole carbon source.

Medium-chain-length polyhydroxyalkanoates (mcl-PHA) are biobased materials with promising properties for environmentally friendly applications. Due to high production costs, which are related to the cost of the carbon sources combined with conversion insufficiencies, currently only small quantities are produced. This results in a lack of reliable data on properties and application potential for the variety of polymers from different types of production strains.

Comparative assessment of environmental impacts of 1st generation (corn feedstock) and 3rd generation (carbon dioxide feedstock) PHA production pathways using life cycle assessment.

Polyhydroxyalkanoates (PHA) are bio-based and biodegradable alternatives to conventional plastic types and have the potential to reduce the environmental impacts along the life cycle. In comparison to already established production routes for PHA (heterotrophic production) based on renewable feedstock like glucose (first generation feedstock), novel production routes, such as the photoautotrophic production of PHA based on CO as feedstock (third generation feedstock) could offer new perspectives with regard to the reduction in the environmental impacts. To quantify the environmental impacts of PHA produced via photoautotrophic and heterotrophic production pathways, life cycle assessment (LCA) methodology based on ISO 14040/44 was applied, thus conducting a first of its kind comparative study for PHA based on third generation feedstock.

Advances and trends in microbial production of polyhydroxyalkanoates and their building blocks.

With the rapid development of synthetic biology, a variety of biopolymers can be obtained by recombinant microorganisms. Polyhydroxyalkanoates (PHA) is one of the most popular one with promising material properties, such as biodegradability and biocompatibility against the petrol-based plastics. This study reviews the recent studies focusing on the microbial synthesis of PHA, including chassis engineering, pathways engineering for various substrates utilization and PHA monomer synthesis, and PHA synthase modification.

Cell Retention as a Viable Strategy for PHA Production from Diluted VFAs with .

The production of biodegradable and biocompatible materials such as polyhydroxyalkanoates (PHAs) from waste-derived volatile fatty acids (VFAs) is a promising approach towards implementing a circular bioeconomy. However, VFA solutions obtained via acidification of organic wastes are usually too diluted for direct use in standard batch or fed-batch processes. To overcome these constraints, this study introduces a cell recycle fed-batch system using uyuni S29 for poly(3-hydroxybutyrate) (P3HB) production from acetic acid.

The influence of different carbon sources on growth and single cell oil production in oleaginous yeasts Apiotrichum brassicae and Pichia kudriavzevii.

Oleaginous yeasts offer an interesting possibility for renewable lipid production, since the single cell oil accumulated can be based on a wide range of cheap, waste-derived carbon sources. Here, several short chain carboxylic acids and sugars commonly found in these substrates were assessed as carbon sources for Apiotrichum brassicae and Pichia kudriavzevii. While both strains were able to utilize all carbon sources employed, high volumetric lipid productivities (0.

Waste-derived volatile fatty acids as carbon source for added-value fermentation approaches.

The establishment of a sustainable circular bioeconomy requires the effective material recycling from biomass and biowaste beyond composting/fertilizer or anaerobic digestion/bioenergy. Recently, volatile fatty acids attracted much attention due to their potential application as carbon source for the microbial production of high added-value products. Their low-cost production from different types of wastes through dark fermentation is a key aspect, which will potentially lead to the sustainable production of fuels, materials or chemicals, while diminishing the waste volume.

Effects of nutrient and oxygen limitation, salinity and type of salt on the accumulation of poly(3-hydroxybutyrate) in Bacillus megaterium uyuni S29 with sucrose as a carbon source.

Due to high manufacturing costs, industrial production and application of bio-based polyhydroxyalkanoates (PHA) as bioplastics remain below the expected potential. Improving yields and productivities during biotechnological production will contribute to eliminating existing shortcomings and should therefore be a priority in process development with new strains and substrates. The present study investigates key parameters such as different nutrient and oxygen limitation strategies and the salinity and type of salt to determine their impact on growth and poly(3-hydroxybutyrate) (P(3HB)) formation behaviour of Bacillus megaterium.

High cell-density production of poly(3-hydroxybutyrate) in a membrane bioreactor.

Agro-industrial residues with a low carbon content, such as whey, stillage or wastewater from plant oil mills are abundant and cheap. However, they cannot be used directly in highly productive industrial poly(3-hydroxybutyrate) (P3HB) production, as the classical fed-batch fermentation strategy requires highly concentrated feed streams. This problem has been circumvented in this report by retaining the cells during the fermentation in the bioreactor using an external microfiltration module.

Direct fermentation of potato starch and potato residues to lactic acid by under non-sterile conditions.

Background: Lactic acid is an important biorefinery platform chemical. The use of thermophilic amylolytic microorganisms to produce lactic acid by fermentation constitutes an efficient strategy to reduce operating costs, including raw materials and sterilization costs.

Results: A process for the thermophilic production of lactic acid by directly from potato starch was characterized and optimized.

Wheat bran biorefinery--an insight into the process chain for the production of lactic acid.

The present study investigates a wheat bran biorefinery including major processing steps pre-extraction, pre-treatment and lactic acid fermentation. Concerning the dry mass distribution, during the pre-extraction 32% of the feedstock was recovered, offering some perspectives for applications in food area. The pre-treatment (hydrothermal/enzymatic hydrolysis) of the remaining cake solubilized 34% of dry mass and led to a fermentable sugar concentration of 21g/L.

Effect of wood ash treatment on improving the fermentability of wood hydrolysate.

Softwood hydrolysates were overlimed with wood ash to improve the fermentability of hydrolysates. It could be demonstrated in fermentation tests that wood ash treatment increases fermentability compared to the hydrolysates untreated and treated with alkaline compounds such as Ca(OH)(2), NaOH, and KOH, which are commonly used for overliming. The enhanced fermentability of the hydrolysate treated with wood ash is due to the reduction of the inhibitors of the fermentation such as furan and phenolic compounds and to nutrient effects of some inorganic components from the wood ash on the fermentation.

Thermophilic fermentation of hydrolysates: the effect of inhibitors on growth of thermophilic bacteria.

Lignocellulosic biomass has great potential as a cheap feedstock in biological processes to produce biofuels or chemicals; however, dilute acid pretreatment at high temperatures produces undesirable compounds. Toxicity tests were done with inhibitors in standard media, to predict the growth-limiting effects on thermophilic strains. The 22 inhibitors included furfural, levulinic acid, acetic acid, and cinnamaldehyde.

Dilute-acid hydrolysis of sugarcane bagasse at varying conditions.

Sugarcane bagasse, a byproduct of the cane sugar industry, is an abundant source of hemicellulose that could be hydrolyzed to yield a fermentation feedstock for the production of fuel ethanol and chemicals. The effects of sulfuric acid concentration, temperature, time, and dry matter concentration on hemicellulose hydrolysis were studied with a 20-L batch hydrolysis reactor using a statistical experimental design. Even at less severe conditions considerable amounts (>29%) of the hemicellulose fraction could be extracted.