Coefficient of Friction and Height Loss: Two Criteria Used to Determine the Mechanical Property and Stability of Regenerated Versus Natural Articular Cartilage.

Background: The coefficient of friction (CoF) serves as an indicator for the mechanical properties of natural and regenerated articular cartilage (AC). After tribological exposure, a height loss (HL) of the cartilage pair specimens can be measured. Our aim was to determine the CoF and HL of regenerated AC tissue and compare them with those of natural AC from non-operated joints and AC from joints where the regenerated tissues had been created after different treatments.

Resilience to height loss of articular cartilage of osteoarthritic stifle joints of old pigs, compared with healthy cartilage from young pigs in a tribological pin-on-plate exposure, revealing similar friction forces.

Introduction: We saw a lack of data on the biomechanical behavior of degenerated articular cartilage (OA) compared with that of healthy cartilage, even though the susceptibility to wear and tear of articular cartilage plays a key role in the progression of osteoarthritis (OA). Therefore, we performed a comparison between naturally occurring OA and healthy cartilage from pigs, before and after tribological stress.

Aim: The aim of the study was to compare OA-cartilage with healthy cartilage and to analyze the resilience to tribological shear stress, which will be measured as height loss (HL), and to friction forces of the cartilage layers.

Compression Bioreactor-Based Mechanical Loading Induces Mobilization of Human Bone Marrow-Derived Mesenchymal Stromal Cells into Collagen Scaffolds In Vitro.

Articular cartilage (AC) is an avascular tissue composed of scattered chondrocytes embedded in a dense extracellular matrix, in which nourishment takes place via the synovial fluid at the surface. AC has a limited intrinsic healing capacity, and thus mainly surgical techniques have been used to relieve pain and improve function. Approaches to promote regeneration remain challenging.

Bioreactor for mobilization of mesenchymal stem/stromal cells into scaffolds under mechanical stimulation: Preliminary results.

Introduction: Articular cartilage (AC) is a viscoelastic tissue with a limited regenerative capability because of the lack of vasculature. Mechanical stimulation contributes to the homeostasis of functional AC since it promotes the delivery of nutrients, cytokines and growth factors between the distant chondrocytes. We hypothesized that biomechanical stimulation might enhance mobilization of endogenous mesenchymal stem/stromal cells (MSCs) from neighboring niches as the bone marrow.

Report on a large animal study with Göttingen Minipigs where regenerates and controls for articular cartilage were created in a large number. Focus on the conditions of the operated stifle joints and suggestions for standardized procedures.

The characterization of regenerated articular cartilage (AC) can be based on various methods, as there is an unambiguous accepted criterion neither for the natural cartilage tissue nor for regenerates. Biomechanical aspects should be considered as well, leading to the need for more equivalent samples. The aim of the study was to describe a large animal model where 8 specimens of regenerated AC can be created in one animal plus the impact of two surgeries on the welfare of the animals.

Osteoarthritis in the Knee Joints of Göttingen Minipigs after Resection of the Anterior Cruciate Ligament? Missing Correlation of MRI, Gene and Protein Expression with Histological Scoring.

Introduction: The Göttingen Minipig (GM) is used as large animal model in articular cartilage research. The aim of the study was to introduce osteoarthritis (OA) in the GM by resecting the anterior cruciate ligament (ACLR) according to Pond and Nuki, verified by histological and magnetic resonance imaging (MRI) scoring as well as analysis of gene and protein expression.

Materials And Methods: The eight included skeletally mature female GM were assessed after ACLR in the left and a sham operation in the right knee, which served as control.

Analysis of the osseointegrative force of a hyperhydrophilic and nanostructured surface refinement for TPS surfaces in a gap healing model with the Göttingen minipig.

Background: A lot of advantages can result in a high wettability as well as a nanostructure at a titanium surface on bone implants. Thus, the aim of this study was to evaluate the osseointegrative potential of a titan plasma-sprayed (TPS) surface refinement by acid-etching with chromosulfuric acid. This results in a hyperhydrophilic surface with a nanostructure and an extreme high wetting rate.

Analysis of Gene Expression and Ultrastructure of Stifle Menisci from Juvenile and Adult Pigs.

The origin of the age-associated degenerative processes in meniscal tissue is poorly understood and may be related to an imbalance of anabolic and catabolic metabolism. The aim of the current study was to compare medial menisci isolated from juvenile pigs and degenerated medial menisci from adult pigs in terms of gene expression profile and ultrastructure. Medial menisci were isolated from the knee joints of juvenile and adult pigs (n = 8 for each group).

Instruments for reproducible setting of defects in cartilage and harvesting of osteochondral plugs for standardisation of preclinical tests for articular cartilage regeneration.

Background: Standardisation is required in research, so are approval procedures for advanced therapy medical products and other procedures for articular cartilage therapies. The process of creating samples needs to be reproducible. The aim of this study was to design, create and validate instruments (1) to create reproducible and accurate defects and (2) to isolate samples in the shape of osteochondral cylinders in a quick, reliable and sterile manner.

Development of a low-cost polymethylmethacrylate stand-alone cervical cage: technical note.

Background And Study Aims: Stand-alone cervical cages aim to provide primary stability, yield solid fusion in the long-term course, and maintain physiologic alignment. However, many implants designed for these purposes fail in achieving these goals. Following implantation, relatively high rates of cage subsidence and failure of disc height maintenance may lead to cervical kyphosis and poor alignment of the cervical spine.

An MR-compatible device for automated and safe application of laser stimuli in experiments employing nociceptive stimulation.

In this paper the establishment of an automatic laser application device that reproducibly delivers laser stimuli in a safe, controlled, and reliable manner is presented. Nociceptive stimulation is widely used in functional magnetic resonance imaging (fMRI) experiments and a number of different methods are employed. One major advantage of laser stimulation as a method to administer painful stimuli is that it selectively activates nociceptors.

Effect of surface roughness, porosity, and a resorbable calcium phosphate coating on osseointegration of titanium in a minipig model.

The aim of this study was to compare the osseointegration of four different implant surfaces in the Göttingen minipig femur model. They were prepared by glasspearlblasting (A), sandblasting (B) and titaniumplasma spraying (C and D). Surface D received additionally an electrochemically deposited layer of a resorbable calcium phosphate (CaP) layer, made mainly of brushite.

Titin expression in human articular cartilage and cultured chondrocytes: a novel component in articular cartilage biomechanical sensing?

In striated muscle tissues, the giant protein titin acts as a biomechanically active filament system, coupling stress/strain to gene expression. The objective of the study is to show the existence of titin fragments in human articular cartilage, as in diarthodial joints, chondrocytes are also known to sense and respond to stretching. We have surveyed human cultured cartilage collected from adults with osteoarthritis (OA), without OA and from infants with a set of titin antibodies and primer pairs.

[The relation of workspace and installation space of epicyclic kinematics with six degrees of freedom].

Introduction: The kinematics of a robotic device significantly determines its installation space when it comes to technical realisation. With regard to the deployment of robotic manipulators in surgery, manipulators with a preferably small installation space are needed.

Materials And Methods: This study describes six versions of novel epicyclic kinematics with six degrees of freedom (DOF).

Accuracy of Ein Bild Röntgen Analyse in determining wear in total hip arthroplasty in vitro.

The Ein Bild Röntgen Analyse system is used to radiographically measure femoral head penetration in total hip replacement components. Because determining the accuracy of any wear analysis system is more precise and comparable under in vitro conditions, we used a femoral head migration simulator to assess the accuracy of Ein Bild Röntgen Analyse and determine the effect of magnification factors on accuracy. We used onscreen magnifications of 100% and 200% to measure anteroposterior radiographs, which improved the accuracy of determining femoral head penetration.

Today's state of the art in surgical robotics*.

Objective: This paper describes the current level of development of robots for surgery.

Material And Methods: This paper is based on a literature search in Pubmed, IEEExplore, CiteSeer and the abstract volumes of the MICCAI 2002, 2003 and 2004, CARS 2003 and 2004, CAOS 2003 and 2004, CURAC 2003 and 2004 and MRNV 2004 meetings.

Results: Divided into different disciplines (imaging, abdominal and thoracic surgery, ENT, OMS, neurosurgery, orthopaedic surgery, radiosurgery, trauma surgery, urology), 159 robot systems are introduced.

Validation of a diffusion chamber as in vitro system for the analysis of compound diffusibility through cartilage tissue.

The validation of a diffusion chamber comprising a donor and a receptor side separated by a cartilage membrane was undertaken according to the basic principles described by Peng et al. (1998). The study had three targets: first to evaluate the chamber as in vitro system by the examination of the diffusibility of compound through bovine cartilage samples; second the analysis of the affinity of compound (RS-130830) to cartilage; third to test the influence of two pre-incubation periods (one or three nights) of the cartilage samples.