Evaluating online data of water quality changes in a pilot drinking water distribution system with multivariate data exploration methods.

The distribution of drinking water generates soft deposits and biofilms in the pipelines of distribution systems. Disturbances in water distribution can detach these deposits and biofilms and thus deteriorate the water quality. We studied the effects of simulated pressure shocks on the water quality with online analysers.

Survival of Mycobacterium avium in drinking water biofilms as affected by water flow velocity, availability of phosphorus, and temperature.

Mycobacterium avium is a potential pathogen occurring in drinking water systems. It is a slowly growing bacterium producing a thick cell wall containing mycolic acids, and it is known to resist chlorine better than many other microbes. Several studies have shown that pathogenic bacteria survive better in biofilms than in water.

Survival of Mycobacterium avium, Legionella pneumophila, Escherichia coli, and caliciviruses in drinking water-associated biofilms grown under high-shear turbulent flow.

Most of the bacteria in drinking water distribution systems are associated with biofilms. In biofilms, their nutrient supply is better than in water, and biofilms can provide shelter against disinfection. We used a Propella biofilm reactor for studying the survival of Mycobacterium avium, Legionella pneumophila, Escherichia coli, and canine calicivirus (CaCV) (as a surrogate for human norovirus) in drinking water biofilms grown under high-shear turbulent-flow conditions.

Estimates of microbial quality and concentration of copper in distributed drinking water are highly dependent on sampling strategy.

The numbers of bacteria generally increase in distributed water. Often household pipelines or water fittings (e.g.

The effects of changing water flow velocity on the formation of biofilms and water quality in pilot distribution system consisting of copper or polyethylene pipes.

We studied the effects of flow velocity on the formation of biofilms and the concentration of bacteria in water in copper and plastic (polyethylene, PE) pipes. The formation of biofilms increased with the flow velocity of water. The increase in microbial numbers and contents of ATP was clearer in the PE pipes than in the copper pipes.

Fluorescence in situ hybridization using peptide nucleic acid probes for rapid detection of Mycobacterium avium subsp. avium and Mycobacterium avium subsp. paratuberculosis in potable-water biofilms.

Here, we present for the first time a high-affinity peptide nucleic acid (PNA) oligonucleotide sequence for detecting Mycobacterium avium bacteria, including the opportunistically pathogenic subspecies M. avium subsp. avium, M.

Advantages of peptide nucleic acid oligonucleotides for sensitive site directed 16S rRNA fluorescence in situ hybridization (FISH) detection of Campylobacter jejuni, Campylobacter coli and Campylobacter lari.

Traditionally fluorescence in situ hybridization (FISH) has been performed with labeled DNA oligonucleotide probes. Here we present for the first time a high affinity peptide nucleic acid (PNA) oligonucleotide sequence for detecting thermotolerant Campylobacter spp. using FISH.

Pipeline materials modify the effectiveness of disinfectants in drinking water distribution systems.

We studied how pipe material can modify the effectiveness of UV- and chlorine disinfection in drinking water and biofilms. This study was done with two pipe materials: copper and composite plastic (polyethylene, PE) in a pilot scale water distribution network. UV-disinfection decreased viable bacterial numbers in the pilot waterworks and outlet water of pipes on average by 79%, but in biofilms its disinfecting effect was minor.

Formation of biofilms in drinking water distribution networks, a case study in two cities in Finland and Latvia.

The formation of biofilms in drinking water distribution networks is a significant technical, aesthetic and hygienic problem. In this study, the effects of assimilable organic carbon, microbially available phosphorus (MAP), residual chlorine, temperature and corrosion products on the formation of biofilms were studied in two full-scale water supply systems in Finland and Latvia. Biofilm collectors consisting of polyvinyl chloride pipes were installed in several waterworks and distribution networks, which were supplied with chemically precipitated surface waters and groundwater from different sources.

Microbiology, chemistry and biofilm development in a pilot drinking water distribution system with copper and plastic pipes.

We studied the changes in water quality and formation of biofilms occurring in a pilot-scale water distribution system with two generally used pipe materials: copper and plastic (polyethylene, PE). The formation of biofilms with time was analysed as the number of total bacteria, heterotrophic plate counts and the concentration of ATP in biofilms. At the end of the experiment (after 308 days), microbial community structure, viable biomass and gram-negative bacterial biomass were analysed via lipid biomarkers (phospholipid fatty acids and lipopolysaccharide 3-hydroxy fatty acids), and the numbers of virus-like particles and total bacteria were enumerated by SYBR Green I staining.

Rapid enumeration of virus-like particles in drinking water samples using SYBR green I-staining.

We studied the suitability of SYBR green I-staining for determining total counts of virus-like particles and bacteria in drinking water. Low background fluorescence and lack of unspecific staining made drinking water samples an excellent matrix for SYBR green I-staining. Direct microscopic count method is a rapid and economical tool for assessing the total number of virus-like particles in aquatic samples, compared to culture-dependent or molecular biology methods.

Mycobacteria in water and loose deposits of drinking water distribution systems in Finland.

Drinking water distribution systems were analyzed for viable counts of mycobacteria by sampling water from waterworks and in different parts of the systems. In addition, loose deposits collected during mechanical cleaning of the main pipelines were similarly analyzed. The study covered 16 systems at eight localities in Finland.

Removal of soft deposits from the distribution system improves the drinking water quality.

Deterioration in drinking water quality in distribution networks represents a problem in drinking water distribution. These can be an increase in microbial numbers, an elevated concentration of iron or increased turbidity, all of which affect taste, odor and color in the drinking water. We studied if pipe cleaning would improve the drinking water quality in pipelines.

Impact of UV disinfection on microbially available phosphorus, organic carbon, and microbial growth in drinking water.

UV irradiation at a wavelength of 253.7 nm (UV(254)) is commonly used for drinking water disinfection. UV radiation is known to convert organically combined phosphorus to orthophosphate and to degrade natural organic matter.

Changes in content of microbially available phosphorus, assimilable organic carbon and microbial growth potential during drinking water treatment processes.

There are regions where microbial growth in drinking water is limited by phosphorus instead of organic carbon. In phosphorus limited waters small changes in phosphorus concentration significantly affect microbial growth. We studied how water treatment processes in waterworks affect the availability of microbial nutrients and microbial growth potential in drinking water.

Biofilm formation in drinking water affected by low concentrations of phosphorus.

Abstract: There are geographical regions where microbial growth in drinking waters is limited by phosphorus instead of organic carbon. In these drinking waters even a low amount of phosphorus can strongly enhance microbial growth. The formation of biofilm can be limited by low availability of phosphorus in drinking waters with low content of phosphorus.

The microbial community structure of drinking water biofilms can be affected by phosphorus availability.

Microbial communities in biofilms grown for 4 and 11 weeks under the flow of drinking water supplemented with 0, 1, 2, and 5 microg of phosphorus liter(-1) and in drinking and warm waters were compared by using phospholipid fatty acids (PLFAs) and lipopolysaccharide 3-hydroxy fatty acids (LPS 3-OH-FAs). Phosphate increased the proportion of PLFAs 16:1 omega 7c and 18:1 omega 7c and affected LPS 3-OH-FAs after 11 weeks of growth, indicating an increase in gram-negative bacteria and changes in their community structure. Differences in community structures between biofilms and drinking and warm waters can be assumed from PLFAs and LPS 3-OH-FAs, concomitantly with adaptive changes in fatty acid chain length, cyclization, and unsaturation.