Liquid metals for boosting stability of zeolite catalysts in the conversion of methanol to hydrocarbons.

Methanol-to-hydrocarbons (MTH) process has been considered one of the most practical approaches for producing value-added products from methanol. However, the commonly used zeolite catalysts suffer from rapid deactivation due to coke deposition and require regular regeneration treatments. We demonstrate that low-melting-point metals, such as Ga, can effectively promote more stable methanol conversion in the MTH process by slowing coke deposition and facilitating the desorption of carbonaceous species from the zeolite.

Molecular Views on Fischer-Tropsch Synthesis.

For nearly a century, the Fischer-Tropsch (FT) reaction has been subject of intense debate. Various molecular views on the active sites and on the reaction mechanism have been presented for both Co- and Fe-based FT reactions. In the last 15 years, the emergence of a surface-science- and molecular-modeling-based bottom-up approach has brought this molecular picture a step closer.

The Chemical Route to a Carbon Dioxide Neutral World.

Excessive CO emissions in the atmosphere from anthropogenic activity can be divided into point sources and diffuse sources. The capture of CO from flue gases of large industrial installations and its conversion into fuels and chemicals with fast catalytic processes seems technically possible. Some emerging technologies are already being demonstrated on an industrial scale.

Single-Molecule Rotational Switch on a Dangling Bond Dimer Bearing.

One of the key challenges in the construction of atomic-scale circuits and molecular machines is to design molecular rotors and switches by controlling the linear or rotational movement of a molecule while preserving its intrinsic electronic properties. Here, we demonstrate both the continuous rotational switching and the controlled step-by-step single switching of a trinaphthylene molecule adsorbed on a dangling bond dimer created on a hydrogen-passivated Ge(001):H surface. The molecular switch is on-surface assembled when the covalent bonds between the molecule and the dangling bond dimer are controllably broken, and the molecule is attached to the dimer by long-range van der Waals interactions.

Diels-Alder attachment of a planar organic molecule to a dangling bond dimer on a hydrogenated semiconductor surface.

Construction of single-molecule electronic devices requires the controlled manipulation of organic molecules and their properties. This could be achieved by tuning the interaction between the molecule and individual atoms by local "on-surface" chemistry, i.e.

Shape and Size of Cobalt Nanoislands Formed Spontaneously on Cobalt Terraces during Fischer-Tropsch Synthesis.

Cobalt-based catalysts undergo a massive and spontaneous reconstruction to form uniform triangular nanoislands under Fischer-Tropsch (FT) conditions. This reconstruction is driven by the unusual and synergistic adsorption of square-planar carbon and CO at the 4-fold edge sites of the nanoislands, driving the formation of triangular islands. The size of the nanoislands is determined by the balance between energy gain from creating C/CO-covered edges and energy penalty to create C/CO-covered corners.

Flexible MgO Barrier Magnetic Tunnel Junctions.

Flexible MgO barrier magnetic tunnel junction (MTJ) devices are fabricated using a transfer printing process. The flexible MTJ devices yield significantly enhanced tunneling magnetoresistance of ≈300% and improved abruptness of switching, as residual strain in the MTJ structure is released during the transfer process. This approach could be useful for flexible electronic systems that require high-performance memory components.

Interaction of a conjugated polyaromatic molecule with a single dangling bond quantum dot on a hydrogenated semiconductor.

Controlling the strength of the coupling between organic molecules and single atoms provides a powerful tool for tuning electronic properties of single-molecule devices. Here, using scanning tunneling microscopy and spectroscopy (STM/STS) supported by theoretical modeling, we study the interaction of a planar organic molecule (trinaphthylene) with a hydrogen-passivated Ge(001):H substrate and a single dangling bond quantum dot on that surface. The electronic structure of the molecule adsorbed on the hydrogen-passivated surface is similar to the gas phase structure and the measurements show that HOMO and LUMO states contribute to the STM filled and empty state images, respectively.

Origin of extraordinary stability of square-planar carbon atoms in surface carbides of cobalt and nickel.

Surface carbides of cobalt and nickel are exceptionally stable, having stabilities competitive with those of graphitic C on these surfaces. The unusual structure of these carbides has attracted much attention: C assumes a tetracoordinate square-planar arrangement, in-plane with the metal surface, and its binding favors a spontaneous p4g clock surface reconstruction. A chemical bonding model for these systems is presented and explains the unusual structure, special stability, and the reconstruction.

Strain-enhanced tunneling magnetoresistance in MgO magnetic tunnel junctions.

While the effects of lattice mismatch-induced strain, mechanical strain, as well as the intrinsic strain of thin films are sometimes detrimental, resulting in mechanical deformation and failure, strain can also be usefully harnessed for applications such as data storage, transistors, solar cells, and strain gauges, among other things. Here, we demonstrate that quantum transport across magnetic tunnel junctions (MTJs) can be significantly affected by the introduction of controllable mechanical strain, achieving an enhancement factor of ~2 in the experimental tunneling magnetoresistance (TMR) ratio. We further correlate this strain-enhanced TMR with coherent spin tunneling through the MgO barrier.

Thioetherification of chloroheteroarenes: a binuclear catalyst promotes wide scope and high functional-group tolerance.

A constrained binuclear palladium catalyst system affords selective thioetherification of a wide range of functionalized arenethiols with chloroheteroaromatic partners with the highest turnover numbers (TONs) reported to date and tolerates a large variety of reactive functions. The scope of this system includes the coupling of thiophenols with six- and five-membered 2-chloroheteroarenes (i.e.

Dangling-bond logic gates on a Si(100)-(2 × 1)-H surface.

Atomic-scale Boolean logic gates (LGs) with two inputs and one output (i.e. OR, NOR, AND, NAND) were designed on a Si(100)-(2 × 1)-H surface and connected to the macroscopic scale by metallic nano-pads physisorbed on the Si(100)-(2 × 1)-H surface.

Negative tunneling magnetoresistance by canted magnetization in MgO/NiO tunnel barriers.

The influence of the insertion of an ultrathin NiO layer between the MgO barrier and the ferromagnetic electrodes in magnetic tunnel junctions has been investigated from measurements of the tunneling magnetoresistance and via x-ray magnetic circular dichroism (XMCD). The magnetoresistance shows a high asymmetry with respect to bias voltage, giving rise to a negative value of up to -16% at 2.8 K.

A Triphenylamine-Based Conjugated Polymer with Donor-π-Acceptor Architecture as Organic Sensitizer for Dye-Sensitized Solar Cells.

A conjugated polymer containing an electron donating backbone (triphenylamine) and an electron accepting side chain (cyanoacetic acid) with conjugated thiophene units as the linkers has been synthesized. Dye-sensitized solar cells (DSSCs) are fabricated utilizing this material as the dye sensitizer, resulting a typical power conversion efficiency of 3.39% under AM 1.

Ab initio reaction path analysis for the initial hydrogen abstraction from organic acids by hydroxyl radicals.

Hydrogen abstraction from organic acids by hydroxyl radicals is the initial rate- and selectivity-determining step in the photochemical oxidation of organic acids in the troposphere. To quantify the rate and selectivity of these reactions, the abstraction of hydrogen atoms at the acid, alpha, beta, gamma, and methyl positions was studied for valeric acid, C(4)H(9)COOH, using first principles calculations. At the high-pressure limit, an overall rate coefficient at 298 K of 4.

First principles study of the reaction of formic and acetic acids with hydroxyl radicals.

The oxidation of formic and acetic acids with hydroxyl radicals was studied as a model for the oxidation of larger carboxylic acids using first principles calculations. For formic acid, the CBS-QB3 activation barriers of 14.1 and 12.

Ab initio reaction path analysis of benzene hydrogenation to cyclohexane on Pt(111).

First-principles density functional theory calculations were performed to obtain detailed insight into the mechanism of benzene hydrogenation over Pt(111). The results indicate that benzene hydrogenation follows a Horiuti-Polanyi scheme which involves the consecutive addition of hydrogen adatoms. A first-principles-based reaction path analysis indicates the presence of a dominant reaction path.

Group additive values for the gas phase standard enthalpy of formation of hydrocarbons and hydrocarbon radicals.

A complete and consistent set of 95 Benson group additive values (GAV) for the standard enthalpy of formation of hydrocarbons and hydrocarbon radicals at 298 K and 1 bar is derived from an extensive and accurate database of 233 ab initio standard enthalpies of formation, calculated at the CBS-QB3 level of theory. The accuracy of the database was further improved by adding newly determined bond additive corrections (BAC) to the CBS-QB3 enthalpies. The mean absolute deviation (MAD) for a training set of 51 hydrocarbons is better than 2 kJ mol(-1).

Ab initio group contribution method for activation energies of hydrogen abstraction reactions.

The group contribution method for activation energies is applied to hydrogen abstraction reactions. To this end an ab initio database was constructed, which consisted of activation energies calculated with the ab initio CBS-QB3 method for a limited set of well-chosen homologous reactions. CBS-QB3 is shown to predict reaction rate coefficients within a factor of 2-4 and Arrhenius activation energies within 3-5 kJ mol(-1) of experimental data.