Ultrasonically targeted delivery into endothelial and smooth muscle cells in ex vivo arteries.

This study tested the hypothesis that ultrasound can target intracellular uptake of drugs into vascular endothelial cells (ECs) at low to intermediate energy and into smooth muscle cells (SMCs) at high energy. Ultrasound-enhanced delivery has been shown to enhance and target intracellular drug and gene delivery in the vasculature to treat cardiovascular disease, but quantitative studies of the delivery process are lacking. Viable ex vivo porcine carotid arteries were placed in a solution containing a model drug, TO-PRO(R)-1, and Optison microbubbles.

Biodegradable polymer microneedles: fabrication, mechanics and transdermal drug delivery.

To overcome skin's barrier properties that block transdermal delivery of most drugs, we and others have microfabricated arrays of microscopic needles, primarily out of silicon or metal. This study addresses microneedles made of biocompatible and biodegradable polymers, which are expected to improve safety and manufacturability. To make biodegradable polymer microneedles with sharp tips, we adapted microelectromechanical masking and etching to produce beveled-tip and chisel tip microneedles and developed a new fabrication method to produce tapered-cone microneedles using an in-situ lens-based lithographic approach.

Synergistic effect of ultrasound and PEI on DNA transfection in vitro.

Ultrasound and poly(ethylenimine) (PEI) have each separately been shown to increase DNA transfection efficiency. This study tested the hypothesis that the combination of ultrasound and PEI can have a synergistic effect to increase DNA transfection. This in vitro study assessed transfection efficiency of two different DNA plasmids encoding green fluorescent protein and firefly luciferase in two different cell types, a primary culture of human aortic smooth muscle cells and an immortal line of human prostate cancer cells.

Polymer particle-based micromolding to fabricate novel microstructures.

Conventional micromolding provides rapid and low-cost methods to fabricate polymer microstructures, but has limitations when producing sophisticated designs. To provide more versatile micromolding techniques, we developed methods based on filling micromolds with polymer microparticles, as opposed to polymer melts, to produce microstructures composed of multiple materials, having complex geometries, and made using mild processing conditions. Polymer microparticles of 1 to 30 microm in size were made from PLA, PGA and PLGA using established spray drying and emulsion techniques either with or without encapsulating model drug compounds.

Coated microneedles for transdermal delivery.

Coated microneedles have been shown to deliver proteins and DNA into the skin in a minimally invasive manner. However, detailed studies examining coating methods and their breadth of applicability are lacking. This study's goal was to develop a simple, versatile and controlled microneedle coating process to make uniform coatings on microneedles and establish the breadth of molecules and particles that can be coated onto microneedles.

Measurement and correlation of acoustic cavitation with cellular bioeffects.

Using broadband noise as a measure of cavitation activity, this study determined the kinetics of cavitation during sonication of Optison contrast agent and tested whether cellular bioeffects can be predicted by cavitation dose. Cell suspensions were exposed to ultrasound at varying acoustic frequency, pressure, exposure time, Optison concentration and cell type to obtain a broad range of bioeffects, i.e.

Measurement and prediction of lateral diffusion within human sclera.

Purpose: Drug delivery via the sclera is a promising approach to retinal disorder treatments that require access to the posterior segment of the eye. To complement existing studies of transverse diffusion across the sclera, this study examined lateral diffusion within the sclera parallel to the scleral surface.

Methods: Using sulforhodamine as a model hydrophilic drug, rates of diffusion were measured in strips of human cadaveric sclera for up to 1 week.

Mechanism of intracellular delivery by acoustic cavitation.

Using conditions different from conventional medical imaging or laboratory cell lysis, ultrasound has recently been shown to reversibly increase plasma membrane permeability to drugs, proteins and DNA in living cells and animals independently of cell or drug type, suggesting a ubiquitous mechanism of action. To determine the mechanism of these effects, we examined cells exposed to ultrasound by flow cytometry coupled with electron and fluorescence microscopies. The results show that cavitation generated by ultrasound facilitates cellular incorporation of macromolecules up to 28 nm in radius through repairable micron-scale disruptions in the plasma membrane with lifetimes >1 min, which is a period similar to the kinetics of membrane repair after mechanical wounding.

Polymer microneedles for controlled-release drug delivery.

Purpose: As an alternative to hypodermic injection or implantation of controlled-release systems, this study designed and evaluated biodegradable polymer microneedles that encapsulate drug for controlled release in skin and are suitable for self-administration by patients.

Methods: Arrays of microneedles were fabricated out of poly-lactide-co-glycolide using a mold-based technique to encapsulate model drugs--calcein and bovine serum albumin (BSA)--either as a single encapsulation within the needle matrix or as a double encapsulation, by first encapsulating the drug within carboxymethylcellulose or poly-L: -lactide microparticles and then encapsulating drug-loaded microparticles within needles.

Results: By measuring failure force over a range of conditions, poly-lactide-co-glycolide microneedles were shown to exhibit sufficient mechanical strength to insert into human skin.

Mechanism of fluid infusion during microneedle insertion and retraction.

Previous work has shown that infusion flow rates can be increased by an order of magnitude by partially retracting microneedles after insertion into the skin. This study sought to determine the mechanism by which retraction increases fluid infusion by piercing human cadaver skin with single microneedles, fixing the skin after retracting microneedles to different distances, and examining skin microstructure by histology. We found that microneedle insertion to 1080 microm from the skin surface resulted primarily in skin indentation and only 100-300 microm penetration into the skin.

Plasmid DNA and siRNA transfection of intestinal epithelial monolayers by electroporation.

This study was conducted to evaluate the ability of electroporation to efficiently transfect differentiated intestinal epithelial monolayers with plasmid DNA and to determine whether electroporation can transfect these monolayers with short-interfering RNA (siRNA) to cause gene silencing. Confluent T84 monolayers were transfected with reporter plasmids expressing luciferase or green-fluorescent protein or with siRNA directed against the nuclear envelope proteins lamin A/C using electroporation. Optimized electroporation conditions resulted in luciferase and GFP expression.

Precise microinjection into skin using hollow microneedles.

Hollow needles of micron dimensions have previously been fabricated and envisioned for use with transdermal patches or infusion pumps to achieve painless delivery of drugs to the skin for local and systemic effects without the need for hypodermic needles. However, little work has been carried out to identify methods to effectively use hollow microneedles for drug delivery. To address this need, we inserted hollow, glass microneedles into hairless rat skin in vivo and human cadaver skin in vitro and then imaged infusion of dye molecules, insulin, polymer microparticles, and cells into the skin by brightfield and fluorescence microscopy.

Assessment of trueness of a glucose monitor using interstitial fluid and whole blood as specimen matrix.

Background: Interstitial fluid (ISF) is a specimen of increasing interest for glucose measurements because it can be obtained in a minimally invasive manner. Our previous study showed that sufficient ISF can be obtained using microneedles to measure glucose with a conventional electrochemical glucose monitor. The aim of this study was to assess the trueness of this glucose monitor using split-sample comparison with whole blood.

Microinfusion using hollow microneedles.

Purpose: The aim of the study is to determine the effect of experimental parameters on microinfusion through hollow microneedles into skin to optimize drug delivery protocols and identify rate-limiting barriers to flow.

Methods: Glass microneedles were inserted to a depth of 720-1080 microm into human cadaver skin to microinfuse sulforhodamine solution at constant pressure. Flow rate was determined as a function of experimental parameters, such as microneedle insertion and retraction distance, infusion pressure, microneedle tip geometry, presence of hyaluronidase, and time.

Hollow metal microneedles for insulin delivery to diabetic rats.

The goal of this study was to design, fabricate, and test arrays of hollow microneedles for minimally invasive and continuous delivery of insulin in vivo. As a simple, robust fabrication method suitable for inexpensive mass production, we developed a modified-LIGA process to micromachine molds out of polyethylene terephthalate using an ultraviolet laser, coated those molds with nickel by electrodepostion onto a sputter-deposited seed layer, and released the resulting metal microneedle arrays by selectively etching the polymer mold. Mechanical testing showed that these microneedles were sufficiently strong to pierce living skin without breaking.

Biodegradable polymer microneedles: fabrication, mechanics and transdermal drug delivery.

To overcome the skin's barrier properties that block transdermal delivery of most drugs, arrays of microscopic needles have been microfabricated primarily out of silicon or metal. This study addresses microneedles made of biocompatible and biodegradable polymers, which are expected to improve safety and manufacturability. To make biodegradable polymer microneedles with sharp tips, micro-electromechanical masking and etching were adapted to produce beveled- and chisel-tip microneedles and a new fabrication method was developed to produce tapered-cone microneedles using an in situ lens-based lithographic approach.

Minimally invasive extraction of dermal interstitial fluid for glucose monitoring using microneedles.

Background: Compliance with glucose monitoring by patients with diabetes is poor because of the pain and inconvenience of conventional blood collection using lancets. To improve compliance, and thereby reduce morbidity and mortality associated with poor glucose control, this study sought to develop and test minimally invasive microneedles to extract dermal interstitial fluid (ISF) for glucose monitoring.

Methods: We used a thermal puller to fabricate individual or multi-needle arrays of glass microneedles with tip radii of 15-40 microm to penetrate 700-1,500 microm deep into the skin of anesthetized hairless rats or conscious, normal, adult, human subjects.

Increased permeability of intestinal epithelial monolayers mediated by electroporation.

This study assessed whether electroporation enhances transport across intact intestinal epithelial monolayers that mimic the intestinal epithelium. Confluent Caco-2 monolayers were exposed to electroporation pulses and then monitored over time for transepithelial transport of calcein, a small fluorescent tracer, or fluorescein-labeled bovine serum albumin, a large protein. Cumulative transport of both molecules across the monolayers increased significantly (up to 34-fold) after electroporation and depended on electroporation voltage and pulse length and on molecular size.

Model of transient drug diffusion across cornea.

A mathematical model of solute transient diffusion across the cornea to the anterior chamber of the eye was developed for topical drug delivery. Solute bioavailability was predicted given solute molecular radius and octanol-to-water distribution coefficient (Phi), ocular membrane ultrastructural parameters, tear fluid hydrodynamics, as well as solute distribution volume (Vd) and clearance rate (Cla) in the anterior chamber. The results suggest that drug bioavailability is primarily determined by solute lipophilicity.

Insertion of microneedles into skin: measurement and prediction of insertion force and needle fracture force.

As a hybrid between a hypodermic needle and transdermal patch, we have used microfabrication technology to make arrays of micron-scale needles that transport drugs and other compounds across the skin without causing pain. However, not all microneedle geometries are able to insert into skin at reasonable forces and without breaking. In this study, we experimentally measured and theoretically modeled two critical mechanical events associated with microneedles: the force required to insert microneedles into living skin and the force needles can withstand before fracturing.

Transdermal delivery of insulin using microneedles in vivo.

Purpose: The purpose of this study was to design and fabricate arrays of solid microneedles and insert them into the skin of diabetic hairless rats for transdermal delivery of insulin to lower blood glucose level.

Methods: Arrays containing 105 microneedles were laser-cut from stainless steel metal sheets and inserted into the skin of anesthetized hairless rats with streptozotocin-induced diabetes. During and after microneedle treatment, an insulin solution (100 or 500 U/ml) was placed in contact with the skin for 4 h.

Physical parameters influencing optimization of ultrasound-mediated DNA transfection.

Ultrasound (US) has been shown to transiently disrupt cell membranes and, thereby, facilitate the loading of drugs and genes into viable cells. To address optimization of gene therapy applications, the aim of this work was to systematically determine the influence of physical parameters on transfection and viability of DU145 prostate cancer cells by two different DNA plasmids (pEGFP-N1 and pGL3). By sonicating cells in vitro in the presence of naked DNA, we found that transfection efficiency was increased by: 1.

Tissue electroporation: quantification and analysis of heterogeneous transport in multicellular environments.

Although electroporation is gaining increased attention as a technology to enhance clinical chemotherapy and gene therapy of tissues, direct measurements of electroporation-mediated transport in multicellular environments are lacking. In this study, we used multicellular tumor spheroids of DU145 prostate cancer cells as a model tissue to measure the levels and distribution of molecular uptake in a multicellular environment as a function of electrical and other parameters. These measurements, and subsequent analysis, were used to test the hypothesis that cells in a multicellular environment respond to electroporation in a heterogeneous manner that differs from isolated cells in suspension due to differences in cell state, local solute concentration, and local electric field.