Formation of polysulfone colloids for adsorption of natural organic foulants.

An ever-present problem in the use of commercial membranes for treatment of drinking water is fouling of the membranes by natural organic matter (NOM). This work describes a new approach to elimination or minimization of membrane fouling by NOM. When a 2% solution of polysulfone in NMP and propionic acid is slowly injected into water, approximately 50 nm polysulfone particles are spontaneously formed, and these hydrophobic particles quickly coagulate into approximately 12-microm diameter aggregates; the formed material has a surface area of approximately 100 m(2)/g and an equivalent "pore" size of 25 nm.

An evaluation of the colloidal stability of metal working fluid.

The effect of calcium on the stability of a commercial MWF is characterized through the experimental determination of the stability ratio, W. Three experimental methods of stability ratio evaluation are investigated. (1) The initial slope of the absorbance versus time curve is used to estimate the rate of coagulation.

Fouling of microfiltration and ultrafiltration membranes by natural waters.

Membrane filtration (microfiltration and ultrafiltration) has become an accepted process for drinking water treatment, but membrane fouling remains a significant problem. The objective of this study was to systematically investigate the mechanisms and components in natural waters that contribute to fouling. Natural waters from five sources were filtered in a benchtop filtration system.