Framework for developing an exposure science curriculum as part of the European Exposure Science Strategy 2020-2030.

Background: Evaluating and managing exposures to chemical, physical and biological stressors, which frequently interplay with psychological stressors as well as social and behavioural aspects, is crucial for protecting human and environmental health and transitioning towards a sustainable future. Advances in our understanding of exposure rely on input from well-trained exposure scientists. However, no education programmes in Europe are currently explicitly dedicated to cover the broader range of exposure science approaches, applications, stressors and receptors.

Towards further harmonization of a glossary for exposure science-an ISES Europe statement.

The use of aligned exposure science terminology is crucial for ease of comparison and appropriate interpretation of exposure information, regulatory reports, and scientific publications. Sometimes the use of different terminology in different contexts and areas of exposure science results in diverging interpretations of the same descriptor. During the development of the European strategy for exposure science, the need was identified to agree on a defined terminology requiring an evaluation of the commonly used terms, synonymous uses, and their relationships between each other.

Sensitive and selective quantification of glyphosate and aminomethylphosphonic acid (AMPA) in urine of the general population by gas chromatography-tandem mass spectrometry.

Glyphosate is the highest volume herbicide used worldwide, and its main biodegradation product is aminomethylphosphonic acid (AMPA), both are listed as priority substances in the Human Biomonitoring for Europe (HBM4EU) initiative which aims at improving policy by filling knowledge gaps by targeted research. The objective of the current study was to advance the sensitivity of an existing gas chromatography-tandem mass spectrometry analytical method to measure environmental population exposures. A 50% lower limit of quantification of 0.

Concentrations of perfluoroalkyl substances in human milk from Ireland: Implications for adult and nursing infant exposure.

Concentrations of 10 perfluoroalkyl substances (PFASs) were measured in 16 pools of human milk from Ireland. Only four PFASs were detected (PFOA, PFNA, PFHxS and PFOS), with concentrations dominated by PFOA which was detected in all samples at a median of 0.10 ng/mL.

Building a European exposure science strategy.

Exposure information is a critical element in various regulatory and non-regulatory frameworks in Europe and elsewhere. Exposure science supports to ensure safe environments, reduce human health risks, and foster a sustainable future. However, increasing diversity in regulations and the lack of a professional identity as exposure scientists currently hamper developing the field and uptake into European policy.

Emerging and legacy brominated flame retardants in the breast milk of first time Irish mothers suggest positive response to restrictions on use of HBCDD and Penta- and Octa-BDE formulations.

The brominated flame retardants (BFRs) hexabromocyclododecane (HBCDD), eight polybrominated diphenyl ethers (PBDEs), and decabromodiphenyl ethane (DBDPE) were measured in 16 pools of human milk from Ireland. Concentrations of BDEs-47, -99, -100, -153, and HBCDD were significantly lower (p < 0.05) than those in Irish human milk collected in 2011.

Occupational Exposures in an Equestrian Centre to Respirable Dust and Respirable Crystalline Silica.

Sand-based products are regularly used as footing material on indoor equestrian arenas, creating a potential occupational exposure risk for respirable crystalline silica (RCS) for equestrian workers training and exercising horses in these environments. The objective of this study was to evaluate an equestrian worker's personal RCS and respirable dust (RD) exposure. Sixteen personal full-shift RD measurements were collected from an equestrian worker and analysed for RD, quartz and cristobalite.

Concentrations of Brominated Flame Retardants in Indoor Air and Dust from Ireland Reveal Elevated Exposure to Decabromodiphenyl Ethane.

Concentrations of decabromodiphenyl ethane (DBDPE), 13 polybrominated diphenyl ethers (PBDEs), and hexabromocyclododecane (HBCDD) were measured in indoor air and dust collected from Irish homes, cars, offices, and primary schools during 2016-2017. Median concentrations of DBDPE in air (88 pg/m) and dust (6500 ng/g) significantly exceed those previously reported internationally, with concentrations highest in offices and schools, suggesting that DBDPE is widely used in Ireland. Median concentrations of BDE-209 in air (340 pg/m) and dust (7100 ng/g) exceed or are within the range of concentrations reported recently for the same microenvironments in the U.

Measurement of Diacetyl and 2,3-Pentanedione in the Coffee Industry Using Thermal Desorption Tubes and Gas Chromatography-Mass Spectrometry.

Diacetyl is a potentially harmful chemical that is used as an artificial flavouring in the food industry and may also be generated during processing of some natural products including coffee. In Europe, an 8-h time weighted average occupational exposure limit (TWA-OEL) of 20 ppb has been adopted for diacetyl, together with a short-term exposure limit (STEL) of 100 ppb. A new measurement method involving sampling on thermal desorption tubes and analysis by gas chromatography-mass spectrometry has been used to investigate potential exposure to diacetyl, and the related compound 2,3-pentanedione, at eight companies involved in the coffee industry including large- and small-scale manufacturers and coffee shops.

Evaluating Glyphosate Exposure Routes and Their Contribution to Total Body Burden: A Study Among Amenity Horticulturalists.

Objective: To evaluate determinants of dermal and inadvertent ingestion exposure and assess their contribution to total body burden among amenity horticultural users using glyphosate-based pesticide products.

Methods: A dermal and inadvertent ingestion exposure assessment was completed alongside a biomonitoring study among amenity horticultural workers. Linear mixed effect regression models were elaborated to evaluate determinants of exposure and their contribution to total body burden.

Exploring the half-life of glyphosate in human urine samples.

Background: The International Agency for Research on Cancer (IARC) has recently classified glyphosate as a Group 2A 'probably carcinogenic to humans'. Due to this carcinogenic classification and resulting international debate, there is an increased demand for studies evaluating human health effects from glyphosate exposures. There is currently limited information on human exposures to glyphosate and a paucity of data regarding glyphosate's biological half-life in humans.

Characterising glyphosate exposures among amenity horticulturists using multiple spot urine samples.

Background: Glyphosate has recently received much public attention following its 'Group 2A - probably carcinogenic to humans' classification from the International Agency for Research on Cancer. Despite the widespread use of glyphosate, there is limited data on potential exposures during common occupational uses.

Objective: The study aimed to characterise occupational exposures to glyphosate among amenity horticulturists through the collection and analysis of urine samples following pesticide application.

Glyphosate in Irish adults - A pilot study in 2017.

Objectives: Glyphosate is the highest volume herbicide used globally and has recently been classified as a 2 A 'probably carcinogenic to humans' by the International Agency for Research on Cancer (IARC). There is limited data to evaluate the public health impacts from glyphosate exposure. The objective of this study is to conduct an exploratory glyphosate exposure assessment study among Irish adults, who were non-occupational users of glyphosate.

Health and Safety in Podiatric Medicine .

Background: Much of the research into health and safety in podiatric medicine to date has focused on measuring particular hazards. This study examines legislative awareness and compliance in Irish podiatric medical practices and aspects of health and safety practice.

Methods: Podiatric physicians practicing in Ireland completed a cross-sectional questionnaire survey that included measures of health and safety knowledge and awareness, compliance with legislative requirements, perceived risks, and health status.

Silica Measurement with High Flow Rate Respirable Size Selective Samplers: A Field Study.

High and low flow rate respirable size selective samplers including the CIP10-R (10 l min(-1)), FSP10 (11.2 l min(-1)), GK2.69 (4.

An evaluation of on-tool shrouds for controlling respirable crystalline silica in restoration stone work.

Objectives: The task of grinding sandstone with a 5-inch angle grinder is a major source of exposure to respirable crystalline silica (RCS), known to cause diseases such as silicosis and lung cancer among workers who work with these materials. A shroud may be a suitable engineering control for this task. The objectives of this study were to evaluate the effectiveness of four commercially available shrouds at reducing respirable dust and RCS levels during the task of grinding sandstone using tools and accessories typical of restoration stone work.

Performance of High-Flow-Rate Samplers for Respirable Crystalline Silica Measurement Under Field Conditions: Preliminary Study.

Unlabelled: Restoration stone work regularly involves work with high-silica-content materials (e.g., sandstone), but low-silica-content materials (<2 % quartz) such as limestone and lime mortar are also used.

Determinants of respirable crystalline silica exposure among stoneworkers involved in stone restoration work.

Objectives: Crystalline silica occurs as a significant component of many traditional materials used in restoration stonework, and stoneworkers who work with these materials are potentially exposed to stone dust containing respirable crystalline silica (RCS). Exposure to RCS can result in the development of a range of adverse health effects, including silicosis and lung cancer. An understanding of the determinants of RCS exposure is important for selecting appropriate exposure controls and in preventing occupational diseases.

Workplace exposure to bioaerosols in podiatry clinics.

Objectives: The aim of this study was to design and execute a pilot study to collect information on the personal exposure levels of podiatrists to microbial hazards in podiatry clinics and also to assess health and safety knowledge within the sector using a questionnaire survey.

Methods: A self-report quantitative questionnaire dealing with health and safety/health issues was issued to 250 podiatrist clinics. Fifteen podiatry clinics were randomly recruited to participate in the exposure study.

Validation of the inhalable dust algorithm of the Advanced REACH Tool using a dataset from the pharmaceutical industry.

As it is often difficult to obtain sufficient numbers of measurements to adequately characterise exposure levels, occupational exposure models may be useful tools in the exposure assessment process. This study aims to refine and validate the inhalable dust algorithm of the Advanced REACH Tool (ART) to predict airborne exposure of workers in the pharmaceutical industry. The ART was refined to reflect pharmaceutical situations.

Refinement and validation of an exposure model for the pharmaceutical industry.

Objectives: Assessment of worker's exposure is becoming increasingly critical in the pharmaceutical industry as drugs of higher potency are being manufactured. The batch nature of operations often makes it difficult to obtain sufficient numbers of exposure measurements and occupational exposure models may be useful tools in the exposure assessment process. This paper aims to describe further refinement and validation of an existing deterministic occupational exposure model to predict airborne exposure of workers in this industry.

Evaluation of hand-arm and whole-body vibrations in construction and property management.

Objectives: To identify and measure the magnitude of hand-arm vibration (HAV) and whole-body vibration (WBV) sources (tools, vehicles etc.) in use within a previously unexamined sector: a construction and property management company. To evaluate the effect of factors such as age of tool, materials being worked on, number and location of tool handles, tool weight, and manufacturer brand on HAV magnitude and the effect of factors such as manufacturer machine brand, terrain, and work task on WBV magnitude.