How spray drying processing and solution composition can affect the mAbs stability in reconstituted solutions for subcutaneous injections. Part I: Contribution of processing stresses against composition.

Spray drying is increasingly being applied to process biopharmaceuticals, particularly monoclonal antibodies (mAbs). However, due to their protein nature, mAbs are susceptible to degradation when subjected to various stresses during a drying process. Despite extensive research in this domain, identifying the appropriate formulation composition and spray drying conditions remains a complex challenge, requiring further studies to enhance the understanding on how process and formulation parameters impact mAb stability in reconstituted solutions.

How spray drying processing and solution composition can affect the mAbs stability in reconstituted solutions for subcutaneous injections. Part II: Exploring each protein stabilizer effect.

Despite extensive research in spray drying of biopharmaceuticals, identifying the optimal formulation composition and process conditions to minimize the various stresses a biopharmaceutical undergoes during this drying process. The current study extends previous research on investigating how spray drying processing and solution composition can affect the stability of monoclonal antibodies (mAbs) in reconstituted solutions for subcutaneous injections. The decoupling process stresses on a model mAb (mAb-A) compared to the effect of coupled spray-drying stresses revealed that excipients and protein concentration had a more pronounced effect on stabilizing mAb-A against shear and thermal/dehydration stresses than spray drying operating conditions.

Effect of talc and vitamin E TPGS on manufacturability, stability and release properties of trilaurin-based formulations for hot-melt coating.

This study was focused on one particular case of hot-melt coating with trilaurin - a solid medium-chain monoacid triglyceride. The challenge of using trilaurin as coating agent in melting-based processes is linked to its relatively low melting profile: 15.6 °C (T), 35.

Crosslinked chitosan microparticles as a safe and efficient DNA carrier for intranasal vaccination against cutaneous leishmaniasis.

Intranasal (i.n.) vaccination with adjuvant-free plasmid DNA encoding the leishmanial antigen LACK (LACK DNA) has shown to induce protective immunity against both cutaneous and visceral leishmaniasis in rodents.

Organogel of Acai Oil in Cosmetics: Microstructure, Stability, Rheology and Mechanical Properties.

Organogel (OG) is a semi-solid material composed of gelling molecules organized in the presence of an appropriate organic solvent, through physical or chemical interactions, in a continuous net. This investigation aimed at preparing and characterizing an organogel from acai oil with hyaluronic acid (HA) structured by 12-hydroxystearic acid (12-HSA), aiming at topical anti-aging application. Organogels containing or not containing HA were analyzed by Fourier-transform Infrared Spectroscopy, polarized light optical microscopy, thermal analysis, texture analysis, rheology, HA quantification and oxidative stability.

In Vivo Safety and Efficacy of Chalcone-Loaded Microparticles with Modified Polymeric Matrix against Cutaneous Leishmaniasis.

Current chemotherapy of cutaneous leishmaniasis (CL) is based on repeated systemic or intralesional administration of drugs that often cause severe toxicity. Previously, we demonstrated the therapeutic potential of biodegradable poly(lactic-co-glycolic acid) (PLGA) microparticles (MPs) loaded with 8% of the nitrochalcone CH8 (CH8/PLGA) prepared by a conventional bench method. Aiming at an industrially scalable process and increased drug loading, new MPs were prepared by spray drying: CH8/PDE with PLGA matrix and CH8/PVDE with PLGA + polyvinylpyrrolidone (PVP) matrix, both with narrower size distribution and higher drug loading (18%) than CH8/PLGA.

Intranasal immunization with chitosan microparticles enhances LACK-DNA vaccine protection and induces specific long-lasting immunity against visceral leishmaniasis.

Development of a protective vaccine against Leishmania depends on antigen formulation and adjuvants that induce specific immunity and long-lasting immune responses. We previously demonstrated that BALB/c mice intranasally vaccinated with a plasmid DNA encoding the p36/LACK leishmanial antigen (LACK-DNA) develop a protective immunity for up to 3 months after vaccination, which was linked with the systemic expression of vaccine mRNA in peripheral organs. In this study, LACK-DNA vaccine was associated with biocompatible chitosan microparticles cross-linked with glyceraldehyde (CMC) to boost the long-lasting immunity against the late Leishmania infantum challenge.

Direct Powder Extrusion 3D Printing of Praziquantel to Overcome Neglected Disease Formulation Challenges in Paediatric Populations.

For the last 40 years, praziquantel has been the standard treatment for schistosomiasis, a neglected parasitic disease affecting more than 250 million people worldwide. However, there is no suitable paediatric formulation on the market, leading to off-label use and the splitting of commercial tablets for adults. In this study, we use a recently available technology, direct powder extrusion (DPE) three-dimensional printing (3DP), to prepare paediatric Printlets™ (3D printed tablets) of amorphous solid dispersions of praziquantel with Kollidon VA 64 and surfactants (Span™ 20 or Kolliphor SLS).

Novel and safe single-dose treatment of cutaneous leishmaniasis with implantable amphotericin B-loaded microparticles.

The development of an effective amphotericin B (AmB) topical formulation to replace the systemically toxic injections currently used in cutaneous leishmaniasis (CL) treatment is challenging due to poor absorption through the skin. Aiming at an effective local chemotherapy, we designed PLGA (poly(lactide-co-glycolide acid) microparticles loaded with deoxycholate amphotericin B (d-AmB) for both macrophage intracellular targeting and sustained extracellular release. For that, d-AmB/PLGA microparticles with sizes ranging from 0.

Ultrasound assisted crystallization of a new cardioactive prototype using ionic liquid as solvent.

This work deals with the antisolvent crystallization of LASSBio-294 (3,4-methylenedioxybenzoyl-2-thienylhydrazon) assisted by ultrasound. An ionic liquid (IL), 1-ethyl-3-methylimidazolium methyl phosphonate [emim][CHO(H)PO] was used as solvent and water as antisolvent. The influence of the following parameters on crystals properties (size distribution, morphology, residual solvent and in vitro dissolution) were studied with two mixing mode (quick and dropwise) of solution with antisolvent.

Improved drug loading via spray drying of a chalcone implant for local treatment of cutaneous leishmaniasis.

Current chemotherapy of cutaneous leishmaniasis (CL), even the mildest forms, encompasses multiple and painful injections with toxic drugs that cause systemic adverse effects. Recently, we showed the promising use of poly(lactic-co-glycolic acid) (PLGA) microparticles loaded with an antileishmanial nitrosylated chalcone (CH8) for effective, safe, local, and single-dose treatment of CL. Here, we proposed to optimize the delivery system by increasing the CH8 loading in PLGA-microparticles using spray drying instead of emulsification-solvent evaporation.

Depot Subcutaneous Injection with Chalcone CH8-Loaded Poly(Lactic-Co-Glycolic Acid) Microspheres as a Single-Dose Treatment of Cutaneous Leishmaniasis.

Conventional chemotherapy of cutaneous leishmaniasis (CL) is based on multiple parenteral or intralesional injections with systemically toxic drugs. Aiming at a single-dose localized therapy, biodegradable poly(lactic-co-glycolic acid) (PLGA) microparticles loaded with 7.8% of an antileishmanial nitrochalcone named CH8 (CH8/PLGA) were constructed to promote sustained subcutaneous release.

Synthesis and characterization of poly(N-vinylcaprolactam)-based spray-dried microparticles exhibiting temperature and pH-sensitive properties for controlled release of ketoprofen.

Poly(N-vinylcaprolactam) (PNVCL) and poly(N-vinylcaprolactam-co-acrylic acid) (poly(NVCL-co-AA)) were synthesized by solution-free radical polymerization and displayed thermo-responsive behavior, with lower critical solution temperatures (LCSTs) of 35 °C and 39 °C, respectively. The incorporation of AA unities made the poly(NVCL-co-AA) sensitive to both pH and temperature. They were exploited in this work in preparing microparticles loaded with ketoprofen via spray-drying to modulate the drug release rate by changing pH or temperature.

Solubility and dissolution performances of spray-dried solid dispersion of Efavirenz in Soluplus.

Efavirenz (EFV), a first-line anti-HIV drug largely used as part of antiretroviral therapies, is practically insoluble in water and belongs to BCS class II (low solubility/high permeability). The aim of this study was to improve the solubility and dissolution performances of EFV by formulating an amorphous solid dispersion of the drug in polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (Soluplus) using spray-drying technique. To this purpose, spray-dried dispersions of EFV in Soluplus at different mass ratios (1:1.

Factors influencing the erosion rate and the drug release kinetics from organogels designed as matrices for oral controlled release of a hydrophobic drug.

This article proposes solid-like systems from sunflower oil structured with a fibrillar network built by the assembly of 12-hydroxystearic acid (12-HSA), a gelator molecule for an oil phase. The resulting organogels were studied as oral controlled release formulations for a lipophilic drug, Efavirenz (EFV), dissolved in the oil. The effects of the gelator concentration on the thermal properties of the organogels were studied by Differential Scanning Calorimetry (DSC) and showed that drug incorporation did not change the sol-gel-sol transitions.

Liquid anti-solvent recrystallization to enhance dissolution of CRS 74, a new antiretroviral drug.

This study concerns a new compound named CRS 74 which has the property of inhibiting Human Immunodeficiency Virus (HIV) protease, an essential enzyme involved in HIV replication process. It is proved in this study that the original CRS 74 exhibits poor aqueous solubility and a very low dissolution rate, which can influence its bioavailability and clinical response. In an attempt to improve the dissolution rate, CRS 74 was recrystallized by liquid anti-solvent (LAS) crystallization.

Gelled oil particles: a new approach to encapsulate a hydrophobic metallophthalocyanine.

Chloroaluminum phthalocyanine (ClAlPc) is a promising sensitizer molecule for photodynamic therapy, but its hydrophobicity makes it difficult to formulate. In this study, we have efficiently encapsulated ClAlPc into gelled soybean oil particles dispersed in water. 12-Hydroxystearic acid (HSA) and polyethyleneimine (PEI) were the gelling and stabilizing agents, respectively.

Sodium pantoprazole-loaded enteric microparticles prepared by spray drying: effect of the scale of production and process validation.

Pantoprazole is a prodrug used in the treatment of acid related disorders and Helicobacter pylori infections. It is activated inside gastric parietal cells binding irreversibly to the H(+)/K(+)-ATPase. In this way, pantoprazole must be absorbed intact in the intestinal tract, which indicates that enteric drug delivery systems are required for its oral administration.