Laser-Assisted Micropatterned 3D Printed Scaffolds with Customizable Surface Topography and Porosity for Modulation of Cell Function.

The dynamic interaction between cells and their substrate is a cornerstone of biomaterial-based tissue regeneration focused on unraveling the complex factors that govern this crucial relationship. A key challenge is translating physical cues from 2D to 3D due to limitations in current biofabrication techniques. In response, this study introduces an innovative approach that combines additive and subtractive manufacturing for precise surface patterning of 3D printed scaffolds.

Biocompatibility Testing of UV-Curable Polydimethylsiloxane for Human Umbilical Vein Endothelial Cell Culture on-a-Chip.

Polydimethylsiloxane (PDMS) is extensively used to fabricate biocompatible microfluidic systems due to its favorable properties for cell culture. Recently, ultraviolet-curable PDMS (UV-PDMS) has shown potential for enhancing manufacturing processes and final optical quality while retaining the benefits of traditional thermally cured PDMS. This study investigates the biocompatibility of UV-PDMS under static and flow conditions using human umbilical vein endothelial cells (HUVECs).

Photosensitive Control and Network Synchronization of Chemical Oscillators.

The Belousov-Zhabotinsky (BZ) reaction has long been a paradigmatic system for studying chemical oscillations. Here, we experimentally studied the synchronization control within photochemically coupled star networks of BZ oscillators. Experiments were carried out in wells performed in soda-lime glass constructed using novel laser technologies.

Impact of Enhanced Phagocytosis of Glycated Erythrocytes on Human Endothelial Cell Functions.

Diabetes is associated with a high mortality rate due to vascular complications. Chronic hyperglycemia in diabetes leads to enhanced oxidative stress and glycation. Here, we explored the impact of glycation on human erythrocyte characteristics and capacity to affect endothelial cell function following erythrophagocytosis.

Synergism between obesity and HFpEF on neutrophils phenotype and its regulation by adipose tissue-molecules and SGLT2i dapagliflozin.

The adiposity invokes innate immune activity, coronary microvascular dysfunction and consequently heart failure preserved ejection fraction (HFpEF). Our aim was to study the neutrophils profile on obesity and cardiovascular disease and its regulation by adipose tissue-secretome and dapagliflozin. We have isolated neutrophils from patients undergoing open heart surgery (19 women and 51 men).

Haemodynamic-dependent arrest of circulating tumour cells at large blood vessel bifurcations as new model for metastasis.

Homing of circulating tumour cells (CTC) at distant sites represents a critical event in metastasis dissemination. In addition to physical entrapment, probably responsible of the majority of the homing events, the vascular system provides with geometrical factors that govern the flow biomechanics and impact on the fate of the CTC. Here we mathematically explored the distribution of velocities and the corresponding streamlines at the bifurcations of large blood vessel and characterized an area of low-velocity at the carina of bifurcation that favours the residence of CTC.

Microfluidic devices manufacturing with a stereolithographic printer for biological applications.

Stereolithographic printers have revolutionized many manufacturing processes with their capacity to easily produce highly detailed structures. In the field of microfluidics, this technique avoids the use of complex steps and equipment of the conventional technologies. The potential of low force stereolithography technology is analysed for the first time using a Form 3B printer and seven printing resins through the fabrication of microchannels and pillars.

UV light dosage distribution over irregular respirator surfaces. Methods and implications for safety.

The SARS-CoV-2 pandemic has led to a global decrease in personal protective equipment (PPE), especially filtering facepiece respirators (FFRs). Ultraviolet-C wavelength is a promising way of decontamination, however adequate dosimetry is needed to ensure balance between over and underexposed areas and provide reliable results. Our study demonstrates that UVGI light irradiance varies significantly on different respirator angles and propose a method to decontaminate several masks at once ensuring appropriate dosage in shaded zones.

Single-pulse laser ablation threshold of borosilicate, fused silica, sapphire, and soda-lime glass for pulse widths of 500 fs, 10 ps, 20 ns.

In this work, we report a comparative study of the laser ablation threshold of borosilicate, fused silica, sapphire, and soda-lime glass as a function of the pulse width and for IR laser wavelengths. We determine the ablation threshold for three different pulse durations: τ=500  fs, 10 ps, and 20 ns. Experiments have been performed using a single laser pulse per shot in an ambient (air) environment.

Laser-based surface multistructuring using optical elements and the Talbot effect.

We present a laser based technique combined with the Talbot effect for microstructuring surfaces. The use of the Talbot effect is introduced as a solution to avoid damage of the periodic object used for micropattering different surfaces during the ablation process. The fabrication of two periodic objects (a mask and a microlens array) for micropattering surfaces and the identification of their Talbot planes is presented.

A laser-based technology for fabricating a soda-lime glass based microfluidic device for circulating tumour cell capture.

We developed a laser-based technique for fabricating microfluidic microchips on soda-lime glass substrates. The proposed methodology combines a laser direct writing, as a manufacturing tool for the fabrication of the microfluidics structures, followed by a post-thermal treatment with a CO2 laser. This treatment will allow reshaping and improving the morphological (roughness) and optical qualities (transparency) of the generated microfluidics structures.

Fluence ablation threshold dependence on tin impurities in commercial soda-lime glass.

In this paper, we study the reduction in the fluence ablation threshold induced by tin impurities incorporated in float soda-lime glass during the fabrication process. The laser system used in the experiments was a Nd:YVO4 laser operating at 1064 nm with a pulse duration of 20 ns. The fluence ablation thresholds found were 112  J/cm2 for the tin side and 920  J/cm2 for the tin-free side, which means a reduction of nearly 1 order of magnitude.

Temporal zone plate.

This paper extends the investigation of zone plates to the temporal case. By exploiting the space-time duality between the paraxial diffraction of beams in space and the linear dispersion of optical pulses, we present the time-domain analog of a multiple imaging system. The temporal system is created by using a digital chirp signal generator together with two dispersive delay lines.

Radio-frequency spectrum analysis of a jittery train after a second-order dispersive Talbot line.

The power spectral density of the intensity of coherent Gaussian pulse trains suffering timing jitter after a dispersive line with arbitrary first- (beta(2)) and second-order (beta(3)) dispersion is computed in the small-signal approximation. Due to timing jitter noise, the initial radio-frequency spectrum shows noise bands whose bandwidth and position depend, respectively, on the jitter's standard deviation and on the jitter's pulse-to-pulse correlation. After setting the accumulated first-order dispersion to Talbot conditions, it is shown that the influence on the noise spectrum is a multiplicative factor with a multiple-bandpass structure.

Talbot conditions, Talbot resonators, and first-order systems.

A study of first-order Talbot resonators is presented. The general conditions for Talbot effect in ABCD systems are determined. These conditions are applied to the computation of the diffraction overlapping coefficients between array Gaussian emitters in a general first-order Talbot resonator.