In Situ Synthesis of AZO-Np in Guar Gum/PVOH Composite Fiber Mats for Potential Bactericidal Release.

Since the number of antibiotic-resistant bacterial infections is growing and cases are getting worse every year, the search for new alternative bactericidal wound dressing treatments is becoming crucial. Within this context, the use of polysaccharides from plants and seeds in innovative biopolymer technologies is of key importance. In this work, bio-nano-composite guar gum/polyvinyl alcohol (PVOH) membranes loaded with aluminum-doped zinc oxide nanoparticles were produced via electrospinning.

Beneficial Roles of Cellulose Patch-Mediated Cell Therapy in Myocardial Infarction: A Preclinical Study.

Biological scaffolds have become an attractive approach for repairing the infarcted myocardium and have been shown to facilitate constructive remodeling in injured tissues. This study aimed to investigate the possible utilization of bacterial cellulose (BC) membrane patches containing cocultured cells to limit myocardial postinfarction pathology. Myocardial infarction (MI) was induced by ligating the left anterior descending coronary artery in 45 Wistar rats, and patches with or without cells were attached to the hearts.

Nanostructured Cellulose-Gellan-Xyloglucan-Lysozyme Dressing Seeded with Mesenchymal Stem Cells for Deep Second-Degree Burn Treatment.

Purpose: In deep burns, wound contraction and hypertrophic scar formation can generate functional derangement and debilitation of the affected part. In order to improve the quality of healing in deep second-degree burns, we developed a new treatment in a preclinical model using nanostructured membranes seeded with mesenchymal stem cells (MSCs).

Methods: Membranes were obtained by reconstitution of bacterial cellulose (reconstituted membrane [RM]) and produced by a dry-cast process, then RM was incorporated with 10% tamarind xyloglucan plus gellan gum 1:1 and 10% lysozyme (RMGT-LZ) and with 10% gellan gum and 10% lysozyme (RMG-LZ).

Effect of adding galactomannans on some physical and chemical properties of hyaluronic acid.

Hyaluronic acid (HA) and galactomannans (such as guar gum - GG and locust bean gum - LBG) are biomacromolecules with various applications due to their physicochemical characteristics in solution, especially their ability to form films or hydrogels in some conditions. Some of these applications are possible because they are nontoxic and biocompatible. Mixtures of HA and GG or LBG, at pH 7.

Salt-induced thermal gelation of xyloglucan in aqueous media.

The influence of NaSO as a kosmotropic salt on the thermogelation of xyloglucan (XG) solutions was measured by rheology. The gelation occurred at lower temperatures and shorter times when the salt concentration was increased above 0.5 mol.

Influence of mechanical pretreatment to isolate cellulose nanocrystals by sulfuric acid hydrolysis.

The mechanical pretreatments intensities on characteristics of cellulose nanocrystals (CNC) prior to acid hydrolysis was evaluated. The cellulose was submitted to mechanical pretreatment as: magnetic stirring (CNC), blending (CNC) or grinding by 20 (CNC) and 40 (CNC) passages in a super mass colloid mill. Then, all samples were submitted to HSO hydrolysis and the CNC were evaluated by total mass yield (TMY%), rheological behavior, size distribution for width/length (WD), crystallinity index (CI%), OSO substitution degree (SD) and zeta potential (ζ).

Engineered biomarkers for leprosy diagnosis using labeled and label-free analysis.

The biotechnological evolution towards the development of antigens to detect leprosy has been progressing. However, the identification of leprosy in paucibacillary patients, based solely on the antigen-antibody interaction still remains a challenge. The complexity of clinical manifestations requires innovative approaches to improve the sensitivity of assays to detect leprosy before the onset of symptoms, thus avoiding disabilities and contributing, indirectly, to reduce transmission.

Microbicidal gentamicin-alginate hydrogels.

Sodium alginate (Alg) reacted with antibiotic gentamicin sulfate (GS) in an aqueous-phase condition mediated by carbodiimide chemistry, in the molar ratios Alg: GS of (1:0.5), (1:1) and (1:2). The Alg-GS conjugated derivatives were characterized by elemental analysis for nitrogen content, Fourier transform infrared spectroscopy in the attenuated total reflection mode (FTIR-ATR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), thermogravimetric analyses (TGA) and water sorption measurements.

Xyloglucan gelation induced by enzymatic degalactosylation; kinetics and the effect of the molar mass.

Gelation kinetics of aqueous solutions of xyloglucan (XG) extracted from H. courbaril seeds were investigated, in-situ, during enzymatic removal of galactose units by oscillatory shear rheological measurements, at different XG and enzyme (β-galactosidase) concentrations. Increasing the enzyme concentration (C) led to an increase of the gelation rate.

Bacterial cellulose in biomedical applications: A review.

Bacterial cellulose (BC) derived materials represents major advances to the current regenerative and diagnostic medicine. BC is a highly pure, biocompatible and versatile material that can be utilized in several applications - individually or in the combination with different components (e.g.

Polysaccharide depolymerization from TEMPO-catalysis: Effect of TEMPO concentration.

Polysaccharide TEMPO-oxidation was monitored using automatic continuous online monitoring of polymerization reactions (ACOMP). The products of oxidation, obtained at different pHs (9, 7 and 5) and different concentrations of catalyst TEMPO, were evaluated by Automatic Continuous Mixing (ACM) and Size Exclusion Chromatography (SEC). The degree of oxidation was higher at pH 9 and polysaccharide degradation was observed under different pH conditions, but was much higher without catalyst TEMPO.

Piezoelectric immunochip coated with thin films of bacterial cellulose nanocrystals for dengue detection.

Low-cost piezoelectric devices, such as simple frequency monitoring quartz crystal microbalance (QCM) devices, have good clinical utility as fast diagnostic tools for the detection of several diseases. However, unspecific antigen recognition, poor molecular probe adsorption and the need for sample dilution are still common drawbacks that hinder their use in routine diagnosis. In this work, piezoelectric sensors were previously coated with thin films of bacterial cellulose nanocrystals (CN) to provide a more sensitive and adapted interface for the attachment of monoclonal immunoglobulin G (IgGNS1) and to favor specific detection of non-structural protein 1 (NS1) of dengue fever.

TEMPO-mediated oxidation on galactomannan: Gal/Man ratio and chain flexibility dependence.

Guar (GG) and locust bean (LBG) galactomannans (GMs) oxidation at C-6 was performed with catalyst TEMPO, in which the reaction progress was monitored by consume of NaOH solution. The products were characterized by spectroscopic analysis, infrared, and (1)H-nuclear magnetic resonance, confirming the presence of aldehydes groups as intermediate of reaction to carboxylic acid. From high performance anion exchange chromatography with pulsed amperometric detection Man/Gal molar ratio was determined and demonstrated a preference to oxidize Man during the reaction on both GMs, following a first order kinetics of oxidation.

Chitosan-coated microvesicles: Effect of polysaccharide-phospholipid affinity on decafluorobutane dissolution.

The stability of perfluorinated microvesicles is mainly determined by the presence of interfacial materials and their ability to hinder the gas component diffusibility into the bloodstream. The goal of this study is to increase the persistence of the gaseous-core by introducing chitosan-coated 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) microvesicles, reducing gas diffusion from microvesicles, and increasing for a long time ultrasonic signals. Our hypothesis was based on the irreversible adhesion of chitosan towards DSPC head groups observed in thin-films models.

Physicochemical and in vitro biocompatibility of films combining reconstituted bacterial cellulose with arabinogalactan and xyloglucan.

Reconstituted cellulose films were generated using residual bacterial cellulose membranes mechanically defibrillated (RBC fibrils) recycled following wound dressing production via a dry-cast process. Arabinogalactan (AG) extracted from Pereskia aculeata leaves and/or a xyloglucan (GHXG) from Guibourtia hymenifolia seeds were incorporating into the RBC at various compositions, and new films were created using the same process. Biocomposite properties were evaluated by scanning electron microscopy, contact angle (CA), and X-ray diffraction measurements.

Layer-by-layer polysaccharide-coated liposomes for sustained delivery of epidermal growth factor.

A three-dimensional layer-by-layer (LbL) structure composed by xanthan and galactomannan biopolymers over dioctadecyldimethylammonium bromide (DODAB) liposome template was proposed and characterized for protein drug delivery. The polymers and the surfactant interaction were sufficiently strong to create a LbL structure up to 8 layers, evaluated using quartz crystal microbalance (QCM) and zeta potential analysis. The polymer-liposome binding enthalpy was determined by isothermal titration calorimetry (ITC).

Time-dependent viscometry study of endoglucanase action on xyloglucan: A real-time approach.

Hydrolysis of xyloglucan from Tamarindus indica and Hymenaea courbaril seeds with endoglucanase (EGII), which randomly breaks the (1→4)-linked β-glycosidic bonds of the polymer chain, was monitored in real time using time-dependent viscometry analysis (TDV). For both samples there was a decrease in the intrinsic viscosity ([η]), viscosity average molar mass (Mv), radius de gyration (Rg) and persistence length (Lp) immediately after the addition of the enzyme. It was observed the formation of oligosaccharides and oligomers composed of ∼2 units, up to 140min.

Influence of two different alcohols in the esterification of fatty acids over layered zinc stearate/palmitate.

In this work, esterification of fatty acids (oleic, linoleic and stearic acid) with a commercial zinc carboxylate (a layered compound formed by simultaneous intercalation of stearate and palmitate anions) was performed. Kinetic modeling using a quasi-homogeneous approach successfully fitted experimental data at different molar ratio of fatty acids/alcohols (1-butanol and 1-hexanol) and temperature. An apparent first-order reaction related to all reactants was found and activation energy of 66 kJ/mol was reported.

Transient and quasi-permanent networks in xyloglucan solutions.

Viscoelastic properties of aqueous solutions of xyloglucan extracted from Hymenaea courbaril seeds (Jatobá gum) were investigated by rheology over a wide range of concentrations and temperatures. The polymer was characterized in dilute solutions by light scattering measurements and size exclusion chromatography. Xyloglucan formed, in semi-dilute solutions (C 0.

Wettability effect of graphene-based surfaces on silicon carbide and their influence on hydrophobicity of nanocrystalline cerium oxide films.

We investigate the water-repellent ability of graphene-based surfaces stabilized on silicon carbide (SiC) and the nanocrystalline cerium oxide (CeO2) films electrodeposited on them. Water contact angle is revealed strongly dependent on the number of graphene monolayers on SiC, indicating partial permeability of graphene on SiC. Fluctuations in the roughness of textured surfaces as well as variations of oxygen vacancy content in CeO2 electrodeposits are determinant for the hydrophobicity of the interaction between water droplets and nanocrystalline CeO2 electrodeposits on monolayers graphene on SiC.

Comparison between the interactions of the cationic surfactant DODAB with xanthan and galactomannan.

The interactions of the cationic surfactant DODAB with anionic xanthan (XAN) and nonionic galactomannan (GMC) polysaccharides in solution were investigated using tensiometry, differential scanning microcalorimetry (μ-DSC), zeta potential and dynamic light scattering (DLS) techniques and by the calculated thermodynamic parameters of ΔG(ves)(0), ΔG(ads)(0), Γ(max) and a(min). The surfactant formed large unilamellar vesicles (LUV) that aggregated with both the polymers in solution. Increasing DODAB concentrations resulted in greater and greater DODAB-XAN aggregates, high turbidity and even precipitation, while DODAB-GMC aggregates remained equal sized, clear solution and no precipitation observed.

Bioactive nanocomposites of bacterial cellulose and natural hydrocolloids.

The aim of this work was to develop bioactive films from bacterial cellulose and hydrocolloids (guar gum and hyaluronic acid), coated or not with collagen. After mechanical treatment, a suspension of cellulose nanofibres was obtained which, combined with the dispersions of hydrocolloids, was used to produce bionanocomposite films by wet casting. The materials were stable in physiological solution and presented better swelling capacity than that of the bacterial cellulose.

Lysozyme-triggered epidermal growth factor release from bacterial cellulose membranes controlled by smart nanostructured films.

A novel wound-dressing biodevice, sensitive to lysozyme, an enzyme commonly found at infected skin wounds, was assembled by the layer-by-layer deposition of nanopolymeric chitosan and alginate films onto oxidized bacterial cellulose membranes incorporated with epidermal growth factor (EGF). Distinct EGF release profiles were obtained according to specific stimuli caused by infection. In in vitro conditions simulating noninfected wounds, the EGF rate and burst release effect were reduced by three deposited layers (Mt /M∞ of 0.

Nanometric organisation in blends of gellan/xyloglucan hydrogels.

Mixtures of gellan gum (GL) and a xyloglucan (XGJ) extracted from Hymenaea courbaril seeds were prepared in a solution of 0.15 mol L(-1) NaCl. Rheology measurements revealed that 2.

Property evaluations of dry-cast reconstituted bacterial cellulose/tamarind xyloglucan biocomposites.

We describe the mechanical defibrillation of bacterial cellulose (BC) followed by the dry-cast generation of reconstituted BC films (RBC). Xyloglucan (XGT), extracted from tamarind seeds, was incorporated into the defibrillated cellulose at various compositions, and new films were created using the same process. Microscopy and contact angle analyses of films revealed an increase in the microfibre adhesion, a reduced polydispersity in the diameters of the microfibrils and increased hydrophobic behaviour as a function of %XGT.