Prevalence and factors related to anaemia in children aged 6-59 months attending a quaternary health facility in Maputo, Mozambique.

Globally, anaemia prevails as a public health issue, being also a concern in Mozambique, where about two-thirds of children 6-59 months of age are affected by this condition. We carried out this study to estimate anaemia prevalence and evaluate structural determinants and haematological parameters association among children aged 6-59 months attending pediatric inpatient and outpatient services in a Quaternary Health Facility in Maputo City Province, Mozambique. We collected data from 637 inpatients or outpatients who attended pediatric consultations at the Maputo Central Hospital.

Phenolic Extraction of Leaves in DES: Characterization of the Extracts and Their Application in Methylcellulose Films for Food Packaging.

In this work, a qualitative study of the phenolic content of leaves (MO), extracted with deep eutectic solvents (DES) based on choline chloride (ChCl) with lactic acid (LA) or glycerol (GLY), was performed by high-resolution mass spectrometry (HPLC-DAD-ESI-MS). The two solvents (DES-LA and DES-GLY) extract similar classes of phenolics, and ten compounds were identified. The antioxidant profile was also studied (TPC, TFC, DPPH, FRAP, ORAC, and ABTS).

Knowledge, attitudes and practices regarding antibiotic use in Maputo City, Mozambique.

Background: Irrational use of antibiotics is a major driver of antimicrobial resistance (AMR) worldwide. Sub-Saharan Africa, where the risk of spread of AMR is highest, lacks data on the knowledge, attitudes and practices regarding antibiotic prescription and use. This is the first study in Mozambique to address this gap.

Development of a disposable paper-based potentiometric immunosensor for real-time detection of a foodborne pathogen.

This work reports a new paper-based sensing platform and its application in a label-free potentiometric immunosensor for Salmonella typhimurium detection based on the blocking surface principle. A paper-based strip electrode was integrated with a filter paper pad which acted as a reservoir of the internal solution. The design offers a convenient platform for antibody immobilization and sampling, proving also that is a simple and affordable methodology to control an ionic flux through a polymer membrane.

Projecting the lives saved by continuing the historical scale-up of child and maternal health interventions in Mozambique until 2030.

Background: Over the past 20 years, Mozambique has achieved substantial reductions in maternal, neonatal, and child mortality. However, mortality rates are still high, and to achieve the Sustainable Development Goals (SDGs) for maternal and child health, further gains are needed. One technique that can guide policy makers to more effectively allocate health resources is to model the coverage increases and lives saved that would be achieved if trends continue as they have in the past, and under differing alternative scenarios.

Edible Chitosan Films and Their Nanosized Counterparts Exhibit Antimicrobial Activity and Enhanced Mechanical and Barrier Properties.

Chitosan and chitosan-nanoparticles were combined to prepare biobased and unplasticized film blends displaying antimicrobial activity. Nanosized chitosans obtained by sonication for 5, 15, or 30 min were combined with chitosan at 3:7, 1:1, and 7:3 ratios, in order to adjust blend film mechanical properties and permeability. The incorporation of nanosized chitosans led to improvements in the interfacial interaction with chitosan microfibers, positively affecting film mechanical strength and stiffness, evidenced by scanning electron microscopy.

Strategies to improve the mechanical strength and water resistance of agar films for food packaging applications.

Agar films possess several properties adequate for food packaging applications. However, their high cost-production and quality variations caused by physiological and environmental factors affecting wild seaweeds make them less attractive for industries. In this work, native (NA) and alkali-modified (AA) agars obtained from sustainably grown seaweeds (integrated multi-trophic aquaculture) were mixed with locust bean gum (LBG) to make 'knife-coated' films with fixed final concentration (1 wt%) and variable agar/LBG ratios.

Improving agar electrospinnability with choline-based deep eutectic solvents.

Very recently our group has produced novel agar-based fibers by an electrospinning technique using water as solvent and polyvinyl alcohol (PVA) as co-blending polymer. Here, we tested the deep eutectic solvent (DES), (2-hydroxyethyl)trimethylammonium chloride/urea prepared at 1:2 molar ratio, as an alternative solvent medium for agar electrospinning. The electrospun materials were collected with an ethanol bath adapted to a previous electrospinning set-up.

Alternative plasticizers for the production of thermo-compressed agar films.

Agar films were produced by thermo-compression using choline chloride (ChCl) as a plasticizer with urea. The three solid components were mixed together with the salt and urea (minor components) added to agar (main component) according to a fixed mass ratio of, respectively, 1.16:1:5.

Electrospinning of agar/PVA aqueous solutions and its relation with rheological properties.

In this work, we report the successful fabrication of agar-based nanofibers by electrospinning technique, using water as solvent media. A tubeless spinneret was attached inside the electrospinning chamber, operating at 50°C, to avoid agar gelation. Agar pure solution (1 wt%) showed inadequate spinnability regardless of the used electrospinning conditions.

Choline chloride based ionic liquid analogues as tool for the fabrication of agar films with improved mechanical properties.

In the present paper, we test the suitability of ChCl/urea (DES-U) and ChCl/glycerol (DES-G) eutectic mixtures, each one prepared at 1:2 molar ratio, for the production of agar films. A three-step process is proposed: pre-solubilization of polymer in DES followed by compression-molding and subsequent drying. The mechanical properties, water resistance and microstructure of the films were evaluated at different polymer concentrations (i.

Rheological and structural characterization of agar/whey proteins insoluble complexes.

Complex coacervation between whey proteins and carboxylated or highly sulphated polysaccharides has been widely studied. The aim of this work was to characterise a slightly sulphated polysaccharide (agar) and whey protein insoluble complexes in terms of yield, composition and physicochemical properties as well as to study their rheological behaviour for better understanding their structure. Unlike other sulphated polysaccharides, complexation of agar and whey protein at pH 3 in the absence of a buffering agent resulted in a coacervate that was a gel at 20°C with rheological properties and structure similar to those of simple agar gels, reinforced by proteins electrostatically aggregated to the agar network.

Influence of the extraction process on the rheological and structural properties of agars.

Agars obtained by traditional hot-water (TWE) and microwave-assisted (MAE) extractions were compared in terms of their rheological and physicochemical properties and molecular self-association in solutions of low (0.05%, w/w) and high (1.5%, w/w) polymer concentrations.

Study of the rheological behaviour of human blood using a controlled stress rheometer.

The aim of this work was to investigate the rheological behaviour of human blood, in a controlled stress rheometer, using different cone-plate and parallel plate geometries. Steady-shear (flow curves and kinetics) and oscillatory (strain, frequency and time sweeps) tests were performed at 37°C. The results demonstrated that rheological data are significantly influenced by the measuring geometry and the rheological parameters obtained from rheological models must be analysed with great caution.

Interactions of microbicide nanoparticles with a simulated vaginal fluid.

The interaction with cervicovaginal mucus presents the potential to impact the performance of drug nanocarriers. These systems must migrate through this biological fluid in order to deliver their drug payload to the underlying mucosal surface. We studied the ability of dapivirine-loaded polycaprolactone (PCL)-based nanoparticles (NPs) to interact with a simulated vaginal fluid (SVF) incorporating mucin.

Complexation of WPI and microwave-assisted extracted agars with different physicochemical properties.

The complex formation between whey protein isolate (WPI) and agar has been investigated and their interactions were monitored as a function of the physicochemical properties of agar, the pH and the ionic strength of the medium. Agars from Gracilaria vermiculophylla were extracted under different MAE conditions and characterized according to their physicochemical properties. By using microwave irradiation a wide variety of agars was obtained, as different MAE conditions results in polyelectrolytes with distinct properties.

Structural, physical, and chemical modifications induced by microwave heating on native agar-like galactans.

Native agars from Gracilaria vermiculophylla produced in sustainable aquaculture systems (IMTA) were extracted under conventional (TWE) and microwave (MAE) heating. The optimal extracts from both processes were compared in terms of their properties. The agars' structure was further investigated through Fourier transform infrared and NMR spectroscopy.

Rheological properties of vaginal hydrophilic polymer gels.

The objective of this work was to investigate the main theological features of vaginal hydrophilic polymer gels and to elucidate about the relationship between these characteristics and gels composition, and their general influence in therapeutic/usage purpose. Flow and dynamic oscillatory properties of four commercially available (Conceptrol, Gynol II, RepHresh, and Replens) and two investigational vaginal gels were determined by cone-and-plate rheometry, at body temperature. Several parameters (apparent viscosity, complex viscosity, storage modulus, loss modulus, critical oscillatory stress, tan delta, thixotropy and yield stress) were measured and/or calculated.