Impact of algal organic matter released from Microcystis aeruginosa and Chlorella sp. on the fouling of a ceramic microfiltration membrane.

Algal blooms lead to the secretion of algal organic matter (AOM) from different algal species into water treatment systems, and there is very limited information regarding the impact of AOM from different species on the fouling of ceramic microfiltration (MF) membranes. The impact of soluble AOM released from Microcystis aeruginosa and Chlorella sp. separately and together in feedwater on the fouling of a tubular ceramic microfiltration membrane (alumina, 0.

Degradation of dimethyl sulfoxide through fluidized-bed Fenton process.

Dimethyl sulfoxide (DMSO), one of the most widely used solvent, was subjected to fluidized-bed Fenton oxidation in this study. Fenton oxidation is considered one of the cheapest advanced oxidation processes due to high availability of Fenton's reagents Fe(2+) and H2O2, wherein, Fe(2+) catalyzes hydroxyl radical production from H2O2. Fluidized-bed Fenton process is a modified approach which is also used to address the production of large amount of iron oxide sludge in conventional Fenton process.

Barium recovery by crystallization in a fluidized-bed reactor: effects of pH, Ba/P molar ratio and seed.

The effects of process conditions, including upward velocity inside the column, the amount of added seed and seed size, the pH value of the precipitant or the phosphate stream and the Ba/P molar ratio in a fluidized-bed reactor (FBR) were studied with a view to producing BaHPO₄ crystals of significant size and maximize the removal of barium. XRD were used to identify the products that were collected from the FBR. Experimental results show that an upward velocity of 48 cmmin(-1) produced the largest BaHPO₄ crystals with a size of around 0.

Feasibility studies on arsenic removal from aqueous solutions by electrodialysis.

The effectiveness of electrodialysis (ED) in removing inorganic arsenic (As) from aqueous solution was investigated. A tailor-made ED stack was used to perform current-voltage and optimization experiments in a recirculating batch mode. Samples were pre-oxidized with NaClO using 1:2 sample to oxidant weight ratio (RS:O) to transform 100% of As(III) to As(V) in 180 seconds.

Adsorption of Mn2+ from aqueous solution using Fe and Mn oxide-coated sand.

The adsorption of Mn2+ onto immobilized Mn-oxide and Fe-oxide adsorbent such as manganese oxide-coated sandl (MOCS1), manganese oxide-coated sand2 (MOCS2), iron oxide-coated sand2 (IOCS2), and manganese and iron oxide-coated sand (MIOCS) was investigated. The effects of pH (5.5 to 8.

Photocatalytic degradation of acetaminophen in modified TiO2 under visible irradiation.

This study investigated the photocatalytic degradation of acetaminophen (ACT) in synthetic titanium dioxide (TiO2) solution under a visible light (λ >440 nm). The TiO2 photocatalyst used in this study was synthesized via sol-gel method and doped with potassium aluminum sulfate (KAl(SO4)2) and sodium aluminate (NaAlO2). The influence of some parameters on the degradation of acetaminophen was examined, such as initial pH, photocatalyst dosage, and initial ACT concentration.