Producing agri-food derived composts from coffee husk as primary feedstock at different temperature conditions.

There is a great global concern about agricultural wastes from food and feed crop processing that have significant environmental impacts. Composting is the most environmentally friendly, cost-effective, and efficient processes that can solve the problems of accumulation and toxicity of agricultural waste. The aim of this study is the detoxification of coffee husk by composting at two temperature conditions ("warm" and "cold").

Development of activated carbons derived from wastes: coffee grounds and olive stones as potential porous materials for air depollution.

Agro-industrial byproducts and food waste necessitate an environmentally friendly way of reducing issues related to their disposal; it is also necessary to recover as much new raw material from these resources as possible, especially when we consider their potential usage as a precursor for preparing depolluting materials, such as activated carbon. In this work, coffee grounds and olive stones were chosen as precursors and the adsorption capacity of the obtained porous carbons for volatile organic compounds (VOCs) was studied. Microporous activated carbons (ACs) were prepared using chemical (KCO) and physical (CO) activation.

New Materials and Technologies for Durability and Conservation of Building Heritage.

The increase in concrete structures' durability is a milestone to improve the sustainability of buildings and infrastructures. In order to ensure a prolonged service life, it is necessary to detect the deterioration of materials by means of monitoring systems aimed at evaluating not only the penetration of aggressive substances into concrete but also the corrosion of carbon-steel reinforcement. Therefore, proper data collection makes it possible to plan suitable restoration works which can be carried out with traditional or innovative techniques and materials.

monitoring of a room temperature nanocomposite methanol sensor.

The sensing of volatile organic compounds by composites containing metal oxide semiconductors is typically explained adsorption-desorption and surface electrochemical reactions changing the sensor's resistance. The analysis of molecular processes on chemiresistive gas sensors is often based on indirect evidence, whereas or studies monitoring the gas/surface interactions enable a direct insight. Here we report a cross-disciplinary approach employing spectroscopy of working sensors to investigate room temperature methanol detection, contrasting well-characterized nanocomposite (TiO@rGO-NC) and reduced-graphene oxide (rGO) sensors.

Microstructural Features in Multicore Cu-Nb Composites.

The study is devoted to heavily drawn multicore Cu-18Nb composites of cylindrical and rectangular shapes. The composites were fabricated by the melt-and-deform method, namely, 600 in situ rods of Cu-18%Nb alloy were assembled in a copper shell and cold-drawn to a diameter of 15.4 mm (e = 10.

Characterization and Filtration Efficiency of Sustainable PLA Fibers Obtained via a Hybrid 3D-Printed/Electrospinning Technique.

The enormous world demand for personal protective equipment to face the current SARS-CoV-2 epidemic has revealed two main weaknesses. On one hand, centralized production led to an initial shortage of respirators; on the other hand, the world demand for single-use equipment has had a direct and inevitable effect on the environment. Polylactide (PLA) is a biodegradable, biocompatible, and renewable thermoplastic polyester, mainly derived from corn starch.

Transformation of industrial and organic waste into titanium doped activated carbon - cellulose nanocomposite for rapid removal of organic pollutants.

Production of cost-efficient composite materials with desired physicochemical properties from low-cost waste material is much needed to meet the growing needs of the industrial sector. As a step forward, the current study reports for the first time an effective utilization of industrial metal (inorganic) waste as well as fall leaves (organic waste), to produce three types of nanomaterials at the same time; "Titanium Doped Activated Carbon Nanostructures (Ti-ACNs)", "Nanocellulose (NCel)", and combination of both "Titanium Doped Activated Carbon Cellulose Nanocomposite (Ti-AC-Cel-NC)". X-ray diffraction (XRD), transmission electron microscopy (TEM) and microanalysis (EDXS) measurements reveal that the Ti-ACNs material is formed by Ti-nanostructures, generally poorly crystalized but in some cases forming hexagonal Ti-crystallites of 15 nm, embedded in mutated graphene clouds.

Post-digestate composting benefits and the role of enzyme activity to predict trace element immobilization and compost maturity.

The current study evaluated the quality of agricultural waste digestate by composting or co-composting with biogas feedstock (maize silage, food processing waste, or poultry litter). Temperature, phytotoxicity, C/N ratio, water extractable trace elements, and 14 enzyme activities were monitored. Temperature dropped earlier in digestate and maize silage co-composting pile, reducing time to maturity by 20 days.

The Critical Raw Materials Issue between Scarcity, Supply Risk, and Unique Properties.

This editorial reports on a thorough analysis of the abundance and scarcity distribution of chemical elements and the minerals they form in the Earth, Sun, and Universe in connection with their number of neutrons and binding energy per nucleon. On one hand, understanding the elements' formation and their specific properties related to their electronic and nucleonic structure may lead to understanding whether future solutions to replace certain elements or materials for specific technical applications are realistic. On the other hand, finding solutions to the critical availability of some of these elements is an urgent need.

Cigarette butts, a threat for marine environments: Lessons from benthic foraminifera (Protista).

Cigarette butts are the most common form of litter in the world and their environmental impact is related to both persistence and potential toxic effects for chemical composition. The objective of this study was to assess the acute toxicity (LC-48 h) of human-smoked cigarette butts leachate on 3 cultured genera of benthic foraminifera: the calcareous perforate Rosalina globularis, the calcareous imperforate Quinqueloculina spp., and the agglutinated Textularia agglutinans.

A Novel Method for the Combined Photocatalytic Activity Determination and Bandgap Estimation.

The ability of a photocatalyst to degrade a target pollutant is a commonly used method to assess its effectiveness for environmental applications, while ultraviolet-visible (UV-vis) spectroscopy and spectroscopic ellipsometry are conventional techniques for the estimation of a semiconductor band gap. In this work, an array of six light-emitting diodes (LEDs), characterized by different emission peaks between 470-370 nm and absorbed power of 3 W, was implemented into an existing standard testing apparatus for the testing of nitrogen oxides degradation in air. The abatement indexes, obtained under different LEDs irradiation, were firstly compared to the ones determined according the standard and, secondly, correlated with the measured LED emission spectrum, in order to estimate the photocatalyst band gap.

Tailoring Electro/Optical Properties of Transparent Boron-Doped Carbon Nanowalls Grown on Quartz.

Carbon nanowalls (CNWs) have attracted much attention for numerous applications in electrical devices because of their peculiar structural characteristics. However, it is possible to set synthesis parameters to vary the electrical and optical properties of such CNWs. In this paper, we demonstrate the direct growth of highly transparent boron-doped nanowalls (B-CNWs) on optical grade fused quartz.

Influence of Binders and Lightweight Aggregates on the Properties of Cementitious Mortars: From Traditional Requirements to Indoor Air Quality Improvement.

Innovative and multifunctional mortars for renders and panels were manufactured using white photocatalytic and non-photocatalytic cement as binder. Unconventional aggregates, based on lightweight materials with high specific surface and adsorbent properties, were adopted in order to investigate the possible ability to passively improve indoor air quality. The reference mortar was manufactured with traditional calcareous sand.

Solutions for Critical Raw Materials under Extreme Conditions: A Review.

In Europe, many technologies with high socio-economic benefits face materials requirements that are often affected by demand-supply disruption. This paper offers an overview of critical raw materials in high value alloys and metal-matrix composites used in critical applications, such as energy, transportation and machinery manufacturing associated with extreme working conditions in terms of temperature, loading, friction, wear and corrosion. The goal is to provide perspectives about the reduction and/or substitution of selected critical raw materials: Co, W, Cr, Nb and Mg.

Appraisal of a hybrid air cleaning process.

Nowadays, there is an amplified interest in maintaining suitable indoor air quality (IAQ). Besides a wide range of available interventions, air cleaners are considered a valuable tool, since based on inexpensive and easily implementing technologies to improve IAQ. The purpose of this work is to combine the TiO-photocatalysis with the electrostatic and adsorption processes, in order to improve efficiency and reliability.

Design and calibration of an organic diffusive probe to extend the diffusion gradient technique to organic pollutants.

The objective of this study was to develop a method for measuring the mobility of persistent organic pollutants in the solid phase of soils within the context of environmental pollution risk assessment. A new diffusive probe, purposely designed by adapting the diffusive gradient technique method, measures labile organic species by immobilizing them after diffusion through a thin deionized water layer. The measure of the mass accumulated is used to calculate the flow of pollutant from solid phase to pore water.

DGT use in contaminated site characterization. The importance of heavy metal site specific behaviour.

The objective of this study is to provide an insight into the techniques for measuring the lability of heavy metals in solid-phase pool of soils in order to assess the environmental risk arising from pollution. The technique of diffusive gradients in thin films (DGT) and a sequential extraction procedure were used to quantify the labile pools of Cu, Fe, Mn and Ni. These results were compared to metal concentrations in groundwater, measured directly using the in situ piezometers, and to the total concentration of metal in the soils.

Surfactant effects on electrokinetic processes in clay-rich soils remediation.

The present work concerns the realisation of an equipment suitable for the choice of surfactants to be employed in the remediation of polluted soils by soil washing processes. The experimental activity has been focused to verify the surfactants efficiency in electrokinetic processes applied in low porosity soils, polluted with used vehicle oil. The equipment consents to estimate low electroosmotic permeabilities, electrical current and to analyse the electrolytic solutions.