Recent Advances in Polymer Science and Fabrication Processes for Enhanced Microfluidic Applications: An Overview.

This review explores significant advancements in polymer science and fabrication processes that have enhanced the performance and broadened the application scope of microfluidic devices. Microfluidics, essential in biotechnology, medicine, and chemical engineering, relies on precise fluid manipulation in micrometer-sized channels. Recent innovations in polymer materials, such as flexible, biocompatible, and structurally robust polymers, have been pivotal in developing advanced microfluidic systems.

Valorizing Tea Waste: Green Synthesis of Iron Nanoparticles for Efficient Dye Removal from Water.

This study explores the valorization of tea leaf waste by extracting polyphenols through reflux extraction, subsequently using them to synthesize zero-valent iron nanoparticles (nZVI). The in situ generated nanoparticles, when combined with fixed amounts of hydrogen peroxide, facilitated the removal of various dyes (methylene blue, methyl orange, and orange G) via a hetero-catalytic Fenton process. The iron nanoparticles were thoroughly characterized by gas adsorption of N at 77 K, scanning electron microscopy (SEM), Transmission Electron Microscopy (TEM), FT-IR spectroscopy, X-ray diffraction (XRD), and thermal analysis, including thermogravimetric analysis (TG) and temperature-programmed reduction (TPR).

Olive-tree polyphenols and urban mining. A greener alternative for the recovery of valuable metals from scrap printed circuit boards.

Recycling printed circuit boards (PCBs) is becoming a source of precious metals and an alternative to conventional mining. This phenomenon is now known as "urban mining." In this work, a polyphenols-rich plant extract has been obtained from olive-tree leaves, and its ability to contribute to reducing four metals, namely, Ag, Cu, Cr, and Sn, that are present in scrap PCBs has been studied.

Single adsorption of diclofenac and ronidazole from aqueous solution on commercial activated carbons: effect of chemical and textural properties.

The importance of the textural and physicochemical characteristics upon the adsorption capacity of the commercial activated carbons (ACs) Coconut, Wood, Merck, Darco, and Norit towards ronidazole (RNZ) and diclofenac (DCF) from water solution was investigated thoroughly in this work. At pH = 7, Coconut AC and Wood AC presented the highest adsorption capacity towards RNZ (444 mg/g) and DCF (405 mg/g). The maximum mass of RNZ adsorbed onto Coconut AC was higher in this study than those outlined previously in other works.

Preparation of high-quality activated carbon from polyethyleneterephthalate (PET) bottle waste. Its use in the removal of pollutants in aqueous solution.

A waste-treats-waste approach has been used for the removal of two common pollutants, namely p-nitrophenol and/or Fe(III) from aqueous solution. Polyethyleneterephthalate (PET) from bottle waste has been used as the precursor for the preparation of activated carbons (ACs) by physical activation with steam and chemical activation with potassium hydroxide under controlled heating conditions and atmospheres. The resulting ACs were characterized in terms of chemical composition, porous texture and surface chemistry, and morphology.

On the use of a natural peat for the removal of Cr(VI) from aqueous solutions.

A natural peat has been used as an adsorbent for the removal of hexavalent chromium from aqueous solution. The peat was firstly characterized in terms of particle size and chemical composition (ash content, pH of the point of zero charge, FT-IR and thermal analysis). Next, the kinetic and equilibrium aspects of the adsorption of Cr(VI) by this adsorbent were studied.

Sorption of arsenic, cadmium, and lead by chars produced from fast pyrolysis of wood and bark during bio-oil production.

Bio-char by-products from fast wood/bark pyrolyses, were investigated as adsorbents for the removal of the toxic metals (As(3+), Cd(2+), Pb(2+)) from water. Oak bark, pine bark, oak wood, and pine wood chars were obtained from fast pyrolysis at 400 and 450 degrees C in an auger-fed reactor and characterized. A commercial activated carbon was also investigated for comparison.

Stopped flow kinetic-spectrophotometric determination of Diquat in waters.

Using the measures of initial reaction rate, a kinetic-photometric method is developed that uses the reaction of Diquat with H2O2 in basic medium. The reaction rate is very high and therefore the stopped-flow mixing technique is required in order to make kinetic measurements. The reaction rate is obtained in 20 s after the reactants are mixed and it allows the simple application of the method proposed to the routine analyses.