In vitro and in vivo evaluation of an oral multiple-unit formulation for colonic delivery of insulin.

A multiple-unit formulation for time-dependent colonic release of insulin was obtained by coating insulin and sodium glycocholate immediate-release minitablets with: (i) Methocel® E50, a low-viscosity hydroxypropyl methylcellulose (inner coating), (ii) 5:1 w/w Eudragit® NE/Explotab® V17, a mixture of a neutral polymethacrylate with a pore-forming superdisintegrant (intermediate coating), and (iii) Aqoat® AS, enteric-soluble hydroxypropyl methylcellulose acetate succinate (outer coating). Sodium glycocholate was added as a permeation enhancer while the inner, intermediate and outer coatings were aimed, respectively, at delaying the onset of release through swelling/erosion processes, extending the duration of the lag phase by slowing down water penetration into the underlying functional layer, and overcoming variable gastric residence time. In vitro studies showed that neither insulin nor sodium glycocholate were released from the three-layer system during 2h of testing in 0.

Oral delivery of insulin via polyethylene imine-based nanoparticles for colonic release allows glycemic control in diabetic rats.

In this study, insulin-containing nanoparticles were loaded into pellet cores and orally administered to diabetic rats. Polyethylene imine-based nanoparticles, either placebo or loaded with insulin, were incorporated by extrusion and spheronization technology into cores that were subsequently coated with three overlapping layers and a gastroresistant film. The starting and coated systems were evaluated in vitro for their physico-technololgical characteristics, as well as disintegration and release performance.

Evaluation of hot-melt extrusion and injection molding for continuous manufacturing of immediate-release tablets.

The exploitation of hot-melt extrusion and injection molding for the manufacturing of immediate-release (IR) tablets was preliminarily investigated in view of their special suitability for continuous manufacturing, which represents a current goal of pharmaceutical production because of its possible advantages in terms of improved sustainability. Tablet-forming agents were initially screened based on processability by single-screw extruder and micromolding machine as well as disintegration/dissolution behavior of extruded/molded prototypes. Various polymers, such as low-viscosity hydroxypropylcellulose, polyvinyl alcohol, polyvinyl alcohol-polyethylene glycol graft copolymer, various sodium starch glycolate grades (e.

Erodible time-dependent colon delivery systems with improved efficiency in delaying the onset of drug release.

To prepare swellable/erodible time-dependent colon delivery systems with improved efficiency in delaying drug release, the application of an outer Eudragit® NE film, which contained the superdisintegrant Explotab® V17 as a pore former, was attempted. Tablet cores were successively spray-coated with a hydroxypropyl methylcellulose (HPMC) solution and diluted Eudragit® NE 30 D, wherein fixed amounts of Explotab® V17 were present. The resulting two-layer systems yielded lag phases of extended duration as compared with formulations provided with the HPMC layer only.

Evaluation of hot-melt extrusion technique in the preparation of HPC matrices for prolonged release.

The aim of the work was to explore the potential of hot-melt extrusion (HME) for preparing hydroxypropyl cellulose (HPC)-based prolonged-release matrices intended for oral administration. For this purpose, compressed and extruded systems, either composed of polymer only or containing different amounts of a model drug (theophylline or ketoprofen), were compared. The overall morphological/physical changes of the systems following interaction with water indicated that the manufacturing process would not exert a major influence on the swelling behavior of the polymeric matrices.

Film coatings for oral colon delivery.

Oral colon delivery is pursued through a number of formulation strategies with the aim of enabling effective and well-tolerated treatments for large bowel pathologies or enhancing the intestinal absorption of peptide and protein drugs. According to such strategies, coated dosage forms for colonic release may be provided with microbiota, pH, pressure or time-dependent polymeric films. Microbiota-activated coatings are mostly obtained from polysaccharides of natural origin mixed with insoluble structuring excipients.

Polymeric coatings for a multiple-unit pulsatile delivery system: preliminary study on free and applied films.

In order to adapt a previously described swellable/erodible pulsatile delivery system to a multiple-unit configuration, insoluble films with adequate permeability and flexibility were proposed for application to its functional hydroxypropyl methylcellulose (HPMC) layer. By slowing down the penetration of water into the system, such films would be expected to improve the relevant effectiveness in delaying the onset of release without possibly impacting on the mechanism involved. Free films of Eudragit(®)NE containing differing amounts (10-20%) of a superdisintegrant, i.

Oral colon delivery of insulin with the aid of functional adjuvants.

Oral colon delivery is currently considered of importance not only for the treatment of local pathologies, such as primarily inflammatory bowel disease (IBD), but also as a means of accomplishing systemic therapeutic goals. Although the large bowel fails to be ideally suited for absorption processes, it may indeed offer a number of advantages over the small intestine, including a long transit time, lower levels of peptidases and higher responsiveness to permeation enhancers. Accordingly, it has been under extensive investigation as a possible strategy to improve the oral bioavailability of peptide and protein drugs.

Oral delivery system for two-pulse colonic release of protein drugs and protease inhibitor/absorption enhancer compounds.

It is well known that the intestinal stability and absorption of protein drugs are improved when enzyme inhibitors/permeation enhancers are coadministered. Recently, it was hypothesized that an increased effectiveness of these adjuvants might be achieved by timing their release prior to that of the protein, so that a more favorable environment would be established in advance. Therefore, an oral system was proposed for two-pulse colonic release of insulin and the protease inhibitor camostat mesilate/absorption enhancer sodium glycocholate.

Oral pulsatile delivery: rationale and chronopharmaceutical formulations.

Oral pulsatile/delayed delivery systems are designed to elicit programmable lag phases preceding a prompt and quantitative, repeated or prolonged release of drugs. Accordingly, they draw increasing interest because of the inherent suitability for accomplishing chronotherapeutic goals, which have recently been highlighted in connection with a number of widespread chronic diseases with typical night or early-morning recurrence of symptoms (e.g.

Preparation and evaluation of an oral delivery system for time-dependent colon release of insulin and selected protease inhibitor and absorption enhancer compounds.

The aim of this work was to prepare and evaluate an oral dosage form intended for time-dependent colon delivery of insulin along with a selected protease inhibitor (camostat mesilate) and absorption enhancer (sodium glycocholate). A previously described release platform, which had proven potentially suitable for the protein delivery, was exploited. Insulin compatibility with the above-mentioned adjuvants was preliminarily evaluated.

Feasibility, stability and release performance of a time-dependent insulin delivery system intended for oral colon release.

The aim of the present work was to evaluate the viability of a time-dependent delivery platform (Chronotopic) in preparing an insulin-based system intended for oral colon delivery. The main objectives were to assess the influence of the manufacturing process and storage conditions on the protein stability. Insulin-loaded cores were manufactured by direct compression and were subsequently coated with hydroxypropyl methylcellulose (HPMC) in a top-spray fluid bed up to increasing weight gains, namely 20%, 60% and 100%.

Transport characteristics of a beta sheet breaker peptide across excised bovine nasal mucosa.

The purpose of the present study was to investigate the permeation characteristics of the beta sheet breaker peptide AS 602704 (BSB) on excised bovine nasal mucosa using an Ussing chamber model. The influence of various absorption enhancers such as sodium cholate, sodium dodecyl sulfate (SDS), cetrimidum, sodium caprate, Na(2)EDTA, polycarbophil (PCP), the thiomer conjugate polycarbophil-cysteine (PCP-Cys), and poly-l-arginine (poly-l-arg; 100 kDa) was evaluated. Additionally, the influence of temperature and pH on the transport rate as well as the stability of the peptide drug against enzymatic degradation were investigated in vitro.

The use of thiolated polymers as carrier matrix in oral peptide delivery--proof of concept.

It was the aim of this study to develop an oral delivery system for the peptide drug antide. The stability of the therapeutic peptide towards gastrointestinal peptidases was evaluated. The therapeutic agent and the permeation mediator glutathione were embedded in the thiolated polymer chitosan-4-thio-butylamidine conjugate (chitosan-TBA conjugate) and compressed to tablets.

NMR conformational analysis of antide, a potent antagonist of the gonadotropin releasing hormone.

Antide is a decapeptide [(N-Ac-D-Nal(1)-D-Cpa(2)-D-Pal(3)-Ser(4)-Lys(Nic)(5)-D-Lys(Nic)(6)-Leu(7)-Ilys(8)-Pro(9)-D-Ala(10)-NH(2)] that acts in vivo as an antagonist of GnRH (gonadotropin-releasing hormone). The conformational behavior of antide has been studied in water, TFE, DMF, and DMSO solutions by means of 2D-NMR spectroscopy and molecular dynamics calculations. Antide adopts in aqueous solution a delta-shaped backbone conformation, which is characterized by an irregular turn around residues D-Pal(3)-Ser(4) and by the close spatial proximity of the side chains belonging to D-Nal(1) and Ilys(8) (as many as 17 NOE peaks were detected between these side chains).