Bonding of resin luting materials to titanium and titanium alloy.

Recently in Japan, due to the increased prices of palladium and gold, cast titanium restorations have been included in the Japanese national health insurance system. The purpose of this review was to survey the available literature on titanium bonding systems, focusing on the adhesive monomer in the luting agent in order to expand the application of resin-bonded fixed prostheses made of titanium or titanium alloys. It was found that adhesive monomers are effective for bonding to titanium, and provide results equal to the procedures of silanization and tribochemical silica coating.

Biofilm accumulation on additive manufactured Ti-6Al-4V alloy surfaces.

Purpose: This study investigated whether additive manufactured (AM) surfaces inhibit accumulation of bacterial biofilm on the surfaces of Ti-6Al-4V alloy dental implants. Bacterial biofilms are thought to cause peri-implant disease, which develops in mucosa surrounding titanium (Ti) and Ti alloy dental implants and can lead to bone loss and implant failure.

Methods: Accumulation of a Streptococcus mutans (ATCC 25175) biofilm on Ti-6Al-4V alloy was compared in relation to fabrication method, ie, AM using electron beam melting (EBM) or laser beam melting (LBM).

Fatigue testing of electron beam-melted Ti-6Al-4V ELI alloy for dental implants.

Customized one-component dental implants have been fabricated using Electron Beam Melting(®) (EBM(®)), which is a rapid prototyping and manufacturing technique. The goal of our study was to determine the effect of electron beam orientation on the fatigue resistance of EBM Ti-6Al-4V ELI alloy. EBM technique was used to fabricate Ti-6Al-4V ELI alloy blocks, which were cut into rectangular beam specimens with dimensions of 25 × 4 × 3 mm, such that electron beam orientation was either parallel (group A) or perpendicular (group B) to the long axis of the specimens.

Fabrication of titanium removable dental prosthesis frameworks with a 2-step investment coating method.

Statement Of Problem: Although pure titanium is known to have good biocompatibility, a titanium alloy with better strength is needed for fabricating clinically acceptable, partial removable dental prosthesis (RDP) frameworks.

Purpose: The mechanical properties of an experimental Ti-5Al-5Cu alloy cast with a 2-step investment technique were examined for RDP framework applications.

Material And Methods: Patterns for tests for various properties and denture frameworks for a preliminary trial casting were invested with a 2-step coating method using 2 types of mold materials: a less reactive spinel compound (Al(2)O(3)·MgO) and a less expensive SiO(2)-based material.

The effect of multiple firings on the marginal integrity of pressable ceramic single crowns.

Statement Of Problem: The marginal adaptation of metal ceramic crowns is affected by firing cycles for veneering porcelain application. The effect of multiple firings on the marginal integrity of pressable ceramic core crowns is unknown.

Purpose: The purpose of this in vitro study was to evaluate the effect of repeated firing cycles on the marginal discrepancy of veneered (layered) pressable ceramic anterior crowns with 2 different finish line configurations.

Evaluation of Titanium Alloys Fabricated Using Rapid Prototyping Technologies-Electron Beam Melting and Laser Beam Melting.

This study characterized properties of Ti-6Al-4V ELI (extra low interstitial, ASTM grade 23) specimens fabricated by a laser beam melting (LBM) and an electron beam melting (EBM) system for dental applications. Titanium alloy specimens were made into required size and shape for each standard test using fabrication methods. The LBM specimens were made by an LBM machine utilizing 20 µm of Ti-6Al-4V ELI powder.

Elemental ion release from four different fixed prosthodontic materials.

Objective: Elemental release is important because it plays a significant role in material biocompatibility. The aim of this study was to investigate the release of metal ions from four fixed prosthodontic materials.

Methods: Specimens were prepared using the conventional lost wax technique for gold and nickel-chromium (Ni-Cr) alloys, and by cutting blocks and bar for CAD-CAM ceramic and stainless-steel (St-St) alloy, respectively.

Posterior amalgam restorations--usage, regulation, and longevity.

The use of dental amalgam has declined, but in most of the world, amalgam is the most widely used and widely taught direct restorative material for load-bearing posterior restorations. There are few national regulations on the use of amalgam; however, there are several nations where few amalgam restorations are placed. Long-term studies have shown that under optimum conditions, posterior restorations of amalgam and resin composite last longer than reported previously and that amalgam restorations outlast composite restorations.