Cobalt-based nanoparticles prepared from MOF-carbon templates as efficient hydrogenation catalysts.

The development of efficient and selective nanostructured catalysts for industrially relevant hydrogenation reactions continues to be an actual goal of chemical research. In particular, the hydrogenation of nitriles and nitroarenes is of importance for the production of primary amines, which constitute essential feedstocks and key intermediates for advanced chemicals, life science molecules and materials. Herein, we report the preparation of graphene shell encapsulated CoO- and Co-nanoparticles supported on carbon by the template synthesis of cobalt-terephthalic acid MOF on carbon and subsequent pyrolysis.

Control of coordinatively unsaturated Zr sites in ZrO for efficient C-H bond activation.

Due to the complexity of heterogeneous catalysts, identification of active sites and the ways for their experimental design are not inherently straightforward but important for tailored catalyst preparation. The present study reveals the active sites for efficient C-H bond activation in C-C alkanes over ZrO free of any metals or metal oxides usually catalysing this reaction. Quantum chemical calculations suggest that two Zr cations located at an oxygen vacancy are responsible for the homolytic C-H bond dissociation.

Intermetallic nickel silicide nanocatalyst-A non-noble metal-based general hydrogenation catalyst.

Hydrogenation reactions are essential processes in the chemical industry, giving access to a variety of valuable compounds including fine chemicals, agrochemicals, and pharmachemicals. On an industrial scale, hydrogenations are typically performed with precious metal catalysts or with base metal catalysts, such as Raney nickel, which requires special handling due to its pyrophoric nature. We report a stable and highly active intermetallic nickel silicide catalyst that can be used for hydrogenations of a wide range of unsaturated compounds.

A Stable Nanocobalt Catalyst with Highly Dispersed CoN Active Sites for the Selective Dehydrogenation of Formic Acid.

Novel nanostructured catalysts with highly dispersed cobalt have been synthesized by the pyrolysis of metal phenanthroline complexes. Materials with significantly different properties were obtained by simply tuning the metal/ligand ratio. The catalytic potential of this class of compounds is shown by the first example of the dehydrogenation of formic acid under the catalysis of atomically dispersed cobalt.

MOF-derived cobalt nanoparticles catalyze a general synthesis of amines.

The development of base metal catalysts for the synthesis of pharmaceutically relevant compounds remains an important goal of chemical research. Here, we report that cobalt nanoparticles encapsulated by a graphitic shell are broadly effective reductive amination catalysts. Their convenient and practical preparation entailed template assembly of cobalt-diamine-dicarboxylic acid metal organic frameworks on carbon and subsequent pyrolysis under inert atmosphere.

Synthesis of Single Atom Based Heterogeneous Platinum Catalysts: High Selectivity and Activity for Hydrosilylation Reactions.

Catalytic hydrosilylation represents a straightforward and atom-efficient methodology for the creation of C-Si bonds. In general, the application of homogeneous platinum complexes prevails in industry and academia. Herein, we describe the first heterogeneous single atom catalysts (SACs), which are conveniently prepared by decorating alumina nanorods with platinum atoms.

A Biomass-Derived Non-Noble Cobalt Catalyst for Selective Hydrodehalogenation of Alkyl and (Hetero)Aryl Halides.

Hydrodehalogenation is a straightforward approach for detoxifications of harmful anthropogenic organohalide-based pollutants, as well as removal of halide protecting groups used in multistep syntheses. A novel sustainable catalytic material was prepared from biowaste (chitosan) in combination with an earth-abundant cobalt salt. The heterogeneous catalyst was fully characterized by transmission electron microscope, X-ray diffraction, and X-ray photoelectron spectroscopy measurements, and successfully applied to hydrodehalogenation of alkyl and (hetero)aryl halides with broad scope (>40 examples) and excellent chemoselectivity using molecular hydrogen as a reductant.

Engineering titania nanostructure to tune and improve its photocatalytic activity.

Photocatalytic pathways could prove crucial to the sustainable production of fuels and chemicals required for a carbon-neutral society. Electron-hole recombination is a critical problem that has, so far, limited the efficiency of the most promising photocatalytic materials. Here, we show the efficacy of anisotropy in improving charge separation and thereby boosting the activity of a titania (TiO2) photocatalytic system.

New Insights into the Nature of Co-components and Their Impact on Pd Structure: X-ray Absorption Studies on Toluene Acetoxylation Catalysts.

Co-components are a powerful tool to tune the performance of catalysts, but their nature and their impact on the catalysts is often controversially discussed. In this study X-ray absorption spectroscopy (XAS) was employed to elucidate the nature of co-components and their impact on the catalytic reaction. In anatase-supported Pd-based catalysts for the gas-phase acetoxylation of toluene, less noble co-components (e.

Morphological impact on the reaction kinetics of size-selected cobalt oxide nanoparticles.

Apart from large surface areas, low activation energies are essential for efficient reactions, particularly in heterogeneous catalysis. Here, we show that not only the size of nanoparticles but also their detailed morphology can crucially affect reaction kinetics, as demonstrated for mass-selected, soft-landed, and oxidized cobalt clusters in a 6 nm to 18 nm size range. The method of reflection high-energy electron diffraction is extended to the quantitative determination of particle activation energies which is applied for repeated oxidation and reduction cycles at the same particles.

Selective Catalytic Hydrogenation of Heteroarenes with N-Graphene-Modified Cobalt Nanoparticles (Co3O4-Co/NGr@α-Al2O3).

Cobalt oxide/cobalt-based nanoparticles featuring a core-shell structure and nitrogen-doped graphene layers on alumina are obtained by pyrolysis of Co(OAc)2/phenanthroline. The resulting core-shell material (Co3O4-Co/NGr@α-Al2O3) was successfully applied in the catalytic hydrogenation of a variety of N-heteroarenes including quinolines, acridines, benzo[h], and 1,5-naphthyridine as well as unprotected indoles. The peculiar structure of the novel heterogeneous catalyst enables activation of molecular hydrogen at comparably low temperature.

Design of BODIPY Dyes as Photosensitisers in Multicomponent Catalyst Systems for Light-Driven Hydrogen Production.

A study of visible-light-driven hydrogen production using a multicomponent system consisting of different boron dipyrromethene (BODIPY) dyes, triethylamine and [{Pd(PPh3)Cl2}2] from THF/water mixtures is presented. A trio of meso-mesityl BODIPY dyes display the best activities and long-term stabilities of more than ten days with the 2,6-diiodo derivative showing the best performance.

Pronounced Size Dependence in Structure and Morphology of Gas-Phase Produced, Partially Oxidized Cobalt Nanoparticles under Catalytic Reaction Conditions.

It is generally accepted that optimal particle sizes are key for efficient nanocatalysis. Much less attention is paid to the role of morphology and atomic arrangement during catalytic reactions. Here, we unravel the structural, stoichiometric, and morphological evolution of gas-phase produced and partially oxidized cobalt nanoparticles in a broad size range.

Cobalt-based nanocatalysts for green oxidation and hydrogenation processes.

This protocol describes the preparation of cobalt-based nanocatalysts and their applications in environmentally benign redox processes for fine chemical synthesis. The catalytically active material consists of nanoscale Co3O4 particles surrounded by nitrogen-doped graphene layers (NGrs), which have been prepared by pyrolysis of phenanthroline-ligated cobalt acetate on carbon. The resulting materials have been found to be excellent catalysts for the activation of both molecular oxygen and hydrogen; in all tested reactions, water was the only by-product.

Iron-catalyzed synthesis of secondary amines: on the way to green reductive aminations.

Amines represent important intermediates in chemical and biological processes. Herein, we describe the use of a nanostructured iron-based catalyst for the tandem reductive amination between nitroarenes and aldehydes using hydrogen as reductant. The nanostructured iron-catalyst is prepared by immobilization of an iron-phenanthroline complex onto a commercially available carbon support.

Convenient and mild epoxidation of alkenes using heterogeneous cobalt oxide catalysts.

A general epoxidation of aromatic and aliphatic olefins has been developed under mild conditions using heterogeneous Cox Oy -N/C (x=1,3; y=1,4) catalysts and tert-butyl hydroperoxide as the terminal oxidant. Various stilbenes and aliphatic alkenes, including renewable olefins, and vitamin and cholesterol derivatives, were successfully transformed into the corresponding epoxides with high selectivity and often good yields. The cobalt oxide catalyst can be recycled up to five times without significant loss of activity or change in structure.

Low-temperature oxidation of carbon monoxide with gold(III) ions supported on titanium oxide.

Au/TiO2 catalysts prepared by a deposition-precipitation process and used for CO oxidation without previous calcination exhibited high, largely temperature-independent conversions at low temperatures, with apparent activation energies of about zero. Thermal treatments, such as He at 623 K, changed the conversion-temperature characteristics to the well-known S-shape, with activation energies slightly below 30 kJ mol(-1). Sample characterization by XAFS and electron microscopy and a low-temperature IR study of CO adsorption and oxidation showed that CO can be oxidized by gas-phase O2 at 90 K already over the freeze-dried catalyst in the initial state that contained Au exclusively in the +3 oxidation state.

Nanoscale Fe2O3-based catalysts for selective hydrogenation of nitroarenes to anilines.

Production of anilines--key intermediates for the fine chemical, agrochemical, and pharmaceutical industries--relies on precious metal catalysts that selectively hydrogenate aryl nitro groups in the presence of other easily reducible functionalities. Herein, we report convenient and stable iron oxide (Fe2O3)-based catalysts as a more earth-abundant alternative for this transformation. Pyrolysis of iron-phenanthroline complexes on carbon furnishes a unique structure in which the active Fe2O3 particles are surrounded by a nitrogen-doped carbon layer.

Heterogenized cobalt oxide catalysts for nitroarene reduction by pyrolysis of molecularly defined complexes.

Molecularly well-defined homogeneous catalysts are known for a wide variety of chemical transformations. The effect of small changes in molecular structure can be studied in detail and used to optimize many processes. However, many industrial processes require heterogeneous catalysts because of their stability, ease of separation and recyclability, but these are more difficult to control on a molecular level.

Selective oxidation of alcohols to esters using heterogeneous Co3O4-N@C catalysts under mild conditions.

Novel cobalt-based heterogeneous catalysts have been developed for the direct oxidative esterification of alcohols using molecular oxygen as benign oxidant. Pyrolysis of nitrogen-ligated cobalt(II) acetate supported on commercial carbon transforms typical homogeneous complexes to highly active and selective heterogeneous Co3O4-N@C materials. By applying these catalysts in the presence of oxygen, the cross and self-esterification of alcohols to esters proceeds in good to excellent yields.

Investigation and enhancement of the stability and performance of water reduction systems based on cyclometalated iridium(III) complexes.

Water reduction systems that use a bis-cyclometalated Ir(III) photosensitiser (PS) along with homogeneous Pd complexes as a source of in-situ-formed colloidal Pd as the water reducing complex (WRC) and triethylamine (TEA) as the sacrificial electron donor were tested and characterised with respect to their photocatalytic H(2) production performance. It was confirmed that substitution of the 2-(pyridin-2-yl)benzen-1-ide (pyb) ligand in the well-known system [Ir(pyb)(2)(bpy)](+) (bpy=2,2'-bipyridine) by the fluorinated cyclometalating ligand 5-fluoro-2-(5-methylpyridin-2-yl)benzen-1-ide (Fmpyb) tremendously enhanced the H(2) production rate. Moreover, variation of the bidentate N^N ligand bpy by alkyl substitution in the 4,4'-position resulted in an increase in the H(2) production yield by a factor of three.

Water oxidation with molecularly defined iridium complexes: insights into homogeneous versus heterogeneous catalysis.

Molecularly defined Ir complexes and different samples of supported IrO(2) nanoparticles have been tested and compared in the catalytic water oxidation with cerium ammonium nitrate (CAN) as the oxidant. By comparing the activity of nano-scaled supported IrO(2) particles to the one of organometallic complexes it is shown that the overall activity of the homogeneous Ir precursors is defined by both the formation of the homogeneous active species and its conversion to Ir(IV)-oxo nanoparticles. In the first phase of the reaction the activity is dominated by the homogeneous active species.

Hydrogen evolution from water/alcohol mixtures: effective in situ generation of an active Au/TiO2 catalyst.

Gold standard: Au/TiO(2) catalysts, easily prepared in situ from different Au precursors and TiO(2), generate hydrogen from water/alcohol mixtures. Different alcohols, and even glucose, can serve as sacrificial reductants. The best system produces hydrogen on a liter scale, and is stable for more than two days.

Efficient and highly selective iron-catalyzed reduction of nitroarenes.

Pyrolysis of iron-phenanthroline complexes supported on carbon leads to highly selective catalysts for the reduction of structurally diverse nitroarenes to anilines in 90-99% yields. Excellent chemoselectivity for the nitro group reduction is demonstrated.