Analytical applications of droplet deposition Raman spectroscopy.

The droplet deposition methods in Raman spectroscopy have received considerable attention in the field of analytical sensing focusing on effective pre-concentration of the studied analyte (coffee-ring effect or small spots). This review covers different analytical applications of drop-coating deposition Raman scattering (DCDRS) and droplet deposition surface-enhanced Raman scattering (SERS) spectroscopy. Two main advantages of droplet deposition Raman techniques are considered: the drying-induced segregation of the components from the mixtures (such as body fluids) and the sensitivity of detection of various analytically important molecules.

Toward a New Era of SERS and TERS at the Nanometer Scale: From Fundamentals to Innovative Applications.

Surface-enhanced Raman scattering (SERS) and tip-enhanced Raman scattering (TERS) have opened a variety of exciting research fields. However, although a vast number of applications have been proposed since the two techniques were first reported, none has been applied to real practical use. This calls for an update in the recent fundamental and application studies of SERS and TERS.

Drop coating deposition Raman (DCDR) spectroscopy of contaminants.

Raman spectroscopy is a useful technique to identify small organic molecules, including contaminants. The drop coating deposition Raman (DCDR) is more sensitive than conventional Raman spectroscopy from solution. It is based on Raman measurement from a small drop dried on a hydrophobic surface where studied molecules are preconcentrated.

Magnetron-sputtered Polytetrafluoroethylene-stabilized Silver Nanoisland Surface for Surface-Enhanced Fluorescence.

Surface-enhanced fluorescence (SEF) requires the absorption/emission band of the fluorophore, the localized surface plasmon resonance (LSPR) of the nanostructure and the excitation wavelength to fall in the same (or very close) spectral range. In this paper, we monitor the SEF intensity and lifetime dependence of riboflavin (vitamin B2) adsorbed on a spacer-modified Ag substrate with respect to the thickness of the spacer. The substrates were formed by silver nanoislands deposited onto magnetron-sputtered polytetrafluoroethylene (ms-PTFE).

Gold Film over SiO Nanospheres-New Thermally Resistant Substrates for Surface-Enhanced Raman Scattering (SERS) Spectroscopy.

Surface-enhanced Raman scattering (SERS) sensors are constructed from metallic plasmonic nanostructures providing high sensitivity and spectral reproducibility. In many cases, irradiation of the SERS substrate by the laser beam leads to an increase of the local temperature and consequently to thermal degradation of metallic nanostructure itself and/or adsorbed analyte. We report here a "bottom-up" technique to fabricate new thermally resistant gold "film over nanosphere" (FON) substrates for SERS.

Towards Reliable and Quantitative Surface-Enhanced Raman Scattering (SERS): From Key Parameters to Good Analytical Practice.

Experimental results obtained in different laboratories world-wide by researchers using surface-enhanced Raman scattering (SERS) can differ significantly. We, an international team of scientists with long-standing expertise in SERS, address this issue from our perspective by presenting considerations on reliable and quantitative SERS. The central idea of this joint effort is to highlight key parameters and pitfalls that are often encountered in the literature.

Polarization- and Angular-Resolved Optical Response of Molecules on Anisotropic Plasmonic Nanostructures.

A sometimes overlooked degree of freedom in the design of many spectroscopic (mainly Raman) experiments involve the choice of experimental geometry and polarization arrangement used. Although these aspects usually play a rather minor role, their neglect may result in a misinterpretation of the experimental results. It is well known that polarization- and/or angular- resolved spectroscopic experiments allow one to classify the symmetry of the vibrations involved or the molecular orientation with respect to a smooth surface.

Surface-enhanced Raman scattering (SERS) of riboflavin on nanostructured Ag surfaces: The role of excitation wavelength, plasmon resonance and molecular resonance.

Optimization of surface-enhanced Raman scattering (SERS)-based sensors for (bio)analytical applications has received much attention in recent years. For optimum sensitivity, both the nanostructure fabrication process and the choice of the excitation wavelength used with respect to the specific analyte studied are of crucial importance. In this contribution, detailed SERS intensity profiles were measured using gradient nanostructures with the localized surface-plasmon resonance (LSPR) condition varying across the sample length and using riboflavin as the model biomolecule.

Anisotropic Optical Response of Silver Nanorod Arrays: Surface Enhanced Raman Scattering Polarization and Angular Dependences Confronted with Ellipsometric Parameters.

Silver nanorod arrays prepared by oblique angle deposition (AgOADs) represent versatile, simple and inexpensive substrates for high sensitivity surface enhanced Raman scattering (SERS) applications. Their anisotropic nature suggests that their optical responses such as the SERS signal, the depolarization ratio, reflectivity and ellipsometric parameters critically depend on the states of polarization, nanorod angular arrangement and specific illumination-observation geometry. SERS polarization and angular dependences of AgOADs were measured using methylene blue (MB) molecule.

Drop coating deposition of a liposome suspension on surfaces with different wettabilities: "coffee ring" formation and suspension preconcentration.

Evaporation of a drop of biomolecular solution on a solid surface typically creates a ring-shaped drying pattern, formed by the so-called "coffee ring" effect. The size and shape of the "coffee ring" pattern is strongly dependent on the properties of the surface as well as on the deposited molecular solution or suspension. In this paper, we tested six types of surfaces differing in their physico-chemical surface characteristics (contact angles, wettability and roughness) as well as in the presence or absence of a base metal layer.

Testing gold nanostructures fabricated by hole-mask colloidal lithography as potential substrates for SERS sensors: sensitivity, signal variability, and the aspect of adsorbate deposition.

Gold nanoplasmonic substrates with high sensitivity and spectral reproducibility are key components of molecular sensors based on surface-enhanced Raman scattering (SERS). In this work, we used a confocal Raman microscope and several types of gold nanostructures (arrays of nanodiscs, nanocones and nanodisc dimers) prepared by hole-mask colloidal lithography (HCL) to determine the sources of variability in SERS measurements. We demonstrate that significant variations in the SERS signal can originate from the method of deposition of analyte molecules onto a SERS substrate.

Drop-Coating Deposition Raman (DCDR) Spectroscopy as a Tool for Membrane Interaction Studies: Liposome-Porphyrin Complex.

Drop-coating deposition Raman (DCDR) spectroscopy is based on the measurement of a sample that has been preconcentrated by being dried on a special hydrophobic plate. In addition to its higher sensitivity, the advantage of DCDR over the conventional Raman spectroscopy is the small sample volume needed, the lack of interference from solvents, and the capability of segregating any impurities present and separating components in more complex samples. In this study, DCDR spectroscopy was employed to investigate the complex of the cationic copper(II) 5,10,15,20-tetrakis(1-methyl-4-pyridyl) porphyrin (CuTMPyP) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) liposomes.

Quantitative SERS analysis of azorubine (E 122) in sweet drinks.

Considering both the potential effects on human health and the need for knowledge of food composition, quantitative detection of synthetic dyes in foodstuffs and beverages is an important issue. For the first time, we report a fast quantitative analysis of the food and drink colorant azorubine (E 122) in different types of beverages using surface-enhanced Raman scattering (SERS) without any sample preparation. Seven commercially available sweet drinks (including two negative controls) with high levels of complexity (sugar/artificial sweetener, ethanol content, etc.

Drop coating deposition Raman spectroscopy of liposomes: role of cholesterol.

Drop coating deposition Raman (DCDR) spectroscopy was used to study liposomes (DPPC and asolectin) with growing proportion of cholesterol. Deposited samples of both liposomes on special hydrophobic surface formed a dried drop with a circular shape with a ring of concentrated liposomes at the outer edge. The presence of cholesterol in liposome causes a diminishing of the drop size and an increasing in diameter of the ring, but DPPC with 20% of cholesterol forms the compact drop without the ring.

Colloidal systems of silver nanoparticles and high-regioregular cationic polythiophene with ionic-liquid-like pendant groups: Optical properties and SERS.

We report tuning of structure dependent optical properties of colloidal systems of borate-stabilized silver nanoparticles (Ag NPs) and polythiophene-based cationic polyelectrolyte with ionic-liquid like side groups: poly{3-[6-(1-methylimidazolium-3-yl)hexyl]thiophene-2,5-diyl bromide} (PMHT-Br) towards obtaining local electromagnetic field enhancement effects. Surface-enhanced Raman scattering (SERS) studies showed that the strong electromagnetic field enhancement is related to the formation of aggregates of Ag NPs achieved at the components ratio providing the charge balance between Ag NPs and cationic polythiophene, at which Ag NPs are nearly single-polymer-layer coated, their zeta potential is close to zero and they easily form aggregates in which the mean inter-particle distance enables the occurrence of desired plasmonic effects. Fluorescence quenching is efficient only in the systems with low concentrations of PMHT-Br, in which almost all polymer chains directly interact with the Ag NPs surface.

Morphology and optical responses of SERS active pi-conjugated poly(N-ethyl-2-ethynylpyridinium iodide)/Ag nanocomposite systems.

The influence of the poly(N-ethyl-2-ethynylpyridinium iodide) (PEEP-I) concentration on the morphology and optical properties of nanocomposite systems prepared by mixing the polymer solution with a hydrosol of ca. 9 nm Ag nanoparticles (NPs) was investigated by a combination of surface plasmon extinction (SPE) measurements, transmission electron microscope (TEM) imaging and surface-enhanced Raman spectroscopy (SERS). The PEEP-I concentration was found to have a strong impact on the assembly of Ag NPs and, consequently, on the optical responses of the composite systems.

Surface-enhanced resonance Raman scattering of porphyrins on gold nanoparticles attached to silanized glass plates.

Surface-enhanced resonance Raman scattering (SERRS) spectra of cationic 5,10,15,20-tetrakis(1-methyl-4-pyridyl) porphyrin (TMPyP) and anionic 5,10,15,20-tetrakis(4-sulfonatophenyl) porphyrin (TSPP) were measured from gold surfaces prepared by attaching citrate-reduced colloidal nanoparticles to glass slides silanized by 3-aminopropyltrimethoxysilane. SERRS spectra of both porphyrins obtained in a large concentration range (1 x 10(-4) to 1 x 10(-7)M) of primary solution do not show any sign of porphyrin metalation or perturbation of its native structure. Optimal adsorption time (15-20 min) and covering concentration limit (lower than 1 x 10(-5)M) of porphyrins have been estimated from the concentration and soaking time dependences of SERRS spectra.

Probing of porphyrin surface chemistry in systems with laser-ablated Ag nanoparticle hydrosol: role of thiosulfate anions.

The influence of sodium thiosulfate (THS) concentration in Ag colloid/THS/H(2)TMPyP and Ag colloid/H2TMPyP/THS systems (H2TMPyP = 5,10,15,20-tetrakis(1-methyl-4-pyridyl)porphyrin) was investigated by a combination of surface-enhanced resonance Raman scattering (SERRS) spectroscopy, surface plasmon extinction (SPE) measurements, and transmission electron microscopy (TEM). THS was found to have a strong impact on Ag nanoparticle surface structure and aggregation state and on interaction with H2TMPyP probe molecules, as evidenced by variations of the SERRS spectrum. In the Ag colloid/THS/H2TMPyP system, when laser-ablated Ag colloid was THS pretreated prior to the porphyrin addition, a critical threshold THS concentration (4 x 10(-5) M) was discovered.

Interaction of phospholipid dispersions with water-soluble porphyrins as monitored by their Raman temperature profiles.

Raman scattering spectra of 1,2-dipalmitoyl-sn-glycero-3-phospho-rac-(1-glycerol) (DPPG) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) dispersions, mixed with water-soluble porphyrins, i.e. cationic copper(II)-5,10,15,12-tetrakis(4-N-methylpyridyl) and anionic silver(II)-5,10,15,20-tetrakis(4-carboxyphenyl)porphyrins, were measured in the 2800-3100 cm(-1) C-H stretching vibration region as a function of the temperature within the 5-55 degrees C range.