The millipede family Striariidae Bollman, 1893. IX. The identity of Striaria californica Cook, 1899, and the new genus Bayaria for Striaria nana Loomis, 1936, with a key to genera and an annotated checklist of the Striariidae (Diplopoda, Chordeumatida, Striarioidea).

The identity of Striaria californica Cook, described in 1899 from a single female, is established on the basis of additional specimens collected by Cook in 1929 and determined to be that species by Loomis (1936) as well as specimens from the San Francisco Bay region, likely to be from near the original collection locality. We propose Amplaria californica (Cook, 1899) new combination. A new genus, Bayaria Shear & Marek n.

Left-right tympanal size asymmetry in the parasitoid fly .

is a parasitoid fly notable for its impressive hearing abilities relative to its small size. Here, we use it as a model organism to investigate if minor size differences in paired sensory organs may be beneficial or neutral to an organism's perception abilities. We took high-resolution images of tympanal organs from 21 specimens and found a statistically significant surface area asymmetry (up to 6.

Improving the Impact of BODY-Q Scores Through Minimal Important Differences in Body Contouring Surgery: An International Prospective Cohort Study.

Background: The BODY-Q is a widely used patient-reported outcome measure for comprehensive assessment of treatment outcomes specific to patients undergoing body contouring surgery (BCS). However, for the BODY-Q to be meaningfully interpreted and used in clinical practice, minimal important difference (MID) scores are needed. A MID is defined as the smallest change in outcome measure score that patients perceive as important.

The Chemistry of the Defensive Secretions of Three Species of Millipedes in the Genus Brachycybe.

Millipedes have long been known to produce a diverse array of chemical defense agents that deter predation. These compounds, or their precursors, are stored in high concentration within glands (ozadenes) and are released upon disturbance. The subterclass Colobognatha contains four orders of millipedes, all of which are known to produce terpenoid alkaloids-spare the Siphonophorida that produce terpenes.

Polish Translation and Linguistic Validation of the SCAR-Q.

Introduction Patient-reported outcome measurements (PROMs) are gaining considerable popularity as tools to assess the effectiveness of the treatment in plastic surgery, being a complement to surgical outcomes. The SCAR-Q questionnaire has been recently developed for patients with surgical, traumatic, and burn scars. Aim The study aims to describe the process of translation and linguistic validation of the scar questionnaire (SCAR-Q) for use in Polish patients undergoing scar treatment.

Body Contouring Surgery After Bariatric Surgery Improves Long-Term Health-Related Quality of Life and Satisfaction With Appearance: An International Longitudinal Cohort Study Using the BODY-Q.

Objective: To examine health-related quality of life (HRQL) and satisfaction with appearance in patients who have undergone bariatric surgery (BS) with or without subsequent body contouring surgery (BCS) in relation to the general population normative for the BODY-Q.

Background: The long-term impact of BS with or without BCS has not been established using rigorously developed and validated patient-reported outcome measures. The BODY-Q is a patient-reported outcome measure developed to measure changes in HRQL and satisfaction with appearance in patients with BS and BCS.

Health-Related Quality-of-Life Effects of Rectus Repair during Body Contouring Surgery in Postbariatric Patients: A Prospective Study.

Background: Massive weight loss after bariatric surgery often leads to psychological and physical dissatisfaction, resulting in an increased demand for body contouring surgery (BCS). As a result of these operations, health-related quality of life (HRQL) is improved. However, little is known about the impact of rectus plication during BCS on HRQL.

The millipede family Striariidae Bollman, 1893. VIII. Three new genera and four new species of minute millipedes from Oregon and Washington, USA(Diplopoda, Chordeumatida, Striarioidea).

We describe three new genera and four new species of small, litter-dwelling millipedes from the states of Oregon and Washington, USA: Miniaria ramifera, n. gen., n.

A new species of from southern California (Siphonophorida, Siphonorhinidae).

The millipede fauna inhabiting deep soil are poorly known. They are small and threadlike, slow moving, lacking pigmentation, and rarely encountered due to their obscure underground way of life. One family, the Siphonorhinidae, encompasses four genera and 12 species in a fragmentary distribution in California, southern Africa, Madagascar, the Malay Archipelago, and Indo-Burma.

The millipede family Striariidae Bollman, 1893. VI. Six new genera and thirteen new species from western North America (Diplopoda, Chordeumatida, Striarioidea).

The following new genera and species of Striariidae are described from the states of California, Oregon and Washington: Nototrisaria ornata n. gen., n.

The millipede family Striariidae Bollman, 1893. VII. Petra sierwaldae, n. gen., n. sp., a minute millipede from Idaho, USA (Diplopoda, Chordeumatida, Striariidae).

Petra sierwaldae, n. gen., n.

Reconsidering tympanal-acoustic interactions leads to an improved model of auditory acuity in a parasitoid fly.

Although most binaural organisms locate sound sources using neurological structures to amplify the sounds they hear, some animals use mechanically coupled hearing organs instead. One of these animals, the parasitoid fly(), has astoundingly accurate sound localization abilities. It can locate objects in the azimuthal plane with a precision of 2°, equal to that of humans, despite an intertympanal distance of only 0.

Phylogenetic review of the millipede genus Chamberlin, 1949 (Polydesmida, Xystodesmidae).

The millipede genus Chamberlin, 1949 is a monospecific taxon, with the type species (Bollman, 1889). The last revision of the genus was made by Hoffman (1960) where he established three subspecies. Here we used molecular phylogenetics to assess the genus and evaluate whether it is a monophyletic group, and if the subspecies are each monophyletic.

Myriapods.

Paul Marek and William Shear introduce the arthropod sub-phylum myriapoda, which includes centipedes, millipedes and other multi-legged animals.

A revision of the species group in the millipede genus Chamberlin, 1918 (Diplopoda, Polydesmida, Xystodesmidae).

Although many new species of the millipede genus Chamberlin, 1918 have been known from museum collections for over half a century, a systematic revision has not been undertaken until recently. There are two species groups in the genus: the species group and the species group. In this study, the species group was investigated.

Electrochemical modulation enhances the selectivity of peripheral neurostimulation in vivo.

Electrical nerve stimulation serves an expanding list of clinical applications, but it faces persistent challenges in selectively activating bundled nerve fibers. In this study, we investigated electrochemical modulation with an ion-selective membrane (ISM) and whether it, used together with electrical stimulation, may provide an approach for selective control of peripheral nerves. Guided by theoretical transport modeling and direct concentration measurements, we developed an implantable, multimodal ISM cuff capable of simultaneous electrical stimulation and focused Ca2+ depletion.

The milliped family Striariidae Bollman, 1893. V. Stegostriaria dulcidormus, n. gen., n. sp., Kentrostriaria ohara, n. gen., n. sp., and the convergent evolution of exaggerated metazonital crests (Diplopoda, Chordeumatida, Striarioidea).

Two new genera and species, Stegostriaria dulcidormus (Trisariinae) and Kentrostriaria ohara (Striariinae), are described from Oregon and Idaho, respectively. The new species are distinct from any other striariids, and indeed from any other chordeumatidan millipedes, in having the second dorsal crests greatly enlarged, giving them a fanciful resemblance to stegosaurid dinosaurs. In spite of this similarity, the two species are so distinct they cannot be accommodated in the same genus or the same subfamily.

The millipede family Striariidae Bollman, 1893. IV. Amplaria oedipus, n. sp., with a secondary sexual modification of males unique among millipedes (Diplopoda, Chordeumatida, Striarioidea).

A new species, Amplaria oedipus, is described from Oregon, USA. Males of the new species have greatly inflated pyriform tarsi on the 5th and 6th legpairs, which is a secondary sexual modification previously not known from any other millipede.

Deoxybuzonamine Isomers from the Millipede (Platydesmida: Andrognathidae).

Millipedes (Diplopoda) are well known for their toxic or repellent defensive secretions. Here, we describe (6a,10a,10b)-8,8-dimethyldodecahydropyrrolo[2,1-]isoquinoline [deoxybuzonamine ()] and (-6a,10a,10b)-8,8-dimethyldodecahydropyrrolo[2,1-]isoquinoline [deoxybuzonamine ()], two isomers of deoxybuzonamine found in the chemical defense secretions of the millipede Wood (Colobognatha, Platydesmida, Andrognathidae). The carbon-nitrogen skeleton of these compounds was determined from their MS and GC-FTIR spectra obtained from the MeOH extract of whole millipedes, along with a subsequent selective synthesis.

Impact of COVID-19 pandemic on plastic surgery training in Europe.

Background: The COVID-19 pandemic has disrupted the functioning of global society and healthcare systems, including surgical departments. We aimed to assess alterations in plastic surgery training in Europe during the COVID-19 pandemic.

Methods: A 34-question survey was emailed in January and February 2021 to 54 National Associations of Plastic, Reconstructive, and Aesthetic Surgeons throughout European countries.

The first true millipede-1306 legs long.

The name "millipede" translates to a thousand feet (from mille "thousand" and pes "foot"). However, no millipede has ever been described with more than 750 legs. We discovered a new record-setting species of millipede with 1,306 legs, Eumillipes persephone, from Western Australia.

Three new genera and eighteen new species of miniature polydesmid millipedes from the northwestern United States (Diplopoda, Polydesmida, Polydesmidae).

Three new genera, Retrorsioides, Rowlandesmus and Benedictesmus, are described and the polydesmid millipede fauna of North America is briefly reviewed with an emphasis on the genera Bidentogon Buckett Gardner, 1968 and Retrorsia Shelley, 2003. Eighteen new species are described: Bidentogon buttensis, Bidentogon norcal, Retrorsia leonardi, Retrorsia benedictae, Retrorsia richarti, Retrorsia gracilis, Retrorsia simplicissima, Retrorsioides castellum, Retrorsioides linnensis, Retrorsioides kittitas, Retrorsioides bammerti, Retrorsioides arboramagna, Rowlandesmus millicoma, Rowlandesmus dentogonopus, Benedictesmus aureua, Benedictesmus ellenae, Benedictesmus yaquina and Benedictesmus timber. Natural history notes and illustrations are provided of putative commensal fungi, nematodes and a mite found on the millipede specimens.

A revision of the species group in the millipede genus Chamberlin, 1918 (Diplopoda, Polydesmida, Xystodesmidae).

Millipedes in the family Xystodesmidae (Polydesmida) are often referred to as "colorful, flat-backed millipedes" for their bright aposematic coloration and tendency to form Müllerian mimicry rings in the Appalachian region. However, there are many species of Xystodesmidae that do not display colorful warning patterns, and instead have more cryptic appearances. Perhaps for this reason, groups such as the genus have remained understudied, despite containing a large number of undescribed species.

Rapid and Low Cost Manufacturing of Cuff Electrodes.

For many peripheral neuro-modulation applications, the cuff electrode has become a preferred technology for delivering electrical current into targeted volumes of tissue. While basic cuffs with low spatial selectivity, having longitudinally arranged contacts, can be produced from relatively straightforward processes, the fabrication of more complex electrode configurations typically requires iterative design and clean-room fabrication with skilled technicians. Although facile methods for fabricating cuff electrodes exist, their inconsistent products have limited their adoption for rapid manufacturing.