Manganese-enriched CsPbCl perovskite nanocrystals for self-assembled supercrystals.

The self-assembly of CsPbCl perovskite nanocrystals and their Mn-enriched analogs into supercrystals is reported. Increasing Mn content in the nanocrystals leads to formation of larger, increasingly uniform cubic supercrystals that eventually become rod-like with higher photoluminescence quantum yields.

Charge separation in a copper(I) donor-chromophore-acceptor assembly for both photoanode and photocathode sensitization.

A copper(I) donor-chromophore-acceptor triad bearing 1,8-napthalenemonoimide as the electron acceptor and triphenylamine as the electron donor was synthesized. Photophysical and electrochemical characterization suggest stepwise photoinduced charge separation upon excitation of the copper(I)-based metal-to-ligand charge transfer (MLCT) transition. Analyses of femtosecond transient absorption data of the triad show that intersystem crossing from the MLCT to the MLCT state is followed by two electron-transfer steps with time constants of 20 ps and 722 ps yielding a presumed final charge-separated state with a radical cation on the donor and radical anion on the acceptor that has an 18 ns lifetime in acetonitrile.

Molecular Copper(I)-Sensitized Photoanodes for Alcohol Oxidation under Ambient Conditions.

Dye-sensitized photoelectrochemical cells can enable the production of molecules currently accessible through energetically demanding syntheses. Copper(I)-based dyes represent electronically tunable charge transfer and separation systems. Herein, we report a Cu(I)-bisdiimine donor-chromophore-acceptor dye with an absorbance in the visible part of the solar spectrum composed of a phenothiazine electron donor, and dipyrido[3,2-a:2',3'-c]phenazine electron acceptor.

A Modular and Catalytic Methodology To Access 2,5-Furan-Based Phenylene/Thiophene Oligomers through a One-Pot Decarboxylative Cross-Coupling from 5-Bromofurfural.

A library of 2,5-furan-based phenylene/thiophene oligomers were synthesized starting from 5-bromofurfural, a derivative of biomass-derived furfural. Varied electronic groups are coupled onto the furan motif, followed by the installation of a phenylene or thiophene central linker through a one-pot Pd-catalyzed decarboxylative cross-coupling reaction. Resulting oligomers containing the furan-phenylene-furan core possess high photoluminescent quantum yields in solution (83-98%), which are crucial for optoelectronic devices.

Long live(d) CsPbBr superlattices: colloidal atomic layer deposition for structural stability.

Superlattice formation afforded by metal halide perovskite nanocrystals has been a phenomenon of interest due to the high structural order induced in these self-assemblies, an order that is influenced by the surface chemistry and particle morphology of the starting building block material. In this work, we report on the formation of superlattices from aluminum oxide shelled CsPbBr perovskite nanocrystals where the oxide shell is grown by colloidal atomic layer deposition. We demonstrate that the structural stability of these superlattices is preserved over 25 days in an inert atmosphere and that colloidal atomic layer deposition on colloidal perovskite nanocrystals yields structural protection and an enhancement in photoluminescence quantum yields and radiative lifetimes as opposed to gas phase atomic layer deposition on pre-assembled superlattices or excess capping group addition.

Effects of increasing ligand conjugation in Cu(I) photosensitizers on NiO semiconductor surfaces.

Dye-sensitized photoelectrodes may be used as heterogeneous components for fuel-forming reactions in photoelectrochemical cells. There has been increasing interest in developing Earth-abundant cheaper photosensitizers based on first-row transition metals. We describe here the synthesis, characterization, and study of the ground and excited state properties of three Cu(I) complexes bearing ligands with varying electron-accepting capacities and conjugation that may act as photosensitizers for wide bandgap semiconductors.

Photonic enhancement in photoluminescent metal halide perovskite-photonic crystal bead hybrids.

We report two photonic crystal-perovskite nanocrystal microbead hybrids with photoluminescence matching that of the parent nanocrystals but with increased photoluminescence quantum yields. Time-resolved photoluminescence spectroscopy quantifies the radiative enhancement afforded by the photonic environment of the microbeads. The reported hybrids also demonstrate markedly better resistance to degradation in water over 30 days of immersion.

Binary CuS Templates Direct the Formation of Quaternary CuZnSnS (Kesterite, Wurtzite) Nanocrystals.

Kesterite CuZnSnS (k-CZTS) nanocrystals have received attention for their tunable optoelectronic properties, as well as the earth abundance of their constituent atoms. However, the phase-pure synthesis of these quaternary NCs is challenging due to their polymorphism, as well as the undesired formation of related binary and ternary impurities. A general synthetic route to tackle this complexity is to pass through intermediate template nanocrystals that direct subsequent cation exchange toward the desired quaternary crystalline phase, particularly those that are thermodynamically disfavored or otherwise synthetically challenging.

A historical perspective on porphyrin-based metal-organic frameworks and their applications.

Porphyrins are important molecules widely found in nature in the form of enzyme active sites and visible light absorption units. Recent interest in using these functional molecules as building blocks for the construction of metal-organic frameworks (MOFs) have rapidly increased due to the ease in which the locations of, and the distances between, the porphyrin units can be controlled in these porous crystalline materials. Porphyrin-based MOFs with atomically precise structures provide an ideal platform for the investigation of their structure-function relationships in the solid state without compromising accessibility to the inherent properties of the porphyrin building blocks.

Molecular Copper(I)-Copper(II) Photosensitizer-Catalyst Photoelectrode for Water Oxidation.

Copper(II)-based electrocatalysts for water oxidation in aqueous solution have been studied previously, but photodriving these systems still remains a challenge. In this work, a bis(diimine)copper(I)-based donor-chromophore-acceptor system is synthesized and applied as the light-harvesting component of a photoanode. This molecular assembly was integrated onto a zinc oxide nanowire surface, and upon photoexcitation, chronoamperometric studies reveal that the integrated triad can inject electrons directly into the conduction band of zinc oxide, generating oxidizing equivalents that are then transferred to a copper(II) water oxidation catalyst in aqueous solution, yielding O from water with a Faradaic efficiency of 76%.

Competition between Singlet Fission and Spin-Orbit-Induced Intersystem Crossing in Anthanthrene and Anthanthrone Derivatives.

Singlet and triplet excited-state dynamics of anthanthrene and anthanthrone derivatives in solution are studied. Triisopropylsilyl- (TIPS) or H-terminated ethynyl groups are used to tune the singlet and triplet energies to enable their potential applications in singlet fission and triplet fusion processes. Time-resolved optical and electron paramagnetic resonance (EPR) spectroscopies are used to obtain a mechanistic understanding of triplet formation.

From Transition Metals to Lanthanides to Actinides: Metal-Mediated Tuning of Electronic Properties of Isostructural Metal-Organic Frameworks.

Isostructural metal-organic frameworks (MOFs) have been prepared from a variety of metal-oxide clusters, including transition metals, lanthanides, and actinides. Experimental and calculated shifts in O-H stretching frequencies for hydroxyl groups associated with the metal-oxide nodes reveal varying electronic properties for these units, thereby offering opportunities to tune support effects for other materials deposited onto these nodes.

Morphological Engineering of Winged Au@MoS Heterostructures for Electrocatalytic Hydrogen Evolution.

Molybdenum disulfide (MoS) has been recognized as a promising cost-effective catalyst for water-splitting hydrogen production. However, the desired performance of MoS is often limited by insufficient edge-terminated active sites, poor electrical conductivity, and inefficient contact to the supporting substrate. To address these limitations, we developed a unique nanoarchitecture (namely, winged Au@MoS heterostructures enabled by our discovery of the "seeding effect" of Au nanoparticles for the chemical vapor deposition synthesis of vertically aligned few-layer MoS wings).

Improving the Efficiency of Mustard Gas Simulant Detoxification by Tuning the Singlet Oxygen Quantum Yield in Metal-Organic Frameworks and Their Corresponding Thin Films.

The photocatalytically driven partial oxidation of a mustard gas simulant, 2-chloroethyl ethyl sulfide (CEES), was studied using the perylene-based metal-organic framework (MOF) UMCM-313 and compared to the activities of the Zr-based MOFs: PCN-222/MOF-545 and NU-1000. The rates of CEES oxidation positively correlated with the singlet oxygen quantum yield of the MOF linkers, porphyrin (PCN-222/MOF-545) < pyrene (NU-1000) < perylene (UMCM-313). Subsequently, thin films of UMCM-313 and NU-1000 were solvothermally grown on a conductive glass substrate to minimize catalyst loading and prevent light scattering by suspended MOF particles.

Photodriven hydrogen evolution by molecular catalysts using AlO-protected perylene-3,4-dicarboximide on NiO electrodes.

The design of efficient hydrogen-evolving photocathodes for dye-sensitized photoelectrochemical cells (DSPECs) requires the incorporation of molecular light absorbing chromophores that are capable of delivering reducing equivalents to molecular proton reduction catalysts at rates exceeding those of charge recombination events. Here, we report the functionalization and kinetic analysis of a nanostructured NiO electrode with a modified perylene-3,4-dicarboximide chromophore () that is stabilized against degradation by atomic layer deposition (ALD) of thick insulating AlO layers. Following photoinduced charge injection into NiO in high yield, films with AlO layers demonstrate longer charge separated lifetimes as characterized femtosecond transient absorption spectroscopy and photoelectrochemical techniques.

Excimer Formation and Symmetry-Breaking Charge Transfer in Cofacial Perylene Dimers.

The use of multiple chromophores as photosensitizers for catalysts involved in energy-demanding redox reactions is often complicated by electronic interactions between the chromophores. These interchromophore interactions can lead to processes, such as excimer formation and symmetry-breaking charge separation (SB-CS), that compete with efficient electron transfer to or from the catalyst. Here, two dimers of perylene bound either directly or through a xylyl spacer to a xanthene backbone were synthesized to probe the effects of interchromophore electronic coupling on excimer formation and SB-CS using ultrafast transient absorption spectroscopy.

Effect of Perylene Photosensitizer Attachment to [Pd(triphosphine)L] on CO Electrocatalysis.

Two new covalently linked chromophore-CO reduction catalyst systems were prepared using a perylene chromophore and a bis[(dicyclohexylphosphino)ethyl]phenylphosphinopalladium(II) catalyst. The primary goal of this study is to probe the influence of photosensitizer attachment on the electrocatalytic performance. The position either para or meta to the phosphorus on the phenyl group of the palladium complex was linked via a 2,5-xylyl group to the 3 position of perylene.

Emissive Ir(III) complexes bearing thienylamido groups on a 1,10-phenanthroline scaffold.

The synthesis, structures and photophysical properties of a series of bis-cyclometallated Ir(iii) complexes bearing phenylpyrazole (ppz) cyclometallating ligands and phenanthroline-based ancillary ligands containing thienyl- and bithienylamido groups are reported. All complexes are emissive in solution, while in PMMA films strong emission is observed from the thienylamido substituted complex with no emission from the bithienylamido complex. The bithienylamido substituted complex has an excited state lifetime which is significantly longer than the emission lifetime, attributed to the population of non-equilibrated (3)MLCT and (3)LC states in this complex.

Direct C-F bond formation using photoredox catalysis.

We have developed the first example of a photoredox catalytic method for the formation of carbon-fluorine (C-F) bonds. The mechanism has been studied using transient absorption spectroscopy and involves a key single-electron transfer from the (3)MLCT (triplet metal-to-ligand charge transfer) state of Ru(bpy)3(2+) to Selectfluor. Not only does this represent a new reaction for photoredox catalysis, but the mild reaction conditions and use of visible light also make it a practical improvement over previously developed UV-mediated decarboxylative fluorinations.

Long-lived, directional photoinduced charge separation in RuII complexes bearing laminate polypyridyl ligands.

RuII complexes incorporating both amide-linked bithiophene donor ancillary ligands and laminate acceptor ligands; dipyrido[3,2-a:2',3'-c]phenazine (dppz), tetrapyrido[3,2-a:2',3'-c:3'',2''-h:2''',3'''-j]phenazine (tpphz), and 9,11,20,22-tetraazatetrapyrido[3,2-a:2',3'-c:3'',2''-l:2''',3''']-pentacene (tatpp) exhibit long-lived charge separated (CS) states, which have been analyzed using time-resolved transient absorption (TA), fluorescence, and electronic absorption spectroscopy in addition to ground state electrochemical and spectroelectrochemical measurements. These complexes possess two electronically relevant ³MLCT states related to electron occupation of MOs localized predominantly on the proximal "bpy-like" portion and central (or distal) "phenazine-like" portion of the acceptor ligand as well as energetically similar ³LC and ³ILCT states. The unusually long excited state lifetimes (τ up to 7 μs) observed in these complexes reflect an equilibration of the ³MLCTprox or ³MLCTdist states with additional triplet states, including a ³LC state and a ³ILCT state that formally localizes a hole on the bithiophene moiety and an electron on the laminate acceptor ligand.

Cleavage of DNA by proton-coupled electron transfer to a photoexcited, hydrated Ru(II) 1,10-phenanthroline-5,6-dione complex.

Visible light irradiation of a ruthenium(II) quinone-containing complex, [(phen)(2)Ru(phendione)](2+) (1(2+)), where phendione = 1,10-phenanthroline-5,6-dione, leads to DNA cleavage in an oxygen independent manner. A combination of NMR analyses, transient absorption spectroscopy, and fluorescence measurements in water and acetonitrile reveal that complex 1(2+) must be hydrated at the quinone functionality, giving [(phen)(2)Ru(phenH(2)O)](2+) (1H(2)O(2+), where phenH(2)O = 1,10-phenanthroline-6-one-5-diol), in order to access a long-lived (3)MLCT(hydrate) state (τ ∼ 360 ns in H(2)O) which is responsible for DNA cleavage. In effect, hydration at one of the carbonyl functions effectively eliminates the low-energy (3)MLCT(SQ) state (Ru(III) phen-semiquinone radical anion) as the predominant nonradiative decay pathway.

Ligand-triplet-fueled long-lived charge separation in ruthenium(II) complexes with bithienyl-functionalized ligands.

Ruthenium(II) polypyridyl complexes with pendant bithienyl ligands exhibiting unusually long-lived (τ ~ 3-7 μs) charge-separated excited states and a large amount of stored energy (ΔG° ~ 2.0 eV) are reported. A long-lived ligand-localized triplet acts as an energy reservoir to fuel population of an interligand charge-transfer state via an intermediate metal-to-ligand charge-transfer state in these complexes.

Charge transfer and intraligand excited state interactions in platinum-sensitized dithienylethenes.

The photophysical behavior for two photochromic Pt-terpyridine acetylide complexes containing pendant dithienylethenes (DTEs) bound to the metal through the alkynyl linkage is presented. Selective excitation of the Pt complex with visible light resulted in the metal-sensitized ring closing of the DTE unit. The central purpose of this study was to understand how excited state interactions govern the photophysics by correlating differences in the linkage of the two components with differences in the intramolecular energy transfer processes that occur between the Pt complex and the DTE.