Study of Neutron-, Proton-, and Gamma-Irradiated Silicon Detectors Using the Two-Photon Absorption-Transient Current Technique.

The Two-Photon Absorption-Transient Current Technique (TPA-TCT) is a device characterisation technique that enables three-dimensional spatial resolution. Laser light in the quadratic absorption regime is employed to generate excess charge carriers only in a small volume around the focal spot. The drift of the excess charge carriers is studied to obtain information about the device under test.

Role of Atomicity and Interface on InO-TiO Composites: Thermo-Photo Valorization of CO.

The synthesis, physicochemical, and functional properties of composite solids resulting from the surface spread of oxidized indium species onto nanoplatelets of anatase were investigated. Both the size and the interaction between the indium- and titanium-containing components control the functional properties. In the reduction of CO to CO, the best samples have an indium content between ca.

Atomic and Electronic Structures of Co-Doped InO from Experiment and Theory.

The synthesis and properties of stoichiometric, reduced, and Co-doped InO are described in the light of several experimental techniques, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), ultraviolet (UV)-visible spectroscopy, porosimetry, and density functional theory (DFT) methods on appropriate models. DFT-based calculations provide an accurate prediction of the atomic and electronic structure of these systems. The computed lattice parameter is linearly correlated with the experimental result in the Co concentration ranging from 1.

Functional mapping to reveal slow conduction and substrate progression in atrial fibrillation.

Aims: The aim of our study was to analyse the response to short-coupled atrial extrastimuli to identify areas of hidden slow conduction (HSC) and their relationship with the atrial fibrillation (AF) phenotype.

Methods And Results: Twenty consecutive patients with paroxysmal AF and persistent AF (10:10) underwent the first pulmonary vein isolation procedure. Triple short-coupled extrastimuli were delivered in sinus rhythm (SR), and the evoked response was analysed: sites exhibiting double or highly fragmented electrograms (EGM) were defined as positive for HSC (HSC+).

Dynamics of Pd Subsurface Hydride Formation and Their Impact on the Selectivity Control for Selective Butadiene Hydrogenation Reaction.

Structure-sensitive catalyzed reactions can be influenced by a number of parameters. So far, it has been established that the formation of Pd-C species is responsible for the behavior of Pd nanoparticles employed as catalysts in a butadiene partial hydrogenation reaction. In this study, we introduce some experimental evidence indicating that subsurface Pd hydride species are governing the reactivity of this reaction.

Green Thermo-Photo Catalytic Production of Syngas Using Pd/Nb-TiO Catalysts.

In this contribution, a series of Pd-promoted Nb-doped titania samples were essayed in the gas-phase thermo-photo production of syngas from methanol/water mixtures. The Pd loading was tested in the 0.1 to 2.

Techniques for the Investigation of Segmented Sensors Using the Two Photon Absorption-Transient Current Technique.

The two photon absorption-transient current technique (TPA-TCT) was used to investigate a silicon strip detector with illumination from the top. Measurement and analysis techniques for the TPA-TCT of segmented devices are presented and discussed using a passive strip CMOS detector and a standard strip detector as an example. The influence of laser beam clipping and reflection is shown, and a method that allows to compensate these intensity-related effects for investigation of the electric field is introduced and successfully employed.

Fiber laser system of 1550 nm femtosecond pulses with configurable properties for the two-photon excitation of transient currents in semiconductor detectors.

A fiber laser system emitting ultrashort femtosecond pulses at 1550 nm with configurable properties has been developed as an excitation source for the two-photon absorption transient current technique (TPA-TCT). The modules of the system are designed to provide the optical specifications required at the output for localized characterization of semiconductor radiation detectors: variation of pulse energy between 10 nJ and 10 , variation of the pulse repetition rate from 8.2 MHz to single shot, and variation of pulse duration between 300 and 600 fs.

Synthesis, Characterization, and Photocatalytic, Bactericidal, and Molecular Docking Analysis of Cu-Fe/TiO Photocatalysts: Influence of Metallic Impurities and Calcination Temperature on Charge Recombination.

This research evaluated the potential photocatalytic efficiency of synthesized Cu-Fe/TiO photocatalysts against organic contaminants and biocontaminants through various synthesis methods (Cu-to-Fe ratio, metal loading, and calcination temperature) and reaction parameters (photocatalyst dose, irradiation time, and different initial methyl orange (MO) concentrations). In addition, the best photocatalysts were characterized through Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), differential reflectance spectroscopy (DRS), and X-ray photoelectron spectroscopy (XPS) analysis techniques. The best metal loading was 1 wt % with 5:5 Cu/Fe ratio and 300 °C calcination temperature (5Cu-5Fe/TiO-300) having 97% MO decolorization.

Metabolomics reveals synergy between Ag and g-CN in Ag/g-CN composite photocatalysts: a unique feature among Ag-doped biocidal materials.

Introduction: The silver/graphitic carbon nitride (Ag/g-CN) composite system exerts biocidal activity against the pathogenic bacterium Escherichia coli 1337-H that is stronger than that of well-known silver and titanium oxide (TiO)-based composites. However, whether the Ag/g-CN composite system has biocidal properties that the parent components do or do not have as separate chemical entities and whether they differ from those in Ag/TiO composite photocatalysts have not been clarified.

Objective: We investigated the chemical (cooperative charge handling and electronic properties) and biological (metabolic) effects exerted by the addition of Ag to g-CN and to TiO.

On the importance of tunica intima in the aging aorta: a three-layered in silico model for computing wall stresses in abdominal aortic aneurysms.

Layer-specific experimental data for human aortic tissue suggest that, in aged arteries and arteries with non-atherosclerotic intimal thickening, the innermost layer of the aorta increases significantly its stiffness and thickness, becoming load-bearing. However, there are very few computational studies of abdominal aortic aneurysms (AAAs) that take into account the mechanical contribution of the three layers that comprise the aneurysmal tissue. In this paper, a three-layered finite element model is proposed from the simplest uniaxial stress state to geometrically parametrized models of AAAs with different asymmetry values.

Sunlight-Operated TiO-Based Photocatalysts.

Photo-catalysis is a research field with broad applications in terms of potential technological applications related to energy production and managing, environmental protection, and chemical synthesis fields. A global goal, common to all of these fields, is to generate photo-catalytic materials able to use a renewable energy source such as the sun. As most active photocatalysts such as titanium oxides are essentially UV absorbers, they need to be upgraded in order to achieve the fruitful use of the whole solar spectrum, from UV to infrared wavelengths.

Characterization of Photo-catalysts: From Traditional to Advanced Approaches.

The article provides an overview of the most relevant characterization results of heterogeneous photo-catalytic materials available in the literature. First, we present a summary of the ex situ utilization of physico-chemical characterization techniques. In the majority of current works, pre and post-reaction samples are subjected to ex situ analysis using a multitechnique approach which attempts to render information about the morphological, structural, and electronic properties of relevance to interpret photoactivity.

A flexible cell for in situ combined XAS-DRIFTS-MS experiments.

A new cell for in situ combined X-ray absorption, diffuse reflectance IR Fourier transform and mass spectroscopies (XAS-DRIFTS-MS) is presented. The cell stands out among others for its achievements and flexibility. It is possible to perform XAS measurements in transmission or fluorescence modes, and the cell is compatible with external devices like UV-light and Raman probes.

Thermo-Photocatalysis: Environmental and Energy Applications.

Catalysis is an integral part of a majority of chemical operations focused on the generation of value-added chemicals or fuels. Similarly, the extensive use of fossil-derived fuels and chemicals has led to deterioration of the environment. Catalysis currently plays a key role in mitigating such effects.

Braiding kinetics and spectroscopy in photo-catalysis: the spectro-kinetic approach.

The combination of kinetic and spectroscopic tools has become a key scientific methodology for the understanding of catalytic behavior but its application in photocatalysis has inherent difficulties due to the nature of the energy source of the reaction. This review article provides an overview of its use by, first, presenting mechanistically derived kinetic formulations and spectroscopic data handling methods including intrinsic expressions for light and, second, highlighting representative examples of application. To do it we consider universal catalytic systems, particularly (although not exclusively) titania-based materials, and the most frequent hole and/or electron triggered reaction schemes.

Highly Active Catalytic Ruthenium/TiO Nanomaterials for Continuous Production of γ-Valerolactone.

Green energy production from renewable sources is an attractive, but challenging topic to face the likely energy crisis scenario in the future. In the current work, a series of versatile Ru/TiO catalysts were simply synthesized and employed in continuous-flow catalytic transfer hydrogenation of industrially derived methyl levulinate biowaste (from Avantium Chemicals B.V.

Phase-Contact Engineering in Mono- and Bimetallic Cu-Ni Co-catalysts for Hydrogen Photocatalytic Materials.

Understanding how a photocatalyst modulates its oxidation state, size, and structure during a photocatalytic reaction under operando conditions is strongly limited by the mismatch between (catalyst) volume sampled by light and, to date, the physicochemical techniques and probes employed to study them. A synchrotron micro-beam X-ray absorption spectroscopy study together with the computational simulation and analysis (at the X-ray cell) of the light-matter interaction occurring in powdered TiO -based monometallic Cu, Ni and bimetallic CuNi catalysts for hydrogen production from renewables was carried out. The combined information unveils an unexpected key catalytic role involving the phase contact between the reduced and oxidized non-noble metal phases in all catalysts and, additionally, reveals the source of the synergistic Cu-Ni interaction in the bimetallic material.

Surface CuO, Bi2O3, and CeO2 Species Supported in TiO2-Anatase: Study of Interface Effects in Toluene Photodegradation Quantum Efficiency.

The enhancement of active triggered by surface deposition of Cu, Bi, and Ce containing oxidic species onto a high surface area anatase is analyzed through the calculation of the quantum efficiency for toluene photodegradation under UV and Sunlight-type illumination. To this end, series of Cu, Bi, and Ce containing oxides supported on anatase were synthesized having a growing content of the Cu, Bi, and Ce surface species and characterized with X-ray diffraction and photoelectron, UV-visible, and photoluminescence spectroscopies as well as transmission electron microscopy. Utilizing the surface concentration of Cu, Bi, and Ce species as a tool, we analyzed the influence of the system physicochemical properties affecting quantum efficiency in anatase-based materials.

Interface Effects in Sunlight-Driven Ag/g-C3N4 Composite Catalysts: Study of the Toluene Photodegradation Quantum Efficiency.

Metallic silver (ranging from 1 to 10 wt %) was deposited onto a graphite-like carbon nitride photocatalyst through a microemultion method. Surface, morphological, and structural properties of the resulting materials were characterized using BET and porosity measurements, X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and UV-vis and photoluminescence spectroscopy. The activity of the composite samples under sunlight-type and visible illumination was measured for toluene photodegradation and was analyzed by means of the reaction rate and the quantum efficiency parameter.

Morphological and structural behavior of TiO2 nanoparticles in the presence of WO3: crystallization of the oxide composite system.

Composite TiO2-WO3 oxide materials were prepared by a single pot microemulsion method and studied during calcination treatments under dry air in order to analyze the influence of tungsten on the behavior of the dominant titania component. To this end, the surface and bulk morphological and structural evolution of the solid precursors was studied using X-ray diffraction and infrared spectroscopy. In the calcination process, differences in the dominant titania component behavior appeared as a function of the W/Ti atomic ratio of the precursor.

Understanding the antimicrobial mechanism of TiO₂-based nanocomposite films in a pathogenic bacterium.

Titania (TiO₂)-based nanocomposites subjected to light excitation are remarkably effective in eliciting microbial death. However, the mechanism by which these materials induce microbial death and the effects that they have on microbes are poorly understood. Here, we assess the low dose radical-mediated TiO₂ photocatalytic action of such nanocomposites and evaluate the genome/proteome-wide expression profiles of Pseudomonas aeruginosa PAO1 cells after two minutes of intervention.

Biodegradable polycaprolactone-titania nanocomposites: preparation, characterization and antimicrobial properties.

Nanocomposites obtained from the incorporation of synthesized TiO2 nanoparticles (≈10 nm average primary particle size) in different amounts, ranging from 0.5 to 5 wt.%, into a biodegradable polycaprolactone matrix are achieved via a straightforward and commercial melting processing.

Influence of the Ce-Zr promoter on Pd behaviour under dynamic CO/NO cycling conditions: a structural and chemical approach.

The behaviour of the Pd phase in three way catalysts (TWCs) having a Ce-Zr oxide as a promoter component has been examined under CO/NO cycling conditions. In order to extract information on the role of the noble metal and the metal-promoter interface, two catalysts in, respectively, the presence or the absence of the promoter and having a similar Pd particle size were analyzed by a synchronous multitechnique approach using X-ray absorption (XAS) or high energy X-ray diffraction (HXRD) in combination with diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS) and mass spectrometry (MS). From a structural point of view it is shown that the promoter oxide strongly influences Pd behaviour, limiting morphological (size/shape) and structural (formation of carbide/oxide phases) modifications occurring under dynamic conditions in the absence of the promoter.