Using visual scores for genomic prediction of complex traits in breeding programs.

An approach for handling visual scores with potential errors and subjectivity in scores was evaluated in simulated and blueberry recurrent selection breeding schemes to assist breeders in their decision-making. Most genomic prediction methods are based on assumptions of normality due to their simplicity and ease of implementation. However, in plant and animal breeding, continuous traits are often visually scored as categorical traits and analyzed as a Gaussian variable, thus violating the normality assumption, which could affect the prediction of breeding values and the estimation of genetic parameters.

Population size in QTL detection using quantile regression in genome-wide association studies.

The aim of this study was to evaluate the performance of Quantile Regression (QR) in Genome-Wide Association Studies (GWAS) regarding the ability to detect QTLs (Quantitative Trait Locus) associated with phenotypic traits of interest, considering different population sizes. For this, simulated data was used, with traits of different levels of heritability (0.30 and 0.

Increasing cassava root yield: Additive-dominant genetic models for selection of parents and clones.

Genomic selection has been promising in situations where phenotypic assessments are expensive, laborious, and/or inefficient. This work evaluated the efficiency of genomic prediction methods combined with genetic models in clone and parent selection with the goal of increasing fresh root yield, dry root yield, as well as dry matter content in cassava roots. The bias and predictive ability of the combinations of prediction methods Genomic Best Linear Unbiased Prediction (G-BLUP), Bayes B, Bayes Cπ, and Reproducing Kernel Hilbert Spaces with additive and additive-dominant genetic models were estimated.

Multivariate analysis methods improve the selection of strawberry genotypes with low cold requirement.

Methods of multivariate analysis is a powerful approach to assist the initial stages of crops genetic improvement, particularly, because it allows many traits to be evaluated simultaneously. In this study, heat-tolerant genotypes have been selected by analyzing phenotypic diversity, direct and indirect relationships among traits were identified, and four selection indices compared. Diversity was estimated using K-means clustering with the number of clusters determined by the Elbow method, and the relationship among traits was quantified by path analysis.

Designing the best breeding strategy for Coffea canephora: Genetic evaluation of pure and hybrid individuals aiming to select for productivity and disease resistance traits.

Breeding programs of the species Coffea canephora rely heavily on the significant genetic variability between and within its two varietal groups (conilon and robusta). The use of hybrid families and individuals has been less common. The objectives of this study were to evaluate parents and families from the populations of conilon, robusta, and its hybrids and to define the best breeding and selection strategies for productivity and disease resistance traits.

Can Cross-Country Genomic Predictions Be a Reasonable Strategy to Support Germplasm Exchange? - A Case Study With Hydrogen Cyanide in Cassava.

Genomic prediction (GP) offers great opportunities for accelerated genetic gains by optimizing the breeding pipeline. One of the key factors to be considered is how the training populations (TP) are composed in terms of genetic improvement, kinship/origin, and their impacts on GP. Hydrogen cyanide content (HCN) is a determinant trait to guide cassava's products usage and processing.

Genomic prediction in family bulks using different traits and cross-validations in pine.

Genomic prediction integrates statistical, genomic, and computational tools to improve the estimation of breeding values and increase genetic gain. Due to the broad diversity in mating systems, breeding schemes, propagation methods, and unit of selection, no universal genomic prediction approach can be applied in all crops. In a genome-wide family prediction (GWFP) approach, the family is the basic unit of selection.

Genomic Selection in Tropical Forage Grasses: Current Status and Future Applications.

The world population is expected to be larger and wealthier over the next few decades and will require more animal products, such as milk and beef. Tropical regions have great potential to meet this growing global demand, where pasturelands play a major role in supporting increased animal production. Better forage is required in consonance with improved sustainability as the planted area should not increase and larger areas cultivated with one or a few forage species should be avoided.

Multiple-trait model through Bayesian inference applied to Jatropha curcas breeding for bioenergy.

Multiple-trait model tends to be the best alternative for the analysis of repeated measures, since they consider the genetic and residual correlations between measures and improve the selective accuracy. Thus, the objective of this study was to propose a multiple-trait Bayesian model for repeated measures analysis in Jatropha curcas breeding for bioenergy. To this end, the grain yield trait of 730 individuals of 73 half-sib families was evaluated over six harvests.

Random regression for modeling yield genetic trajectories in Jatropha curcas breeding.

Random regression models (RRM) are a powerful tool to evaluate genotypic plasticity over time. However, to date, RRM remains unexplored for the analysis of repeated measures in Jatropha curcas breeding. Thus, the present work aimed to apply the random regression technique and study its possibilities for the analysis of repeated measures in Jatropha curcas breeding.

Multiple-trait, random regression, and compound symmetry models for analyzing multi-environment trials in maize breeding.

An efficient and informative statistical method to analyze genotype-by-environment interaction (GxE) is needed in maize breeding programs. Thus, the objective of this study was to compare the effectiveness of multiple-trait models (MTM), random regression models (RRM), and compound symmetry models (CSM) in the analysis of multi-environment trials (MET) in maize breeding. For this, a data set with 84 maize hybrids evaluated across four environments for the trait grain yield (GY) was used.

Enviromics in breeding: applications and perspectives on envirotypic-assisted selection.

We propose the application of enviromics to breeding practice, by which the similarity among sites assessed on an "omics" scale of environmental attributes drives the prediction of unobserved genotype performances. Genotype by environment interaction (GEI) studies in plant breeding have focused mainly on estimating genetic parameters over a limited number of experimental trials. However, recent geographic information system (GIS) techniques have opened new frontiers for better understanding and dealing with GEI.

Unraveling candidate genes underlying biomass digestibility in elephant grass (Cenchrus purpureus).

Background: Elephant grass [Cenchrus purpureus (Schumach.) Morrone] is used for bioenergy and animal feed. In order to identify candidate genes that could be exploited for marker-assisted selection in elephant grass, this study aimed to investigate changes in predictive accuracy using genomic relationship information and simple sequence repeats for eight traits (height, green biomass, dry biomass, acid and neutral detergent fiber, lignin content, biomass digestibility, and dry matter concentration) linked to bioenergetics and animal feeding.

Cassava yield traits predicted by genomic selection methods.

Genomic selection (GS) has been used to optimize genetic gains when phenotypic selection is considered costly and difficult to measure. The objective of this work was to evaluate the efficiency and consistency of GS prediction for cassava yield traits (Manihot esculenta Crantz) using different methods, taking into account the effect of population structure. BLUPs and deregressed BLUPs were obtained for 888 cassava accessions and evaluated for fresh root yield, dry root yield and dry matter content in roots in 21 trials conducted from 2011 to 2016.

Early Selection Enabled by the Implementation of Genomic Selection in Breeding.

Genomic Selection (GS) has allowed the maximization of genetic gains per unit time in several annual and perennial plant species. However, no GS studies have addressed , the most economically important species of the genus . Therefore, this study aimed (i) to evaluate the applicability and accuracy of GS in the prediction of the genomic estimated breeding value (GEBV); (ii) to estimate the genetic parameters; and (iii) to evaluate the time reduction of the selection cycle by GS in Arabica coffee breeding.

Genome-Wide Association and Regional Heritability Mapping of Plant Architecture, Lodging and Productivity in .

The availability of high-density molecular markers in common bean has allowed to explore the genetic basis of important complex agronomic traits with increased resolution. Genome-Wide Association Studies (GWAS) and Regional Heritability Mapping (RHM) are two analytical approaches for the detection of genetic variants. We carried out GWAS and RHM for plant architecture, lodging and productivity across two important growing environments in Brazil in a germplasm of 188 common bean varieties using DArTseq genotyping strategies.

Regional heritability mapping and genome-wide association identify loci for complex growth, wood and disease resistance traits in Eucalyptus.

Although genome-wide association studies (GWAS) have provided valuable insights into the decoding of the relationships between sequence variation and complex phenotypes, they have explained little heritability. Regional heritability mapping (RHM) provides heritability estimates for genomic segments containing both common and rare allelic effects that individually contribute too little variance to be detected by GWAS. We carried out GWAS and RHM for seven growth, wood and disease resistance traits in a breeding population of 768 Eucalyptus hybrid trees using EuCHIP60K.

Mating System and Genetic Composition of the Macaw Palm (Acrocomia aculeata): Implications for Breeding and Genetic Conservation Programs.

Acrocomia aculeata (Arecaceae), a palm endemic to South and Central America, is a potential oil crop. Knowledge of the mating system of this species is limited to its reproductive biology and to studies using molecular markers. The present study analyzed genetic diversity between its developmental stages and determined its prevailing mating system in order to support genetic conservation and breeding programs.

Ridge, Lasso and Bayesian additive-dominance genomic models.

Background: A complete approach for genome-wide selection (GWS) involves reliable statistical genetics models and methods. Reports on this topic are common for additive genetic models but not for additive-dominance models. The objective of this paper was (i) to compare the performance of 10 additive-dominance predictive models (including current models and proposed modifications), fitted using Bayesian, Lasso and Ridge regression approaches; and (ii) to decompose genomic heritability and accuracy in terms of three quantitative genetic information sources, namely, linkage disequilibrium (LD), co-segregation (CS) and pedigree relationships or family structure (PR).

Identification of Fungus Resistant Wild Accessions and Interspecific Hybrids of the Genus Arachis.

Peanut, Arachis hypogaea L., is a protein-rich species consumed worldwide. A key improvement to peanut culture involves the development of cultivars that resist fungal diseases such as rust, leaf spot and scab.

Unraveling additive from nonadditive effects using genomic relationship matrices.

The application of quantitative genetics in plant and animal breeding has largely focused on additive models, which may also capture dominance and epistatic effects. Partitioning genetic variance into its additive and nonadditive components using pedigree-based models (P-genomic best linear unbiased predictor) (P-BLUP) is difficult with most commonly available family structures. However, the availability of dense panels of molecular markers makes possible the use of additive- and dominance-realized genomic relationships for the estimation of variance components and the prediction of genetic values (G-BLUP).

Genomic growth curves of an outbred pig population.

In the current post-genomic era, the genetic basis of pig growth can be understood by assessing SNP marker effects and genomic breeding values (GEBV) based on estimates of these growth curve parameters as phenotypes. Although various statistical methods, such as random regression (RR-BLUP) and Bayesian LASSO (BL), have been applied to genomic selection (GS), none of these has yet been used in a growth curve approach. In this work, we compared the accuracies of RR-BLUP and BL using empirical weight-age data from an outbred F2 (Brazilian Piau X commercial) population.

Bayesian inference of mixed models in quantitative genetics of crop species.

The objectives of this study were to implement a Bayesian framework for mixed models analysis in crop species breeding and to exploit alternatives for informative prior elicitation. Bayesian inference for genetic evaluation in annual crop breeding was illustrated with the first two half-sib selection cycles in a popcorn population. The Bayesian framework was based on the Just Another Gibbs Sampler software and the R2jags package.

The influence of animals from embryo transfer on the genetic evaluation of growth in Simmental beef cattle by using multi-trait models.

The weight records from Simmental beef cattle were used in a genetic evaluation of growth with or without the inclusion of animals obtained by embryo transfer. A multi-trait model in which embryo transfer individuals were excluded (MTM1) contained 29,510 records from 10,659 animals, while another model without exclusion of these animals (MTM2) contained 62,895 weight records from 23,160 animals. The weight records were adjusted for ages of 100, 205, 365, 450, 550 and 730 days.

Genomic selection for growth and wood quality in Eucalyptus: capturing the missing heritability and accelerating breeding for complex traits in forest trees.

• Genomic selection (GS) is expected to cause a paradigm shift in tree breeding by improving its speed and efficiency. By fitting all the genome-wide markers concurrently, GS can capture most of the 'missing heritability' of complex traits that quantitative trait locus (QTL) and association mapping classically fail to explain. Experimental support of GS is now required.