Influence of different viscosity and chemical composition of flowable composite resins: A 48-month split-mouth double-blind randomized clinical trial.

Objectives: To evaluate the clinical performance of two flowable composites based on methacrylate and one based on ormocer in treating non-carious cervical lesions (NCCLs) after 48-month evaluation in a split-mouth double-blind clinical study design.

Methods: A total of 183 restorations were performed on NCCLs using a universal adhesive system (Futurabond U, Voco GmbH) with selective enamel etching on 27 participants: two participants received twelve restorations each, three received nine restorations each, and 22 participants received six restorations each. Three different flowable composites were employed (n = 61): a low-viscosity methacrylate-based composite (GrandioSO Flow, LVM), a high-viscosity methacrylate-based composite (GrandioSO Heavy Flow, HVM), and an ormocer-based flowable composite (Admira Fusion Flow, ORM).

Influence of surface sealants on the quality of posterior restorations with bulk-fill composites: A 4-year randomized clinical trial.

Objectives: The aim of this study was to evaluate the clinical performance of surface sealants associated with a bulk-fill composite in posterior restorations after 4 years.

Methods: A total of 174 posterior restorations were performed on 57 participants using a self-etch adhesive system and a bulk-fill composite. The groups were then divided into the following categories: 1) without surface sealant (NoS), 2) with surface sealant Biscover (Bisco, SBi), and 3) with surface sealant Permaseal (Ultradent, SPe).

Five-year clinical evaluation of universal adhesive applied following different bonding techniques: A randomized multicenter clinical trial.

Objectives: To evaluate the clinical performance of a universal adhesive system (Futurabond U, Voco) when applied following different adhesive strategies in non-carious cervical lesions (NCCLs) after 5 years.

Methods: Fifty participants were included. Futurabond U (Voco) was applied in NCCLs using four adhesive strategies (n = 50 each): only self-etch (SE); selective enamel etching + self-etch (SET + SE); etch-and-rinse with dry dentin (ERD); and etch-and-rinse with wet dentin (ERW).

Can composite packaging and selective enamel etching affect the clinical behavior of bulk-fill composite resin in posterior restorations? 24-month results of a randomized clinical trial.

Objectives: This is a double-blind, split-mouth, randomized clinical study that aims to evaluate the influence of bulk-fill composite packaging presented in syringes (BSy) and capsules (BCa), and the effect of selective enamel etching (SEE) on the clinical performance of class I and II bulk-fill resin composite restorations after 24 months.

Methodology: A total of 295 class I or class II restorations were performed on 70 patients. One universal adhesive was applied in all restorations.

A 24-month clinical evaluation of composite resins with different viscosity and chemical compositions: a randomized clinical trial.

Objectives: To evaluate the clinical performance of two methacrylate-based flowable composites and an ormocer-based flowable composite in noncarious cervical lesions (NCCLs) in adult participants.

Method And Materials: In total, 183 restorations were performed on NCCLs. All cavities were restored using a universal adhesive system (Futurabond U, Voco) with selective enamel etching and with one of the three evaluated flowable composites (n = 61): low-viscosity methacrylate-based composite (GrandioSO Flow, LV), high-viscosity methacrylate-based composite (GrandioSO Heavy Flow, HV), and an ormocer-based flowable composite (Admira Fusion Flow, ORM).

Universal Simplified Adhesive applied under different bonding technique's: 36-month Randomized Multicentre Clinical Trial.

Objectives: To evaluate the clinical performance of a new dual-cure universal adhesive system (Futurabond U, Voco) when applied using different application strategies in non-carious cervical lesions (NCCLs) after 36 months.

Material And Methods: Futurabond U was applied in NCCLs of 50 subjects using four adhesion strategies (n = 50 restorations per group): only self-etch (SEE); selective enamel etching + self-etch (SET); etch-and-rinse with dry dentin (ERDry); and etch-and-rinse with wet dentin (ERWet). All cavities were restored using Admira Fusion composite resin (Voco).

Thirty-six-month follow-up of cervical composite restorations placed with an MDP-free universal adhesive system using different adhesive protocols: a randomized clinical trial.

Objectives: To evaluate the influence of different application strategies on the clinical behavior of an MDP-free universal adhesive placed in non-carious cervical lesions (NCCLs) over the course of 36 months.

Materials And Methods: Thirty-one patients participated in this study (N = 31). One hundred twenty-four restorations were assigned to four groups: We used the self-etch strategy on groups with (SE-et) and without (SET) selective enamel etching, and the etch-and-rinse strategy on groups with dry (ER-D) and moist (ER-M) dentin.

Nanofilled/nanohybrid and hybrid resin-based composite in patients with direct restorations in posterior teeth: A systematic review and meta-analysis.

Objective: A systematic review and a meta-analysis were performed to answer the following research question: Are there differences in the color match and surface texture of nanofilled/nanohybrid and hybrid composite in patients with direct posterior restorations?

Data: Randomized clinical trials that compared nanofilled/nanohybrid and hybrid composite in direct restoration in posterior teeth were included. For the analysis of the bias the risk of bias tool (RoB) was used. Meta-analyses of different pairs (nanofilled vs.

Clinical time and postoperative sensitivity after use of bulk-fill (syringe and capsule) vs. incremental filling composites: a randomized clinical trial.

The objectives of this double-blind randomized clinical trial were to compare (a) the clinical times and (b) the occurrence and severity of postoperative sensitivity, of posterior restoration that used a universal adhesive, in a self-etch or selective enamel-etching technique, along with incremental or bulk-fill composites (presented in syringes or capsules). A total of 295 posterior restorations were placed according to the following groups: SETB - self-etch/bulk-fill in syringe; SETC - self-etch/bulk-fill in capsules; SETI - self-etch/incremental; SEEB - selective enamel-etching/bulk-fill in syringe; SEEC - selective enamel-etching/bulk-fill in capsules; and SEEI - selective enamel-etching/incremental. Clinical time was assessed by a reason (s/mm3) between the total volume of resin inserted and the total time required to perform the restorations.

Effect of a dentifrice containing nanohydroxyapatite on the roughness, color, lightness, and brightness of dental enamel subjected to a demineralization challenge.

The dental profession is still pursuing the most effective way to treat white-spot lesions in order to produce a sound and esthetically pleasing enamel surface. The aim of the present research was to evaluate in vitro the effects of a dentifrice with nanohydroxyapatite (nano-HAp) on the roughness, color, lightness, and brightness (gloss) of bovine enamel subjected to pH cycling. Twelve enamel discs prepared from bovine incisors were divided into 2 experimental groups: dentifrice with sodium fluoride (Colgate Total 12 Clean Mint) and dentifrice with nanoHAp (Megasonex).

Pre-operative use of dexamethasone does not reduce incidence or intensity of bleaching-induced tooth sensitivity. A triple-blind, parallel-design, randomized clinical trial.

Objectives: This study evaluated the effect of the administration of pre-operative dexamethasone on tooth sensitivity stemming from in-office bleaching.

Materials And Methods: A triple-blind, parallel-design, randomized clinical trial was conducted on 70 volunteers who received dexamethasone or placebo capsules. The drugs were administered in a protocol of three daily 8-mg doses of the drug, starting 48 h before the in-office bleaching treatment.

Influence of custom adaptation on the characteristics of fiber posts.

In this in vitro study, 3 experiments were conducted to evaluate the influence of customizing the apical portion on the characteristics of fiber posts. In the first experiment, 4 fiber posts were submitted to different custom adaptations (no customization, industrial shaping tool, diamond bur, or paper disc) and were observed with a scanning electron microscope to evaluate the micromorphologic changes. In the second experiment, 60 posts of different sizes were divided into 6 groups (n = 10): 0 (No.

Clinical Considerations on the Root Coverage of Gingival Recessions in Thin or Thick Biotype.

Gingival biotype is a clinical term used to describe the thickness of the gingiva. It has been classified as being thick or thin and may be related to the clinical outcome of root coverage procedures. This study evaluated the impact of gingival biotype on the clinical outcome of root coverage procedures following subepithelial connective tissue graft plus coronally positioned flap.

Low-shrinkage composites: an in vitro evaluation of sealing ability after occlusal loading.

The objective of this in vitro study was to compare the microleakage of a flowable low-shrinkage-stress resin composite--in a Class II fatigue-loading design when used as a 4 mm dentin replacement--to a conventionally layered silorane-based resin composite. Eighty standardized 4 mm deep cavities, divided into 4 subgroups, were restored with the 2 tested materials. Half of the restorations were submitted to mechanical loading, and all of the restorations were prepared for microleakage evaluation.

Periodontal plastic microsurgery in the treatment of deep gingival recession after orthodontic movement.

Gingival recession is a condition that affects a large portion of the young and adult population and negatively affects the aesthetic aspects of the smile. Many factors are related to its development, including orthodontic movement beyond the osseous limits. Many treatment options have been proposed to cover the exposed root surface.

Influence of periodontal biotype on the presence of interdental papillae.

The absence of interdental papillae can be a negative influence in aesthetics. Periodontal biotype (PB) is one of the factors that can possibly influence this relation and has to be considered in periodontal diagnosis and treatment planning. The objective of this study was to evaluate the influence of the periodontal biotype on the presence and absence of interdental papillae.

Changes in surface roughness and color stability of two composites caused by different bleaching agents.

The objective of this study was to evaluate the effect of two bleaching agents (10% and 35% hydrogen peroxide) on the color stability and surface roughness of two composites, one nanohybrid and one nanoparticle. Specimens were polished, aged, stained, bleached and polished again. The action of the bleaching agents on the composites was analyzed using a profilometer (surface roughness) and a spectrophotometer (color stability).

Relationship between the width of the zone of keratinized tissue and thickness of gingival tissue in the anterior maxilla.

The aim of this study was to evaluate whether there is a positive correlation between the width of the zone of gingival keratinized tissue and its thickness. Maxillary right canines, lateral incisors, and central incisors of 60 patients (30 men, 30 women) between the ages of 20 and 35 years were examined. Using an endodontic spacer with a rubber cursor and a digital caliper of 0.

Hybrid layer thickness and morphology: Influence of cavity preparation with air abrasion.

Dentinal surfaces prepared with air abrasion have considerably different characteristics from those prepared with conventional instruments. Different hybrid layer morphology and thickness occur, which can result in differences in the quality of restorations placed on dentinal surfaces prepared with a diamond bur compared to surfaces prepared using air abrasion. The objective of this study was to compare the hybrid layer thickness and morphology formed utilizing Scotchbond Multi-Purpose Plus (SBMP) on dentin prepared with a diamond bur in a high-speed handpiece and on dentin prepared using air abrasion.

Shear bond strength of two adhesive systems bonded to Er:YAG laser-prepared dentin.

Dentinal surfaces prepared with an Er:YAG laser have distinctly different characteristics compared to those prepared with conventional instruments. The objective of this study was to evaluate the shear bond strength of a total-etch adhesive system and a self-etch adhesive system to dentin, prepared conventionally or with an Er:YAG laser. Specimens that were prepared with a diamond bur and treated with the total-etch adhesive showed the highest mean bond strength, followed by specimens prepared with the laser and treated with the total-etch adhesive, specimens prepared with a diamond bur and treated with the self-etch adhesive, and specimens prepared with the laser and treated with the self-etch adhesive, but there were no differences among the groups (P > 0.

Flexural bond strength of repaired composite resin restorations: influence of surface treatments and aging.

The objective of this study was to evaluate the effect of storage in deionized water at room temperature, for seven days and six months, on the flexural strength of a repaired photocured microhybrid composite resin, using different surface treatments. After each surface treatment, the adhesive interface was analyzed with a surface roughness tester. The flexural strength of samples from each group was determined by three-point bending in a testing machine at a crosshead speed of 0.

Topographical evaluation of different glass and quartz fiber post surface treatments by a tridimensional surface roughness test.

A tridimensional surface roughness test evaluation is a nondestructive method that can be used to perform a topographic analysis of different surface treatments for glass and quartz fiber posts. This study divided 75 fiber posts into three groups according to their manufacturer. Each group was divided into five subgroups (n = 5), according to the surface treatment each received: immersion in hydrofluoric acid, sandblasting, immersion in hydrogen peroxide, sandblasting followed by immersion in hydrofluoric acid, or sandblasting followed by immersion in hydrogen peroxide.

Subepithelial connective tissue graft associated with apicoectomy and root-end fillings in the treatment of deep localized gingival recession with apex root exposure: case report.

Periodontal reconstructive surgery procedures seek to correct mucogingival defects, including gingival recession. This case report describes the use of a subepithelial connective tissue graft (SCTG) associated with root-end fillings using mineral trioxide aggregate (MTA) for the treatment of Miller Class II recession with root apex exposure. A partial-thickness double pedicle flap was made, followed by root preparation with curette and bur finishing.

SEM evaluation of the hybrid layer after cavity preparation with Er:YAG laser.

This study compared the thickness of the hybrid layer formed using Scotchbond Multi-Purpose Plus, Single Bond 2, Prime & Bond 2.1 and Xeno III on a dentin surface prepared with a diamond bur in a high speed handpiece or prepared with an Er:YAG laser used with two parameters of pulse energy (200 and 400 mJ) and two parameters of frequency (4 and 6 Hz). Flat dentin surfaces obtained from 20 human third molars were treated with the two methods and were then prepared with the dentin adhesive systems according to the manufacturers' instructions.

Evaluation of the cervical integrity during occlusal loading of Class II restorations.

There are many concerns regarding the clinical behavior of packable composite restorations in Class II cavities, particularly when those restorations are subjected to axial mechanical loads. This study evaluated microleakage in vitro in proximal vertical "slot"-type cavities with walls located in enamel and dentin, filled with packable composite, associated or not associated with a flowable composite, a reinforced light-curing glass-ionomer or a compomer, after being submitted to occlusal load cycling. These preparations were subjected to either occlusal load cycling or no occlusal load cycling.