Gas sensing properties of MWCNT layers electrochemically decorated with Au and Pd nanoparticles.

Multiwalled carbon nanotube (MWCNT)-based chemiresistors were electrochemically decorated with Au and Pd nanoparticles (NPs), resulting in an improvement in the detection of gaseous pollutants as compared to sensors based on pristine MWCNTs. Electrophoresis was used to decorate MWCNTs with preformed Au or Pd NPs, thus preserving their nanometer-sized dimensions and allowing the metal content to be tuned by simply varying the deposition time. The sensing response of unmodified and metal-decorated MWCNTs was evaluated towards different gaseous pollutants (e.

Sensitive detection of hydrocarbon gases using electrochemically Pd-modified ZnO chemiresistors.

Pristine and electrochemically Pd-modified ZnO nanorods (ZnO NRs) were proposed as active sensing layers in chemiresistive gas sensors for hydrocarbon (HC) gas detection (e.g., CH, CH CH).

Evaluation of gas-sensing properties of ZnO nanostructures electrochemically doped with Au nanophases.

A one-step electrochemical method based on sacrificial anode electrolysis (SAE) was used to deposit stabilized gold nanoparticles (Au NPs) directly on the surface of nanostructured ZnO powders, previously synthesized through a sol-gel process. The effect of thermal annealing temperatures (300 and 550 °C) on chemical, morphological, and structural properties of pristine and Au-doped ZnO nancomposites (Au@ZnO) was investigated. Transmission and scanning electron microscopy (TEM and SEM), as well as X-ray photoelectron spectroscopy (XPS), revealed the successful deposition of nanoscale gold on the surface of spherical and rod-like ZnO nanostructures, obtained after annealing at 300 and 550 °C, respectively.

The determination of the efficiency of energy dispersive X-ray spectrometers by a new reference material.

A calibration procedure for the detection efficiency of energy dispersive X-ray spectrometers (EDS) used in combination with scanning electron microscopy (SEM) for standardless electron probe microanalysis (EPMA) is presented. The procedure is based on the comparison of X-ray spectra from a reference material (RM) measured with the EDS to be calibrated and a reference EDS. The RM is certified by the line intensities in the X-ray spectrum recorded with a reference EDS and by its composition.

High-reflectivity HfO2/SiO2 ultraviolet mirrors.

High-reflectivity dense multilayer coatings were produced for the ultraviolet spectral region. Thin-film single layers and UV mirrors were deposited by ion plating and plasma ion-assisted deposition high-energetic technologies. Optical characterizations of HfO2 and SiO2 single layers are made.

High-performance deep-ultraviolet optics for free-electron lasers.

Working with wavelengths shorter than the deep ultraviolet involves the development of dedicated optics for free-electron lasers with devoted coating techniques and characterizations. High-performance deep-ultraviolet optics are specially developed to create low-loss, high-reflectivity dielectric mirrors with long lifetimes in harsh synchrotron radiation environments. In February 2001, lasing at 189.