Experimental and theoretical studies of linear and non-linear optical properties of novel fused-triazine derivatives for advanced technological applications.

Controlling photophysical properties is critical for the continued development of electroluminescent devices and luminescent materials. The preparation and study of novel molecules suitable as luminescent for the development of optoelectrical devices have recently received a lot of attention. Even though the as-triazine unit is a good building block for organic active substances, it is rarely used in this context.

1,2,4-Triazine-based Materials: Spectroscopic Investigation, DFT, NBO, and TD-DFT Calculations as Well As Dye-sensitized Solar Cells Applications.

In this manuscript, we report four series for 1,2,4-triazine derivatives as dye-sensitized solar cells (DSSCs). Density functional theory (DFT) methods via utilizing Becke's three-parameter functional and LeeeYangeParr functional (B3LYP) level with 6-31G (d, p) basis set to investigate their modeling molecular structures. Optimized molecular structures for studied molecular structures are obtained using the DFT/B3LYP/6-31G (d, p) method.

Spectroscopic Behavior and Photophysical Parameters of 2-(Acetoxymethyl)-6-(1,2,4-triazinylaminodihydroquinazolinyl)tetrahydropyran Derivative in Different Solid Hosts.

Optical and photophysical properties of 6-substituted-1,2,4-Triazine fluorescent derivative dye doped in silicate based sol-gel, homopolymer of methyl methacrylate (PMMA), and copolymer (MMA/diethylene glycol dimethacrylate) (DEGDMA) were investigated. The pores of different hosts and caging of the dye were found to effect on the parameters such as molar absorptivity, cross sections of singlet-singlet electronic absorption and emission spectra, excited state lifetime, quantum yield of fluorescence. The dipole moment of electronic transition, the length of attenuation and oscillator strength of electronic transition from So → S1 have been calculated.

Laser performance and investigation of the optimal density functional and the dependence of the basis sets for (E, E)-2,5-bis (3,4-dimethoxystyryl) pyrazine (BDP) molecule.

This manuscript includes some photophysical parameters and some optical properties such as absorption and emission spectra of the (E, E)-2,5-bis (3,4-dimethoxystyryl) pyrazine (BDP) by applying sol-gel and copolymer matrices. The BDP molecular structure is incorporated in sol-gel matrix and copolymer of methyl methacrylate (MMA) and 2-hydroxyethyl methacrylate (HEMA). In case of sol-gel matrix, the BDP molecular structure has higher quantum yield in addition to photostability maxima.

Spectral Behavior and Photophysical Parameters of Dihydrophenanthro[9,10-e][1,2,4]Triazine Derivative Dyes in Sol-Gel and Methyl Methacrylate Polymer Matrices.

This paper deals with the optical and photophysical properties of dihydrophenanthro[9,10-e][1,2,4]triazine fluorescent dyes doped in Silicate based sol-gel and homo-poly methyl methacrylate (PMMA). Solid hosts were found to effect on the optical and photophysical parameters such as molar absorptivity, cross sections of singlet-singlet electronic absorption and emission spectra, excited state lifetime, quantum yield of fluorescence. The dipole moment of electronic transition, the length of attenuation and oscillator strength of electronic transition from S → S have been calculated.

Performance of chitosan polymer as platform during sensors fabrication and sensing applications.

Chitosan is an important polymer produced from deacetylation of several sea and insects crusts. Due to its environmental fate and biological biocompatibility, it can be used in several biological and environmental applications. Sensing of biological compounds in human bodies and also in serum, blood, and different body fluids has found an important application instead of direct determination of the body fluids using complicated tools.

Effectuality of chitosan biopolymer and its derivatives during antioxidant applications.

Chitosan is an important biopolymer produced from the deacetylation of several seas and insect crusts. Due to its environmental fate and biological biocompatibility, it can be used in several biological and environmental applications. In this review, the potential application of chitosan biopolymer was reviewed due to it is considered an environmental, sustainable, and biologically safe plate form for producing several antioxidants.

Spectroscopic and Photo-Physical Properties of Near-IR Laser Dye in Novel Benign Green Solvents.

IR-792 as near IR (NIR) laser dye was dissolved with different concentrations in two types of ionic liquids (ILs) of different anion and cation, 1-Ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide (EMIM TFSI) & 1-Butyl-3-methylimidazolium tetrafluoroborate (BMIM BF), as the benign green solvent and in methanol (MeOH) as a standard solvent. The behavior of fluorescence of IR-792 dye was studied. The fluorescence of IR-792 dissolved in the ILs was heavily compared to organic solvent.

Advancement on modification of chitosan biopolymer and its potential applications.

Chitosan is the second abundant biopolymer present on earth after cellulose. Chitosan is extracted from the shells of shrimp and other crustaceans. Several methods were reported for its extraction, but the most commercial is the deacetylation of chitin.

Optical, photo physical parameters and photo stability of 6-Substituted-1, 2, 4-Triazine mono glucosyl derivative to act as a laser dye in various solvents.

The optical properties of a visible absorption range6-Substituted-1, 2, 4-Triazine mono glucosyl fluorescent derivative dye, such as absorption spectra, emission spectra in different solvents, were experimentally investigated. As well, some important photo physical parameters such as extinction coefficient (ε), cross-sections of the absorption (σ) and the emission (σ), quantum yield (ф), fluorescence lifetime, oscillator strength (f), the dipole moment (μ), decay rate radiative constant (k), energy yield of fluorescence (E) and the length of attenuation Λ (λ) were assessed. The ground-state (μ) and excited-state (μ) dipole moments by solvatochromic correlations method were reported.

Spectroscopic Study of Solvent Polarity on the Optical and Photo-Physical Properties of Novel 9,10-bis(coumarinyl)anthracene.

Novel 7,7'-((anthracene-9,10-diylbis(methylene))bis(oxy))bis(4-methyl-2H-chromen-2-one) (BisCA) was prepared as fluorescent probe. The chemical structure of the novel BisCA was confirmed by spectroscopic data as well as elemental analyses. The solvatochromic characteristics of the new proble and its precursors were investigated in different solvents including, ethanol, DMF and toluene as protic polar, aprotic polar and non-polar solvents, respectively.

Laser Performance of Some Oxazole Laser Dyes in Restricted Matrices.

This article reports the optical properties such as absorption profile, molar absorptivity, fluorescence profile and photo-physical parameters such as dipole moment, oscillator strength, fluorescence quantum yields, fluorescence lifetimes, laser performance and finally photostability of 2,5-Bis(5-tert-butyl-benzoxazol-2-yl)thiophene (BBOT),1,4-Bis(5-phenyl-2-oxazolyl)benzene (POPOB), 5-diphenyel-oxazole (PPO) laser dyes in different restricted hosts. (BBOT), (POPOB) and (PPO) are embedded in transparent silica-based nanoporous sol-gel glass and copolymer matrix of methyl methacrylate (MMA) and 2-hydroxyethyl methacrylate (HEMA). The absorption and fluorescence properties of these laser dyes in sol-gel glass matrices are compared with their respective properties in copolymer host.

Fluorescein dye derivatives and their nanohybrids: Synthesis, characterization and antimicrobial activity.

Fluorescein (resorcinolphthalein) is a synthetic organic photoactive dye compound soluble in water, alcohol and polar solvents. It is widely used as a fluorescent tracer in medicinal and biological applications and tumor infected tissues tracer. In this study, fluorescein (F) was condensed by five coupling agents namely: p,p-phenylene diamine, p-hydroxy aniline, o-hydroxy aniline, p-methoxy aniline and p-methyl aniline in a molar ratio of 2(F):1 (coupling agent).

Synthesis and implementation of nano-chitosan and its acetophenone derivative for enhanced removal of metals.

In the present study, nano-chitosan (Nano-Ch) was synthesized by ionic gelation of chitosan/tripolyphosphate system and successfully modified with acetophenone via Schiff's base condensation to produce nano-chitosan-modified-actophenone (Nano-Ch-Ac). The produced nano-materials were characterized by FT-IR, SEM, HR-TEM and TGA techniques. The average particle sizes were found in the range of 5.

Fluorescence enhancement monitoring of pyrromethene laser dyes by metallic Ag nanoparticles.

Fluorescence enhancement monitoring of pyrromethene laser dyes using their complexation with Ag nanoparticles (Ag NPs) was studied. The size of the prepared Ag NPs was determined by transmission electron spectroscopy and UV/Vis absorption spectroscopy. Mie theory was also used to confirm the size of NPs theoretically.