In-situ generation of iron activated percarbonate for sustainable sludge dewatering.

Effective dewatering of sewage sludge could potentially address the issues of high energy consumption and large carbon footprint inherent in the sludge treatment process, advancing toward carbon neutrality in environmental remediation. Yet, the surface hydrophilic characteristics and water-holding interfacial affinity in sludge led to dwindled sludge-water separation performance. Here, the integration of in-situ generation of iron from zero-valent scrap iron (ZVSI) and sodium percarbonate (SPC) was attempted to attenuate the water-retaining interfacial affinity within sludge, thus achieving superior sludge dewatering performance.

A highly efficient process to enhance the bioleaching of spent lithium-ion batteries by bifunctional pyrite combined with elemental sulfur.

Bioleaching technologies have been shown to be an environmentally friendly and economically beneficial tool for extracting metals from spent lithium-ion batteries (LIBs). However, conventional bioleaching methods have exhibited low efficiency in recovering metals from spent LIBs. Therefore, relied on the sustainability principle of using waste to treat waste, this study employed pyrite (FeS) as an energy substance with reducing properties and investigated its effects in combination with elemental sulfur (S) or FeSO on metals bioleaching from spent LIBs.

Triclocarban transformation and removal in sludge conditioning using chalcopyrite-triggered percarbonate treatment.

Herein, a facile combination approach of chalcopyrite and sodium percarbonate (CuFeS+ SPC) was established to augment both TCC removal efficiency and sludge dewatering. Results showed that utilizing the CuFeS dosage of 600 mg/g total solids (TS) under the optimal condition, along with the SPC dosage of 12.5 mg/g TS, an initial pH of 4.

Comprehensive insights into the gallic acid assisted bioleaching process for spent LIBs: Relationships among bacterial functional genes, Co(III) reduction and metal dissolution behavior.

Despite the growing demand for resource recovery from spent lithium-ion batteries (LIBs) by bioleaching, low Co leaching efficiency has hindered the development and application of this technology. Therefore, a novel process was designed, combining gallic acid (GA) and mixed culture bioleaching (MCB), to enhance the removal of metals from spent LIBs. Results indicated that the GA + MCB process achieved 98.

Preparation and modification of bagasse biochar unveiling ofloxacin wastewater adsorption.

Currently, ofloxacin (OFX) is widely used in various medical treatment and aquaculture industries. However, its production and application produces waste which pollutes the natural environment and causes ecological damage. The application of biochar is a crucial way to remove OFX antibiotics from wastewater.

Bearing Fault Feature Extraction Method Based on Enhanced Differential Product Weighted Morphological Filtering.

Aimed at the problem of fault characteristic information bearing vibration signals being easily submerged in some background noise and harmonic interference, a new algorithm named enhanced differential product weighted morphological filtering (EDPWMF) is proposed for bearing fault feature extraction. In this method, an enhanced differential product weighted morphological operator (EDPWO) is first constructed by means of infusing the differential product operation and weighted operation into four basic combination morphological operators. Subsequently, aiming at the disadvantage of the parameter selection of the structuring element (SE) of EDPWO depending on artificial experience, an index named fault feature ratio (FFR) is employed to automatically determine the flat SE length of EDPWO and search for the optimal weighting correlation factors.

Feasibility of reduced iron species for promoting Li and Co recovery from spent LiCoO batteries using a mixed-culture bioleaching process.

The recovery of metals from spent LiCoO batteries (SLBs) is essential to avoid resource wastage and the production of hazardous waste. However, the major challenge in regard to recovering metals from SLBs using traditional bioleaching is the low Co yield. To overcome this issue, a mixed culture of Acidithiobacillus caldus and Sulfobacillus thermosulfidooxidans was designed for use in SLBs leaching in this study.

A designed moderately thermophilic consortia with a better performance for leaching high grade fine lead-zinc sulfide ore.

Unwieldy fine sulfide ores are produced during mining; without being appropriately disposed of, they can cause environmental pollution and waste resources. This study investigated the leaching performance of a moderately thermophilic consortia (Leptospirillum ferriphilum + Acidithiobacillus caldus + Sulfobacillus benefaciens) for fine lead-zinc sulfide raw ore. The results showed this microbial community created a low pH, high ORP, and high cell concentration environment for mineral leaching, improving bioleaching efficiency.

Rolling Bearing Fault Diagnosis Based on VMD-MPE and PSO-SVM.

The goal of the paper is to present a solution to improve the fault detection accuracy of rolling bearings. The method is based on variational mode decomposition (VMD), multiscale permutation entropy (MPE) and the particle swarm optimization-based support vector machine (PSO-SVM). Firstly, the original bearing vibration signal is decomposed into several intrinsic mode functions (IMF) by using the VMD method, and the feature energy ratio (FER) criterion is introduced to reconstruct the bearing vibration signal.

Dewaterability improvement and environmental risk mitigation of waste activated sludge using peroxymonosulfate activated by zero-valent metals: Fe vs. Al.

The stabilization and dewaterability of waste activated sludge (WAS) are essential factors for downstream disposal or reuse. Herein, two types of zero-valent metals, zero-valent iron (Fe) and zero-valent aluminum (Al), were compared for their ability to activate peroxymonosulfate (PMS) during the WAS conditioning process, with the effects of PMS activation by these two metals on WAS dewaterability and the potential environmental risks evaluated. Results showed that compared to Al/PMS treatment, Fe/PMS treatment achieved superior WAS dewaterability and reduced operational costs.

Advanced treatment of dye wastewater using a novel integrative Fenton-like/MnO-filled upward flow biological filter bed system equipped with modified ceramsite.

The deposal of residual hydrogen peroxide (HO) in Fenton-like system and the requirement of oxygen in bioreactor are essential parts for the treatment of integrative Fenton-like/bioreactor. A novel low-cost integrative Fenton-like and MnO-filled upward flow biological filter bed (Fenton-like/MBFB) equipped with the modified ceramsite was constructed to evaluate the main properties and catalytic activity of modified ceramsite, and the optimal conditions of integrative system and compare integrative and traditional systems. In this study, the Fenton-like reactor with modified ceramsite had higher catalytic ability whose Acid Orange 7 (AO7) degradation efficiency reached to 79.

Bioleaching for detoxification of waste flotation tailings: Relationship between EPS substances and bioleaching behavior.

The production of large volumes of waste flotation tailings results in environmental pollution and presents a major ecological and environmental risk. This study investigates bioleaching of waste flotation tailings using Acidithiobacillus ferrooxidans. The experiments were performed with 5.

High-level waste activated sludge dewaterability using Fenton-like process based on pretreated zero valent scrap iron as an in-situ cycle iron donator.

A novel, recyclable, and rapid pre-ultrasound-thermal-acid-washed zero valent scrap iron/hydrogen peroxide (UTA-ZVSI/HO) method has been developed to effectively enhance waste activated sludge (WAS) dewaterability. The effects of UTA ultrasound densities, UTA temperature, newly generated iron solution, HO concentrations, and WAS conditioning time on the WAS dewaterability were investigated using a bench-scale system. Results indicated that the UTA-ZVSI/HO treatment significantly improved the WAS dewaterability.

Mechanism of zero valent iron and anaerobic mesophilic digestion combined with hydrogen peroxide pretreatment to enhance sludge dewaterability: Relationship between soluble EPS and rheological behavior.

This study proposed a novel two-step conditioning strategy to enhance activated sludge (AS) dewatering performance. The method involved a zero valent iron (ZVI), anaerobic mesophilic digestion (AMD) process, and hydrogen peroxide (HO) oxidation. Response surface methodology (RSM) was applied to achieve optimum dewatering conditions.

A new strategy on biomining of low grade base-metal sulfide tailings.

This study investigated the effect of designed microbial consortia on biomining of low grade base-metal sulfide tailings. The results show the amount of recycled metals were equal if the tailings were leached by mixed cultures of Leptospirillum ferriphilum and Acidithiobacillus thiooxidans at three different ratios or by pure culture of L. ferriphilum, which was better than the pure culture of Acidithiobacillus ferrooxidans.

Optimization of kinetics and operating parameters for the bioleaching of heavy metals from sewage sludge, using co-inoculation of two Acidithiobacillus species.

This study explores the potential for synchronous extraction of Cu, Cr, Ni and Zn during sewage sludge bioleaching processes, using three types of bacterial cultures: a pure culture of Acidithiobacillus ferrooxidans (A. ferrooxidans); a pure culture of Acidithiobacillus thiooxidans (A. thiooxidans); and a mixed culture of A.

Removal of metals from lead-zinc mine tailings using bioleaching and followed by sulfide precipitation.

Mine tailings often contain significant amounts of metals and sulfide, many traditional operations used to minerals was not as good as those currently available. This study investigated metals removal from lead-zinc mine tailings using bioleaching and followed by sulfide precipitation. Metals were dissolved from the tailings by the bacteria in a bioleaching reactor.

Bioleaching combined brine leaching of heavy metals from lead-zinc mine tailings: Transformations during the leaching process.

During the process of bioleaching, lead (Pb) recovery is low. This low recovery is caused by a problem with the bioleaching technique. This research investigated the bioleaching combination of bioleaching with brine leaching to remove heavy metals from lead-zinc mine tailings.

The effect of additives on migration and transformation of gaseous pollutants in the vacuum pyrolysis process of waste printed circuit boards.

The effect of six additives (CaCO, HZSM-5, CaO, AlO, FeOOH and Ca(OH)) on the generation, migration, transformation and escaping behaviours of typical gaseous pollutants in the pyrolysis process were studied by vacuum pyrolysis experiments on epoxy resin powder from waste printed circuit boards with tube furnace. The results show that the additives AlO, CaO, Ca(OH) and FeOOH could reduce the yield of the gas phase. The removal rates of pollutants, such as benzene, toluene, ethyl benzene, phenol, p-xylene, HBr, NO and SO in the gaseous products, has changed variously with the increasing percentage of the above additives.

Disodium N,N-bis-(dithiocarboxy)ethanediamine: synthesis, performance, and mechanism of action toward trace ethylenediaminetetraacetic acid copper (II).

A new effective multi-dithiocarbamate heavy metal precipitant, disodium N,N-bis-(dithiocarboxy) ethanediamine (BDE), was synthesized by mixing ethanediamine with carbon disulfide under alkaline conditions, and it was utilized for removing trace ethylenediaminetetraacetic acid copper (II) (EDTA-Cu) from wastewater. Its structure was confirmed by ultraviolet spectra, Fourier transform infrared spectra, scanning electron microscopy, thermogravimetric analysis, and elemental analysis. The removal performance of EDTA-Cu by BDE was evaluated according to BDE dosage, initial concentration, pH, and reaction time through single-factor experiments.