Single Precursor-Derived Sub-1 nm MoCo Bimetallic Particles Decorated on Phosphide-Carbon Nitride Framework for Sustainable Hydrogen Generation.

The strategic design and fabrication of efficient electrocatalysts are pivotal for advancing the field of electrochemical water splitting (EWS). To enhance EWS performance, integrating non-noble transition metal catalysts through a cooperative double metal incorporation strategy is important and offers a compelling alternative to conventional precious metal-based materials. This study introduces a novel, straightforward, single-step process for fabricating a bimetallic MoCo catalyst integrated within a three-dimensional (3D) nanoporous network of N, P-doped carbon nitride derived from a self-contained precursor.

Tunning the wettability of the PVDF membrane using the PVA-stabilized TA-UiO-66-NH2 MOF membranes to separate layered oil-water mixture and surfactant-stabilized emulsion.

This study introduces a UiO-66-NH2/Tannic acid/Polyvinylidene fluoride (UTP) composite membrane for efficient oil-water separation. Pristine polyvinylidene fluoride (PVDF) membranes, due to their hydrophobic nature, tend to foul during oil-in-water emulsion separation. By incorporating the metal-organic framework (MOF) UiO-66-NH2 and stabilizing it with tannic acid (TA) and polyvinyl alcohol (PVA), the membrane's hydrophilicity and antifouling properties were significantly enhanced.

Visible light driven (VLD) reduced TiO nanocatalysts designed by inorganic and organic reducing agent-mediated solvothermal methods for electrocatalytic and photocatalytic applications.

This work presents a comparative study on the structural, optical and electrochemical characteristics of visible light driven (VLD) reduced titanium dioxide (TiO ) nanocatalysts synthesized inorganic and organic synthetic routes. X-ray diffraction (XRD) patterns, Raman spectra and X-ray absorption fine structure (XAFS) analyses reflected anatase phase titania. Whereas, the quantitative EXAFS fit and XANES analysis revealed structural distortion due to the presence of oxygen and titanium vacancies with low valent Ti states in anatase lattices of certain nanocatalysts, which subsequently leads to better electrochemical and photocatalytic activities.

Advancing Catalysts by Nanoconfinement and Catalysis for Enhanced Hydrogen Production from Magnesium Borohydride: A Review.

Hydrogen storage in solid-state materials represents a promising avenue for advancing hydrogen storage technologies, driven by their potential for high efficiency, reduced risk, and cost-effectiveness. Among the employed materials, magnesium borohydride (Mg(BH)) stands out for its exceptional characteristics, with a gravimetric capacity of 14.9 wt% and a volumetric hydrogen density capacity of 146 kg/m.

Efficient Adsorption of Methylene Blue Using a Hierarchically Structured Metal-Organic Framework Derived from Layered Double Hydroxide.

The growing concerns about environmental pollution, particularly water pollution, are causing an increasing alarm in modern society. One promising approach to address this issue involves engineering existing materials to enhance their effectiveness. A one-step solvothermal reconstruction approach was used to build an eco-friendly two-dimensional (2D) AlNiZn-LDH/BDC MOF composite.

Engineering Mn-Doped CdS Thin Films Through Chemical Bath Deposition for High-Performance Photoelectrochemical Water Splitting.

Doping conventional materials with a second element is an exciting strategy for enhancing catalytic performance via electronic structure modifications. Herein, Mn-doped CdS thin films were successfully synthesized with the aid of the chemical bath deposition (CBD) by varying the pH value (8, 10, and 12) and the surfactant amount (20, 40, 60 mg). Different morphologies like nano-cubes, nanoflakes, nano-worms, and nanosheets were obtained under different deposition conditions.

Ferrocene-Boosted Nickel Sulfide Nanoarchitecture for Enhanced Alkaline Water Splitting.

Enhanced electrocatalysts that are cost-effective, durable, and derived from abundant resources are imperative for developing efficient and sustainable electrochemical water-splitting systems to produce hydrogen. Therefore, the design and development of non-noble-based catalysts with more environmentally sustainable alternatives in efficient alkaline electrolyzers are important. This work reports ferrocene (Fc)-incorporated nickel sulfide nanostructured electrocatalysts (Fc-NiS) using a one-step facile solvothermal method for water-splitting reactions.

Novel and efficient Bi-doped CoTe nano-solar evaporators embedded on leno weave cotton gauze for efficient solar-driven desalination.

Solar-driven desalination is considered an alternative to the conventional desalination due to its nearly zero carbon footprint and ease of operating in remote areas. Water can be purified wherever sunlight is available, providing a viable solution to water shortage. Metal chalcogenide-based materials are revolutionary for solar evaporators due to their excellent photothermal conversion efficiency, facile synthesis methods, stability, and low cost.

Recent trends in wastewater treatment by using metal-organic frameworks (MOFs) and their composites: A critical view-point.

Respecting the basic need of clean and safe water on earth for every individual, it is necessary to take auspicious steps for waste-water treatment. Recently, metal-organic frameworks (MOFs) are considered as promising material because of their intrinsic features including the porosity and high surface area. Further, structural tunability of MOFs by following the principles of reticular chemistry, the MOFs can be functionalized for the high adsorption performance as well as adsorptive removal of target materials.

Enhanced Electrocatalytic Activity of Amorphized LaCoO for Oxygen Evolution Reaction.

Amorphous inorganic perovskites have attracted significant attention as efficient electrocatalysts due to their unique structural flexibility and good catalytic activity. In particular, the disordered structure and a surface rich in defects such as oxygen vacancies can contribute to the superior electrocatalytic activity of amorphous oxides compared to their crystalline counterpart. In this work, we report the synthesis of LaCoO, followed by an amorphization process through urea reduction with tailored modifications.

Synthesis of Electrical Conductive Metal-Organic Frameworks for Electrochemical Applications.

Electrical conductivity is very important property of nanomaterials for using wide range of applications especially energy applications. Metal-organic frameworks (MOFs) are notorious for their low electrical conductivity and less considered for usage in pristine forms. However, the advantages of high surface area, porosity and confined catalytic active sites motivated researchers to improve the conductivity of MOFs.

Recent Advances on Nitrogen-Doped Porous Carbons Towards Electrochemical Supercapacitor Applications.

Due to ever-increasing global energy demands and dwindling resources, there is a growing need to develop materials that can fulfil the World's pressing energy requirements. Electrochemical energy storage devices have gained significant interest due to their exceptional storage properties, where the electrode material is a crucial determinant of device performance. Hence, it is essential to develop 3-D hierarchical materials at low cost with precisely controlled porosity and composition to achieve high energy storage capabilities.

NiCoO nano-needles as an efficient electro-catalyst for simultaneous water splitting and dye degradation.

Developing an efficient and non-precious bifunctional catalyst capable of performing water splitting and organic effluent degradation in wastewater is a great challenge. This article reports an efficient bifunctional nanocatalyst based on NiCoO, synthesized using a simple one-pot co-precipitation method. We optimized the synthesis conditions by varying the synthesis pH and sodium dodecyl sulfate (SDS) concentrations.

A facile two-step hydrothermal preparation of 2D/2D heterostructure of BiWO/WS for the efficient photodegradation of methylene blue under sunlight.

A facile two-step hydrothermal method was successfully used to prepare a photocatalyst BiWO/WS heterojunction for methyl blue (MB) photodegradation. Fabricated photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray analysis (EDX), and X-ray photoelectron spectroscopy (XPS). Band gap measurements were carried out by diffuse reflectance spectroscopy (DRS).

Chemistry Aspects and Designing Strategies of Flexible Materials for High-Performance Flexible Lithium-Ion Batteries.

In recent years, flexible and wearable electronics such as smart cards, smart fabrics, bio-sensors, soft robotics, and internet-linked electronics have impacted our lives. In order to meet the requirements of more flexible and adaptable paradigm shifts, wearable products may need to be seamlessly integrated. A great deal of effort has been made in the last two decades to develop flexible lithium-ion batteries (FLIBs).

Effect of (Sm, In) Doping on the Electrical and Thermal Properties of SbTe Microstructures.

Doped SbTe narrow-band-gap semiconductors have been attracting considerable attention for different electronic and thermoelectric applications. Trivalent samarium (Sm)- and indium (In)-doped SbTe microstructures have been synthesized by the economical solvothermal method. Powder X-ray diffraction (PXRD) was used to verify the synthesis of single-phase doped and undoped SbTe and doping of Sm and In within the crystal lattice of SbTe.

Facile Synthesis of PdO.TiO Nanocomposite for Photoelectrochemical Oxygen Evolution Reaction.

The rapid depletion of fossil fuels and environmental pollution has motivated scientists to cultivate renewable and green energy sources. The hydrogen economy is an emerging replacement for fossil fuels, and photocatalytic water splitting is a suitable strategy to produce clean hydrogen fuel. Herein, the photocatalyst (PdO.

Recent Advances in Transition Metal Tellurides (TMTs) and Phosphides (TMPs) for Hydrogen Evolution Electrocatalysis.

The hydrogen evolution reaction (HER) is a developing and promising technology to deliver clean energy using renewable sources. Presently, electrocatalytic water (HO) splitting is one of the low-cost, affordable, and reliable industrial-scale effective hydrogen (H) production methods. Nevertheless, the most active platinum (Pt) metal-based catalysts for the HER are subject to high cost and substandard stability.

Recent progress in the design, synthesis and applications of chiral metal-organic frameworks.

Chiral Metal-Organic Frameworks (CMOFs) are unique crystalline and porous class of materials which is composed of organic linkers and metal ions. CMOFs surpass traditional organic and inorganic porous materials because of their tunable shape, size, functional diversity, and selectivity. Specific applications of CMOFs may be exploited by introducing desired functional groups.

Improving selective hydrogenation of carbonyls bond in α, β-unsaturated aldehydes over Pt nanoparticles encaged within the amines-functionalized MIL-101-NH.

The high selectivity in the hydrogenation reactions of α, β-unsaturated aldehydes is always a demanding task. Precious Pt-based catalysts play a pivotal role in selective catalytic hydrogenation of α, β-unsaturated aldehydes, but controlling the selectivity is still a great challenge. Herein, the Pt nanoparticles were encaged within the mesopores of amines (-NH) functionalized MOFs via polyol reduction method as an efficient approach to enhance the selectivity of desired carbonyls bond reduction.

Hydrothermal synthesis and characterization of transition metal (Mn/Fe/Cu) co-doped cerium oxide-based nano-additives for potential use in the reduction of exhaust emission from spark ignition engines.

The goal of this work was to synthesize new cerium oxide-based nano-additives to minimise emissions from spark ignition (SI) engines fueled with gasoline blends, such as carbon monoxide (CO), unburned hydrocarbons (HC) and oxides of nitrogen (NO ). To investigate the effect of transition metal dopants on their respective catalytic oxidation activity, nano-sized CeO catalysts co-doped with Mn, Fe, Cu and Ag ions were successfully produced by a simple hydrothermal technique. The synthesis of nano-catalysts with cubic fluorite geometry was confirmed by XRD data.

Ag Functionalized InO Derived From MIL-68(In) as an Efficient Electrochemical Glucose Sensor.

In this study, Ag@InO modified nickel foam (NF) was reported for its role as a non-enzymatic glucose sensor. Ag@InO was prepared by a simple two-step method; preparation of a metal-organic framework (MOF) MIL-68(In) by solvothermal method, entrapment of Ag + by adding AgNO then drying it for 2 h to complete the entrapment process and subsequent calcination at 650°C for 3 h. The Ag@InO modified NF was employed as a non-enzymatic glucose sensor to determine glucose concentrations in an alkaline medium.

Impedance Spectroscopy Analysis of PbSe Nanostructures Deposited by Aerosol Assisted Chemical Vapor Deposition Approach.

This research endeavor aimed to synthesize the lead (II) diphenyldiselenophosphinate complex and its use to obtain lead selenide nanostructured depositions and further the impedance spectroscopic analysis of these obtained PbSe nanostructures, to determine their roles in the electronics industry. The aerosol-assisted chemical vapor deposition technique was used to provide lead selenide deposition by decomposition of the complex at different temperatures using the glass substrates. The obtained films were revealed to be a pure cubic phase PbSe, as confirmed by X-ray diffraction analysis.

Impedance Spectroscopic Study of Nickel Sulfide Nanostructures Deposited by Aerosol Assisted Chemical Vapor Deposition Technique.

This research aims to synthesize the (di-butyldithiophosphinato) nickel (II) complex [Ni(iBuPS)] to be employed as a substrate for the deposition of nickel sulfide nanostructures, and to investigate its dielectric and impedance characteristics for applications in the electronic industry. Various analytical tools including elemental analysis, mass spectrometry, IR, and TGA were also used to further confirm the successful synthesis of the precursor. NiS nanostructures were grown on the glass substrates by employing an aerosol assisted chemical vapor deposition (AACVD) technique via successful decomposition of the synthesized complex under variable temperature conditions.