Molybdenum(VI) dioxo complexes employing Schiff base ligands with an intramolecular donor for highly selective olefin epoxidation.

Reaction of [MoO(2)(η(2)-tBu(2)pz)(2)] with Schiff base ligands HL(X) (X = 1-5) gave molybdenum(VI) dioxo complexes of the type cis-[MoO(2)(L(X))(2)] as yellow to light brown solids in moderate to good yields. All ligands coordinate via its phenolic O atom and the imine N atom in a bidentate manner to the metal center. The third donor atom (R(2) = OMe or NMe(2)) in the side chain in complexes 1-4 is not involved in coordination and remains pendant.

Dioxomolybdenum(VI) complexes with pyrazole based aryloxide ligands: synthesis, characterization and application in epoxidation of olefins.

Synthesis, characterization, and epoxidation chemistry of four new dioxomolybdenum(VI) complexes [MoO(2)(L)(2)] (1-4) with aryloxide-pyrazole ligands L = L1-L4 is described. Catalysts 1-4 are air and moisture stable and easy to synthesize in only three steps in good yields. All four complexes are coordinated by the two bidentate ligands in an asymmetric fashion with one phenoxide and one pyrazole being trans to oxo atoms, respectively.

Molybdenum(VI) dioxo and oxo-imido complexes of fluorinated β-ketiminato ligands and their use in OAT reactions.

Substitution of a methyl by a trifluoromethyl moiety in well-known β-ketimines afforded the ligands (Ar)NC(Me)CH(2)CO(CF(3)) (HL(H), Ar = C(6)H(5); HL(Me), A r= 2,6-Me(2)C(6)H(3); HL(iPr), Ar = 2,6-(i)Pr(2)C(6)H(3)). Subsequent complexation to the [MoO(2)](2+) core leads to the formation of novel complexes of general formula [MoO(2)(L(R))(2)] (R = H, 1; R = Me, 2; R = iPr, 3). For reasons of comparison the oxo-imido complex [MoO(N(t)Bu)(L(Me))(2)] (4) has also been synthesized.

Unusual nonoctahedral geometry with molybdenum oxoimido complexes containing η2-pyrazolate ligands.

The preparation and oxygen-atom-transfer (OAT) reactivity of oxoimido complexes [MoO(N-t-Bu)(t-Bu(2)-4-Rpz)(2)] [where R = H (1), Br (2), and Me (3); t-Bu(2)pz = 3,5-di-tert-butylpyrazolate] are reported. The reaction of the potassium salt of the respective pyrazolate ligands and the molybdenum oxoimido precursor, [MoO(N-t-Bu)Cl(2)(dme)] (dme = dimethoxyethane), in toluene afforded complexes 1-3 in good yields. The complexes were fully characterized by (1)H and (13)C NMR and IR spectroscopy, mass spectrometry, elemental analysis, and single-crystal X-ray crystallography.

Pyridazine based scorpionate ligand in a copper boratrane compound.

Reaction of potassium tris(mercapto-tert-butylpyridazinyl)borate K[Tn(tBu)] with copper(II) chloride in dichloromethane at room temperature led to the diamagnetic copper boratrane compound [Cu{B(Pn(tBu))(3)}Cl] (Pn = pyridazine-3-thionyl) (1) under activation of the B-H bond and formation of a Cu-B dative bond. In contrast to this, stirring of the same ligand with copper(I) chloride in tetrahydrofuran (THF) gave the dimeric compound [Cu{Tn(tBu)}](2) (2) where one copper atom is coordinated by two sulfur atoms and one hydrogen atom of one ligand and one sulfur of the other ligand. Hereby, no activation of the B-H bond occurred but a 3-center-2-electron B-H···Cu bond is formed.

Pyridazine- versus pyridine-based tridentate ligands in first-row transition metal complexes.

A series of first-row transition metal complexes with the unsymmetrically disubstituted pyridazine ligand picolinaldehyde (6-chloro-3-pyridazinyl)hydrazone (PIPYH), featuring an easily abstractable proton in the backbone, was prepared. Ligand design was inspired by literature-known picolinaldehyde 2-pyridylhydrazone (PAPYH). Reaction of PIPYH with divalent nickel, copper, and zinc nitrates in ethanol led to complexes of the type [Cu(II)(PIPYH)(NO(3))(2)] (1) or [M(PIPYH)(2)](NO(3))(2) [M = Ni(II) (2) or Zn(II) (3)].

Mechanistic insight into olefin epoxidation catalyzed by rhenium(V) oxo complexes that contain pyridazine-based ligands.

Three novel tridentate pyridazine phenolate ligands were prepared in high yields by Schiff-base condensation of salicylic aldehyde with various pyridazine hydrazines (substituent R in the 6 position: R = Cl (HL(Cl)), (t)Bu (HL((t)Bu)), or tol (HL(tol))). They react with [ReOCl(3)(OPPh(3))(SMe(2))] to form rare mononuclear trans-dichloro oxo complexes of general formula [ReOCl(2)(L(R))] with R = tol (1), (t)Bu (2), or Cl (3) as confirmed by single-crystal X-ray diffraction analyses of 1 and 2. They were found to be catalysts for oxidation of cyclooctene to the corresponding epoxide by tert-butyl hydroperoxide (TBHP).

Faster oxygen atom transfer catalysis with a tungsten dioxo complex than with its molybdenum analog.

The synthesis and characterization of a series of molybdenum ([MoO(2)Cl(L(n))]; L(1) (1), L(2) (3)) and tungsten ([WO(2)Cl(L(n))]; L(1) (2), L(2) (4)) dioxo complexes (L(1) = 1-methyl-4-(2-hydroxybenzyl)-1,4-diazepane and L(2) = 1-methyl-4-(2-hydroxy-3,5-di-tert-butylbenzyl)-1,4-diazepane) of tridentate aminomonophenolate ligands HL(1) and HL(2) are reported. The ligands were obtained by reductive amination of 1-methyl-1,4-diazepane with the corresponding aldehyde. Complexes 3 and 4 were obtained by the reaction of [MO(2)Cl(2)(dme)(n)] (M = Mo, n = 0; W, n = 1) with the corresponding ligand in presence of a base, whereas for the preparation of 1 and 2 the ligands were deprotonated by KH prior to the addition to the metal.

Oxorhenium(V) complexes with pyrazole based aryloxide ligands and application in olefin epoxidation.

We synthesized and characterized a set of new oxorhenium(V) complexes coordinated by various pyrazole containing phenol (L1-L3) and naphthol ligands (L4-L7). Depending on the starting material, we were able to selectively synthesize monosubstituded or disubstituted complexes of the type [ReOBr(2)L(PPh(3))] (1-7; L = L1-L7) and [ReOClL(2)] (L = L1 8; L2 9; L4 10; L6 11), respectively. All complexes are stable to air and moisture, both in solid state as well as in solution.

Novel pyridazine based scorpionate ligands in cobalt and nickel boratrane compounds.

Heating of 6-methylpyridazine-3-thione (HPn(Me)) and 6-tert-butylpyridazine-3-thione (HPn(tBu)) with potassium borohydride in diphenylmethane in a 3:1 ratio gave two new scorpionate ligands K[HB(Pn(Me))(3)] and K[HB(Pn(tBu))(3)]. Single crystal X-ray diffraction analysis of the methyl derivative K[HB(Pn(Me))(3)] revealed a dimeric species with one potassium atom coordinated by six sulfur atoms of two scorpionate ligands and a second potassium atom coordinated by three nitrogen atoms of one of the two ligands as well as by three water molecules. The reaction of K[HB(Pn(tBu))(3)] with nickel(II) chloride or cobalt(II) chloride in CH(2)Cl(2) led to the new boratrane compounds [M{B(Pn(tBu))(3)}Cl] (M = Ni 1, Co 3) where a formal reduction of the metal ions to Ni(I) and Co(I), respectively, and activation of the B-H bond occurred.

Mechanistic insight into the reactivity of oxotransferases by novel asymmetric dioxomolybdenum(VI) model complexes.

The asymmetric molybdenum(VI) dioxo complexes of the bis(phenolate) ligands 1,4-bis(2-hydroxybenzyl)-1,4-diazepane, 1,4-bis(2-hydroxy-4-methylbenzyl)-1,4-diazepane, 1,4-bis(2-hydroxy-3,5-dimethylbenzyl)-1,4-diazepane, 1,4-bis(2-hydroxy-3,5-di-tert-butylbenzyl)-1,4-diazepane, 1,4-bis(2-hydroxy-4-flurobenzyl)-1,4-diazepane, and 1,4-bis(2-hydroxy-4-chlorobenzyl)-1,4-diazepane (H(2)(L1)-H(2)(L6), respectively) have been isolated and studied as functional models for molybdenum oxotransferase enzymes. These complexes have been characterized as asymmetric complexes of type [MoO(2)(L)] 1-6 by using NMR spectroscopy, mass spectrometry, elemental analysis, and electrochemical methods. The molecular structures of [MoO(2)(L)] 1-4 have been successfully determined by single-crystal X-ray diffraction analyses, which show them to exhibit a distorted octahedral coordination geometry around molybdenum(VI) in an asymmetrical cis-β configuration.

Replacement of an oxo by an imido group in oxotransferase model compounds: influence on the oxygen atom transfer.

Treatment of [MoO(N-t-Bu)Cl(2)(dme)] (dme = dimethoxyethane) with 2 equiv of the potassium salts of Schiff base ligands of the type KArNC(CH(3))CHC(CH(3))O afforded oxo imido molybdenum(VI) compounds [MoO(N-t-Bu)L(2)] {1, with Ar = phenyl (L(Ph)), 2 with Ar = 2-tolyl (L(MePh)), 3 with Ar = 2,6-dimethylphenyl (L(Me2Ph)) and 4 with Ar = 2,6-diisopropylphenyl (L(iPr2Ph))}. We have also prepared related bisimido complexes [Mo(N-t-Bu)(2)L(2) (5 with L = L(Ph), 6 with L = L(MePh), and 7 with L = L(Me2Ph)) by treatment of [Mo(N-t-Bu)(2)Cl(2)(dme)] with 2 equiv of the potassium salt of the respective ligand. 1, 3, 5, and 6 were characterized via single crystal X-ray diffraction.

Oxo-molybdenum and oxo-tungsten complexes of Schiff bases relevant to molybdoenzymes.

A series of octahedral dioxomolybdenum(VI) complexes of the type [MoO(2)L(2)] {L = 4-Ar-pent-2-en-ol; L(i-Pr2Ph) with Ar = 2,6-diisopropylphenyl (1); L(Me2Ph) with Ar = 2,6-dimethylphenyl (2), L(MePh) with Ar = 2-methylphenyl (3) and with Ar = phenyl (4)} and dioxotungsten(VI) compounds [WO(2)L(2)] {L(i-Pr2Ph) (5); L(Me2Ph) (6) and L(MePh) (7)} with Schiff bases have been synthesized as models for oxotransferases. Spectroscopic characterization in solution shows with the sterically encumbered ligands L(i-Pr2)Ph and L(Me2)Ph isomerically pure products whereas the ligand with only one substituent in ortho position at the aromatic ring L(MePh) revealed a dynamic mixture of three isomers as confirmed by variable temperature NMR spectroscopy. Single crystal X-ray diffraction analyses of compounds 1, 2, and 4 and showed them to be in the N,N-trans conformation consistent with the larger steric demand at nitrogen.

Binuclear cobalt complexes of Schiff-base calixpyrroles and their roles in the catalytic reduction of dioxygen.

The syntheses and characterization of a series of binuclear cobalt complexes of the octadentate Schiff-base calixpyrrole ligand L are described. The cobalt(II) complex [Co(2)(L)] was prepared by a transamination method and was found to adopt a wedged, Pac-man geometry in the solid state and in solution. Exposure of this compound to dioxygen resulted in the formation of a 90:10 mixture of the peroxo [Co(2)(O(2))(L)] and superoxo [Co(2)(O(2))(L)](+) complexes in which the peroxo ligand was found to bind in a Pauling mode in the binuclear cleft in pyridine and acetonitrile adducts in the solid state.

Design and synthesis of binucleating macrocyclic clefts derived from Schiff-base calixpyrroles.

The syntheses, characterisation and complexation reactions of a series of binucleating Schiff-base calixpyrrole macrocycles are described. The acid-templated [2+2] condensations between meso-disubstituted diformyldipyrromethanes and o-phenylenediamines generate the Schiff-base pyrrolic macrocycles H(4)L(1) to H(4)L(6) upon basic workup. The single-crystal X-ray structures of both H(4)L(3).

Synthesis of chromium(0) and molybdenum(0) bis (eta(6)-arene) derivatives and their monoelectronic oxidation to [M(eta(6)-arene)(2)](+) cations.

M(eta(6)-arene)(2) species (M = Cr, arene = 1,3,5-Me(3)C(6)H(3); M = Mo, arene = 1,3,5-Me(3)C(6)H(3), 1,3,5-(i)Pr(3)C(6)H(3)), have been prepared by a modified Fischer-Hafner synthesis or by metal vapour techniques. The reaction of Cr(eta(6)-1,3,5-Me(3)C(6)H(3))(2) with the fulvene derivatives pentacarbomethoxycyclopentadiene (pcmcpH), 1-benzoyl-6-hydroxy-6-phenylfulvene (dbcpH), or 1-benzoyl-3-nitro-6-hydroxy-6-phenylfulvene (dbncpH) proceeds with evolution of dihydrogen and formation of the ionic derivatives [Cr(eta(6)-1,3,5-Me(3)C(6)H(3))(2)][E], where E = pcmcp, dbcp, or dbncp. Mo(eta(6)-arene)(2) derivatives (arene = toluene, 1,3,5-Me(3)C(6)H(3), 1,3,5-(i)Pr(3)C(6)H(3)) are oxidized to [Mo(eta(6)-arene)(2)](+) by pcmcpH.