Performance of Biodegradable Active Packaging in the Preservation of Fresh-Cut Fruits: A Systematic Review.

Fresh-cutting fruits is a common practice in markets and households, but their short shelf life is a challenge. Active packaging is a prominent strategy for extending food shelf life. A systematic review was conducted following the PRISMA guidelines to explore the performance and materials used in biodegradable active packaging for fresh-cut fruits.

Physicochemical and Mechanical Properties of Non-Isocyanate Polyhydroxyurethanes (NIPHUs) from Epoxidized Soybean Oil: Candidates for Wound Dressing Applications.

Only 0.1% of polyurethanes available on the market are from renewable sources. With increasing concern about climate change, the substitution of monomers derived from petrochemical sources and the application of eco-friendly synthesis processes is crucial for the development of biomaterials.

Obtention and Study of Polyurethane-Based Active Packaging with Curcumin and/or Chitosan Additives for Fruits and Vegetables-Part I: Analysis of Morphological, Mechanical, Barrier, and Migration Properties.

Several polyurethane-formulated films with curcumin and/or chitosan additives for food packaging have been previously obtained. The study examines the effect of the additives on the film's morphological, mechanical, barrier, and migration properties. Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), water contact angle, thermogravimetric and differential thermal analysis (TGA and DTGA), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), oxygen transmission rate (OTR), water vapor transmission rate (WVTR), and the overall and specific migration tests were conducted.

Incorporation of Chitosan in Polyurethanes Based on Modified Castor Oil for Cardiovascular Applications.

The increased demand for vascular grafts for the treatment of cardiovascular diseases has led to the search for novel biomaterials that can achieve the properties of the tissue. According to this, the investigation of polyurethanes has been a promising approach to overcome the present limitations. However, some biological properties remain to be overcome, such as thrombogenicity and hemocompatibility, among others.

Freshwater-Derived : Prospective Polyvinyl Chloride (PVC) Biodegraders.

Polyvinyl chloride (PVC) is widely used in industrial applications, such as construction and clothing, owing to its chemical, physical, and environmental resistance. Owing to the previous characteristics, PVC is the third most consumed plastic worldwide and, consequently, an increasing waste accumulation-related problem. The current study evaluated an in-house collection of 61 Actinobacteria strains for PVC resin biodegradation.

Assessment of the Anti-Thrombogenic Activity of Polyurethane Starch Composites.

The increasing morbidity and mortality of patients due to post-surgery complications of coronary artery bypass grafts (CABPG) are related to blood-material interactions. Thus, the characterization of the thrombogenicity of the biomaterial for cardiovascular devices is of particular interest. This research evaluated the anti-thrombogenic activity of polyurethanes-starch composites.

Influence of Starch on the Structure-Properties Relationship in Polyethylene Glycol/Polycaprolactone Diol Polyurethanes.

Improvements in the antithrombogenicity activity of biomaterials for cardiovascular applications are necessary to meet the demand for vascular grafts in the world. Zwitterionic compounds tend to be used due to their anti-fouling properties, which reduce platelet adhesions and protein absorptions. Therefore, in this research, potato starch (AL-N) and zwitterionic starch (AL-Z) (obtained by Williamson etherification) were included as fillers in polyurethane (PU) matrices from polycaprolactone diol (PCL), polyethylene glycol (PEG), pentaerythritol (PE) and isophorone diisocyanate (IPDI) in order to study their effect in terms of their physicochemical, mechanical and thermal properties.

Insights into the Design of Polyurethane Dressings Suitable for the Stages of Skin Wound-Healing: A Systematic Review.

Dressings made with polyurethanes have been found to exhibit good and varied biological properties that make them good candidates for this application. However, as has been seen, the wound-healing process is complex, which includes four different stages. So far, the design and evaluation of polyurethane for wound dressing has focused on achieving good properties (mechanical, physicochemical, and biological), but each of them separates from the others or even directed at only one of the stages of skin wound-healing.

as Potential Synthetic Polymer Degraders: A Systematic Review.

The inherent resistance of synthetic plastics to degradation has led to an increasing challenge of waste accumulation problem and created a pollution issue that can only be addressed with novel complementary methods such as biodegradation. Since biocontrol is a promising eco-friendly option to address this challenge, the identification of suitable biological agents is a crucial requirement. Among the existing options, organisms of the genus have been reported to biodegrade several complex polymeric macromolecules such as chitin, lignin, and cellulose.

Mechanical Assessment and Hyperelastic Modeling of Polyurethanes for the Early Stages of Vascular Graft Design.

The material design of vascular grafts is required for their application in the health sector. The use of polyurethanes (PUs) in vascular grafts intended for application in the body appears to be adequate due to the fact that native tissues have similar properties as PUs. However, the influence of chemical structure on the biomechanics of PUs remains poorly described.

Why Polyurethanes Have Been Used in the Manufacture and Design of Cardiovascular Devices: A Systematic Review.

We conducted a systematic review in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement to ascertain why polyurethanes (PUs) have been used in the manufacture and design of cardiovascular devices. A complete database search was performed with PubMed, Scopus, and Web of Science as the information sources. The search period ranged from 1 January 2005 to 31 December 2019.

Influence of Polyol/Crosslinker Blend Composition on Phase Separation and Thermo-Mechanical Properties of Polyurethane Thin Films.

Polyurethanes (PUs) from Polyethylene glycol (PEG) and polycaprolactone diol (PCL) and a crosslinker, Pentaerythritol (PE), were synthetized with isophorone diisocyanate (IPDI). In this study, we investigated the effect of polyol and crosslinker composition on phase separation and thermo-mechanical properties. The properties were studied through dynamic mechanical analysis, X-ray scattering, atomic force microscopy (AFM), and thermogravimetric analysis (TGA).

Candidate Polyurethanes Based on Castor Oil (), with Polycaprolactone Diol and Chitosan Additions, for Use in Biomedical Applications.

Polyurethanes are widely used in the development of medical devices due to their biocompatibility, degradability, non-toxicity and chemical versatility. Polyurethanes were obtained from polyols derived from castor oil, and isophorone diisocyanate, with the incorporation of polycaprolactone-diol (15% /) and chitosan (3% /). The objective of this research was to evaluate the effect of the type of polyol and the incorporation of polycaprolactone-diol and chitosan on the mechanical and biological properties of the polyurethanes to identify the optimal ones for applications such as wound dressings or tissue engineering.

Surface Response Methodology-Based Mixture Design to Study the Influence of Polyol Blend Composition on Polyurethanes' Properties.

Polyurethanes are materials with a strong structure-property relationship. The goal of this research was to study the effect of a polyol blend composition of polyurethanes on its properties using a mixture design and setting mathematic models for each property. Water absorption, hydrolytic degradation, contact angle, tensile strength hardness and modulus were studied.

Effect of the incorporation of chitosan on the physico-chemical, mechanical properties and biological activity on a mixture of polycaprolactone and polyurethanes obtained from castor oil.

In the present study, polyurethane materials were obtained from castor oil, polycaprolactone and isophorone diisocyanate by incorporating different concentrations of chitosan (0.5, 1.0 and 2.

Microbial degradation, cytotoxicity and antibacterial activity of polyurethanes based on modified castor oil and polycaprolactone.

The objective of this study was to assess the effects of type of polyol and concentration of polycaprolactone (PCL) in polyurethanes (PUs) on microbial degradability, cytotoxicity, biological properties and antibacterial activity to establish whether these materials may have biomedical applications. Chemically modified and unmodified castor oil, PCL and isophorone diisocyanate in a 1:1 ratio of NCO/OH were used. PUs were characterized by stress/strain fracture tests and hardness (ASTM D 676-59).