Smart photopharmacological agents: LaVO:Eu@vinyl phosphonate combining luminescence imaging and photoswitchable butyrylcholinesterase inhibition.

The combination of photoswitchability and bioactivity in one compound provides interesting opportunities for photopharmacology. Here, we report a hybrid compound that in addition allows for its visual localization. It is the first demonstration of its kind and it even shows high photoswitchability.

Simultaneous Catechol and Hydroquinone Detection with Laser Fabricated MOF-Derived Cu-CuO@C Composite Electrochemical Sensor.

The conversion of metal-organic frameworks (MOFs) into advanced functional materials offers a promising route for producing unique nanomaterials. MOF-derived systems have the potential to overcome the drawbacks of MOFs, such as low electrical conductivity and poor structural stability, which have hindered their real-world applications in certain cases. In this study, laser scribing was used for pyrolysis of a Cu-based MOF ([Cu{1,4-CH(COO)}(4,4'-bipy)]) to synthesize a Cu-CuO@C composite on the surface of a screen-printed electrode (SPE).

All-in-One Photoactivated Inhibition of Butyrylcholinesterase Combined with Luminescence as an Activation and Localization Indicator: Carbon Quantum Dots@Phosphonate Hybrids.

Photopharmacology is a booming research area requiring a new generation of agents possessing simultaneous functions of photoswitching and pharmacophore. It is important that any practical implementation of photopharmacology ideally requires spatial control of the medicinal treatment zone. Thus, advances in the study of substances meeting all the listed requirements will lead to breakthrough research in the coming years.

Silver nanoparticle-based SERS sensors for sensitive detection of amyloid-β aggregates in biological fluids.

One of the hallmarks of Alzheimer's disease (AD) pathogenesis is the production, aggregation, and deposition of amyloid-β (Aβ) peptide. Surface-enhanced Raman spectroscopy (SERS) is a promising analytical technique capable of providing valuable information on chemical composition and molecule conformations in biological samples. However, one of the main challenges for introducing the SERS technique into the practice is preparation of scalable and at the same time stable nanostructured sensors with uniform spatial distribution of nanoparticles.

Special Issue "Laser Technologies in Metal-Based Materials".

The first publication, analyzing the prospects for the use of laser radiation, was published under the authorship of the American physicist Arthur Shawlow in November 1960 (Schawlow, A [...

3D Nanocomposite with High Aspect Ratio Based on Polyaniline Decorated with Silver NPs: Synthesis and Application as Electrochemical Glucose Sensor.

In this paper, we present a new methodology for creating 3D ordered porous nanocomposites based on anodic aluminum oxide template with polyaniline (PANI) and silver NPs. The approach includes in situ synthesis of polyaniline on templates of anodic aluminum oxide nanomembranes and laser-induced deposition (LID) of Ag NPs directly on the pore walls. The proposed method allows for the formation of structures with a high aspect ratio of the pores, topological ordering and uniformity of properties throughout the sample, and a high specific surface area.

Laser-Induced Synthesis of Electrocatalytically Active Ag, Pt, and AgPt/Polyaniline Nanocomposites for Hydrogen Evolution Reactions.

We present an efficient and easily implemented approach for creating stable electrocatalytically active nanocomposites based on polyaniline (PANI) with metal NPs. The approach combines in situ synthesis of polyaniline followed by laser-induced deposition (LID) of Ag, Pt, and AgPt NPs. The observed peculiarity of LID of PANI is the role of the substrate during the formation of multi-metallic nanoparticles (MNP).

Photoswitchable Phosphonate-Fullerene Hybrids with Cholinesterase Activity.

Modern progress in photopharmocology calls for new generation of compounds joining bioactivity, photoswitchable properties and high selectivity of response to light wavelength. Introduced here, phosphonate-fullerene hybrids are the first representatives of such compounds. Phosphonate-fullerene hybrids were synthesized on a base of fullerene C and organophosphates with the function of photoswitchable cholinesterase activity-phosphorylated thiazolotriazole and aminomalonate compounds and studied with FTIR, UV-VIS spectroscopy and IPC-micro neurotoxin amperometric analysis.

Extreme Concentration and Nanoscale Interaction of Light.

Concentrating light strongly calls for appropriate polarization patterns of the focused light beam and for up to a full 4π solid angle geometry. Focusing on the extreme requires efficient coupling to nanostructures of one kind or another via cylindrical vector beams having such patterns, the details of which depend on the geometry and property of the respective nanostructure. Cylindrical vector beams can not only be used to study a nanostructure, but also vice versa.

Laser-assisted surface activation for fabrication of flexible non-enzymatic Cu-based sensors.

A rapid and effective technique has been develped for the fabrication of sensor-active copper-based materials on the surface of such flexible polymers as terephthalate, polyethylene naphthalate, and polyimide using the method of laser surface modification. For this purpose, we optimized the polymer surface activation parameters using laser sources with a picosecond pulse duration for subsequent selective metallization within the activated region. Furthermore, the fabricated copper structures were modified with gold nanostructures and by electrochemical passivation to produce copper-gold and oxide-containing copper species, respectively.

Photoluminescence and Energy Transfer in Double- and Triple-Lanthanide-Doped YVO Nanoparticles.

Optical materials doped with several lanthanides are unique in their properties and are widely used in various fields of science and technology. The study of these systems provides solutions for noncontact thermometry, bioimaging, sensing technology, and others. In this paper, we report on the demonstration of YVO nanoparticles doped with one, two, and three different rare earth ions (Tm, Er, and Nd).

[On the issue of evaluation of quality and efficiency of intersectorial interaction under palliative medical care support].

The article presents the original system of indices for comprehensive assessment of level of intersectorial collaboration in palliative medical care support of population. The system was developed on the basis of and considering requirements of normative legal acts of the Russian Federation. The proposed indices can be applied in analysis of functioning and subsequent optimization of medical institutions network and social service institutions in the subjects of the Russian Federation, including involvement of non-profit organizations and public associations.

A Self-Ordered Nanostructured Transparent Electrode of High Structural Quality and Corresponding Functional Performance.

The preparation of a highly ordered nanostructured transparent electrode based on a combination of nanosphere lithography and anodization is presented. The size of perfectly ordered pore domains is improved by an order of magnitude with respect to the state of the art. The concomitantly reduced density of defect pores increases the fraction of pores that are in good electrical contact with the underlying transparent conductive substrate.

Laser-Induced Deposition of Plasmonic Ag and Pt Nanoparticles, and Periodic Arrays.

Surfaces functionalized with metal nanoparticles (NPs) are of great interest due to their wide potential applications in sensing, biomedicine, nanophotonics, etc. However, the precisely controllable decoration with plasmonic nanoparticles requires sophisticated techniques that are often multistep and complex. Here, we present a laser-induced deposition (LID) approach allowing for single-step surface decoration with NPs of controllable composition, morphology, and spatial distribution.

Laser-induced twisting of phosphorus functionalized thiazolotriazole as a way of cholinesterase activity change.

Herein, the synthesis, design, and the physicochemical characterization of phosphorus functionalized thiazolotriazole (PFT) compound are presented. The PFT tests on the biological activity revealed butyrylcholinesterase inhibition that was confirmed and explained with molecular docking studies. The pronounced reduction of optical density and biological activity was found as a result of irradiation of the PFT water solution with laser beam at wavelength 266 nm.

Spectral properties of triphenyltin chloride toxin and its detectivity by SERS: Theory and experiment.

The triphenyltin chloride (TPhTCl) molecular structure was investigated by Raman spectroscopy, surface-enhanced Raman spectroscopy (SERS) and the density functional theory (DFT) modeling. Several conformers with different ordering of the benzene rings were determined in the gas phase and in the dimethyl sulfoxide (DMSO) medium. It was shown that the dihedral angles describing such ordering can change under room conditions.

Hybrid Orthorhombic Carbon Flakes Intercalated with Bimetallic Au-Ag Nanoclusters: Influence of Synthesis Parameters on Optical Properties.

Until recently, planar carbonaceous structures such as graphene did not show any birefringence under normal incidence. In contrast, a recently reported novel orthorhombic carbonaceous structure with metal nanoparticle inclusions does show intrinsic birefringence, outperforming other natural orthorhombic crystalline materials. These flake-like structures self-assemble during a laser-induced growth process.

Construction of efficient dual activating ratiometric YVO:Nd/Eu nanothermometers using co-doped and mixed phosphors.

The development of new contactless thermal nanosensors based on a ratiometric approach is of significant interest. To overcome the intrinsic limitations of thermally coupled levels, a dual activation strategy was applied. Dual activation was performed using co-doped single nanoparticles and a binary mixture of single-doped nanoparticles.

Adjusting Interfacial Chemistry and Electronic Properties of Photovoltaics Based on a Highly Pure SbS Absorber by Atomic Layer Deposition.

The combination of oxide and heavier chalcogenide layers in thin film photovoltaics suffers limitations associated with oxygen incorporation and sulfur deficiency in the chalcogenide layer or with a chemical incompatibility which results in dewetting issues and defect states at the interface. Here, we establish atomic layer deposition (ALD) as a tool to overcome these limitations. ALD allows one to obtain highly pure SbS light absorber layers, and we exploit this technique to generate an additional interfacial layer consisting of 1.

Investigating the Optical Properties of a Laser Induced 3D Self-Assembled Carbon-Metal Hybrid Structure.

Carbon-based and carbon-metal hybrid materials hold great potential for applications in optics and electronics. Here, a novel material made of carbon and gold-silver nanoparticles is discussed, fabricated using a laser-induced self-assembly process. This self-assembled metamaterial manifests itself in the form of cuboids with lateral dimensions on the order of several micrometers and a height of tens to hundreds of nanometers.

Nanoporous water oxidation electrodes with a low loading of laser-deposited Ru/C exhibit enhanced corrosion stability.

For the oxidation of water to dioxygen, oxide-covered ruthenium metal is known as the most efficient catalyst, however, with limited stability. Herein, we present a strategy for incorporating a Ru/C composite onto a novel nanoporous electrode surface with low noble metal loading and improved stability. The Ru/C is coated on the pore walls of anodic alumina templates in a one-step laser-induced deposition method from Ru(CO) solutions.

Raman fingerprints for unambiguous identification of organotin compounds.

Raman spectra of the different ecotoxicants such as perfluorooctane sulfonate acid, organotin compounds of different families tributyl-, and triphenyl-, as well as chemically close compounds belonging to the same family - such as mono-, di-, and tributyl organotin compounds were analyzed. The comprehensive Raman spectra analysis allowed suggesting the identification scheme for clear recognition of the toxins family and the following intra-group specification. Possibility of unambiguous toxins detection and identification was demonstrated also for complex mixtures of various toxins on a base of control of characteristic peak groups, which can be considered as Raman fingerprints of the listed environmentally hazardous substances.