The formation and effect of mannitol hemihydrate on the stability of monoclonal antibody in the lyophilized state.

Crystalline bulking agent in lyophilized biopharmaceutical formulations provides an elegant lyophilized cake structure and allows aggressive primary drying conditions. The interplay between amorphous and crystalline state of excipients heavily influence the stability of lyophilized biological products and should be carefully evaluated in the formulation and process development phase. This study focuses on: (1) elucidating the influence of formulation and lyophilization process variables on the formation of different states of mannitol and (2) its impact on model monoclonal antibody stability when compared to sucrose.

Aggressive conditions during primary drying as a contemporary approach to optimise freeze-drying cycles of biopharmaceuticals.

Freeze-drying is the method of choice to dry formulations with biopharmaceutical drugs, to enhance protein stability. This is usually done below the glass transition temperature of maximally freeze-concentrated solutions (T'), to avoid protein aggregation, preserve protein activity, and obtain pharmaceutically 'elegant' cakes. Unfortunately, this is a lengthy and energy-consuming process.

In situ generation of 3D graphene-like networks from cellulose nanofibres in sintered ceramics.

Establishing a 3D electrically percolating network in an insulating matrix is key to numerous engineering and functional applications. To this end, using hydrophobic carbon nanofillers is tempting, but still results in suboptimal performance due to processing challenges. Here, we demonstrate how natural cellulose nanofibres can be in situ transformed into graphene-like sheets connected to a 3D network enhancing both the transport and the mechanical properties of sintered engineering ceramics.

The agglomeration, coalescence and sliding of nanoparticles, leading to the rapid sintering of zirconia nanoceramics.

Conventional sintering is a time- and energy-consuming process used for the densification of consolidated particles facilitated by atomic diffusion at high temperatures. Nanoparticles, with their increased surface free energy, can promote sintering; however, size reduction also promotes agglomeration, so hampering particle packing and complete densification. Here we show how the ordered agglomeration of zirconia primary crystallites into secondary particle assemblies ensures their homogeneous packing, while also preserving the high surface energy to higher temperatures, increasing the sintering activity.

Quantifying Geometric Strain at the PbS QD-TiO₂ Anode Interface and Its Effect on Electronic Structures.

Quantum dots (QDs) show promise as the absorber in nanostructured thin film solar cells, but achieving high device efficiencies requires surface treatments to minimize interfacial recombination. In this work, lead sulfide (PbS) QDs are grown on a mesoporous TiO2 film with a crystalline TiO2 surface, versus one coated with an amorphous TiO2 layer by atomic layer deposition (ALD). These mesoporous TiO2 films sensitized with PbS QDs are characterized by X-ray and electron diffraction, as well as X-ray absorption spectroscopy (XAS) in order to link XAS features with structural distortions in the PbS QDs.

Enhanced Step Coverage of TiO₂ Deposited on High Aspect Ratio Surfaces by Plasma-Enhanced Atomic Layer Deposition.

Plasma-enhanced atomic layer deposition (PEALD) provides multiple benefits compared to thermal ALD including lower possible process temperature and a wider palette of possible materials. However, coverage of high aspect ratio (AR) structures is limited due to the recombination rates of the radical plasma species. We study the limits of conformality in 1:30 AR structures for TiO2 based on tetrakis(dimethylamido)titanium (TDMA-Ti) and O2 plasma through variation in plasma exposure and substrate temperature.

Variation of energy density of states in quantum dot arrays due to interparticle electronic coupling.

Subnanometer-resolved local electron energy structure was measured in PbS quantum dot superlattice arrays using valence electron energy loss spectroscopy with scanning transmission electron microscopy. We found smaller values of the lowest available transition energies and an increased density of electronic states in the space between quantum dots with shorter interparticle spacing, indicating extension of carrier wave functions as a result of interparticle electronic coupling. A quantum simulation verified both trends and illustrated the wave function extension effect.

Atomic layer deposition of undoped TiO2 exhibiting p-type conductivity.

With prominent photocatalytic applications and widespread use in semiconductor devices, TiO2 is one of the most popular metal oxides. However, despite its popularity, it has yet to achieve its full potential due to a lack of effective methods for achieving p-type conductivity. Here, we show that undoped p-type TiO2 films can be fabricated by atomic layer deposition (ALD) and that their electrical properties can be controlled across a wide range using proper postprocessing anneals in various ambient environments.

Plasma processing for crystallization and densification of atomic layer deposition BaTiO3 thin films.

High-k, low leakage thin films are crucial components for dynamic random access memory (DRAM) capacitors with high storage density and a long storage lifetime. In this work, we demonstrate a method to increase the dielectric constant and decrease the leakage current density of atomic layer deposited BaTiO3 thin films at low process temperature (250 °C) using postdeposition remote oxygen plasma treatment. The dielectric constant increased from 51 (as-deposited) to 122 (plasma-treated), and the leakage current density decreased by 1 order of magnitude.

Sol-flame synthesis of cobalt-doped TiO2 nanowires with enhanced electrocatalytic activity for oxygen evolution reaction.

Doping nanowires (NWs) is of crucial importance for a range of applications due to the unique properties arising from both impurities' incorporation and nanoscale dimensions. However, existing doping methods face the challenge of simultaneous control over the morphology, crystallinity, dopant distribution and concentration at the nanometer scale. Here, we present a controllable and reliable method, which combines versatile solution phase chemistry and rapid flame annealing process (sol-flame), to dope TiO2 NWs with cobalt (Co).

Cu and CuO/titanate nanobelt based network assemblies for enhanced visible light photocatalysis.

3D network configurations of copper(II) oxide/titanate nanobelt (CuO/TiNBs) and copper/titanate nanobelt (Cu/TiNBs) were formed using a two-step polyelectrolyte-assisted synthesis and assembly approach. The photoactivity of the TiNB/CuO and Cu/TiNB composite networks is significantly enhanced as compared to the activity of 3D structures formed of pristine TiNB. An efficient, UV-vis-light-induced electron transfer at the two-component interface achieved by the intimate coupling of TiNB with p-type semiconducting CuO and plasmonic Cu nanoparticles in composite heterostructures facilitates control over the system's exciton dynamics, which results in highly efficient UV-vis photocatalytic performance of heterostructures.

Rapid and controllable flame reduction of TiO2 nanowires for enhanced solar water-splitting.

We report a new flame reduction method to generate controllable amount of oxygen vacancies in TiO2 nanowires that leads to nearly three times improvement in the photoelectrochemical (PEC) water-splitting performance. The flame reduction method has unique advantages of a high temperature (>1000 °C), ultrafast heating rate, tunable reduction environment, and open-atmosphere operation, so it enables rapid formation of oxygen vacancies (less than one minute) without damaging the nanowire morphology and crystallinity and is even applicable to various metal oxides. Significantly, we show that flame reduction greatly improves the saturation photocurrent densities of TiO2 nanowires (2.

Codoping titanium dioxide nanowires with tungsten and carbon for enhanced photoelectrochemical performance.

Recent density-functional theory calculations suggest that codoping TiO2 with donor-acceptor pairs is more effective than monodoping for improving photoelectrochemical water-splitting performance because codoping can reduce charge recombination, improve material quality, enhance light absorption and increase solubility limits of dopants. Here we report a novel ex-situ method to codope TiO2 with tungsten and carbon (W, C) by sequentially annealing W-precursor-coated TiO2 nanowires in flame and carbon monoxide gas. The unique advantages of flame annealing are that the high temperature (>1,000 °C) and fast heating rate of flame enable rapid diffusion of W into TiO2 without damaging the nanowire morphology and crystallinity.

Silver nanoparticles on titanate nanobelts via the self-assembly of weak polyelectrolytes: synthesis and photocatalytic properties.

A weak-polyelectrolyte multilayer on a surface of titanate nanobelts (Ti-NBs) was utilized as a template for in situ Ag nanoparticle formation in the fabrication of Ag-loaded Ti-NBs nanocomposites. The polyelectrolyte multilayer (PEM) was fabricated using layer-by-layer self-assembly of poly(acrylic acid) (PAA) and poly(allylamine hydrochloride) (PAH) on the surface of high-surface-area titanate nanobelts (Ti-NBs) synthesized using a hydrothermal procedure. The concentration of Ag nanoparticles in the PEM was controlled by repeating the ion-loading/reduction cycle.

Weak polyion multilayer-assisted in situ synthesis as a route toward a plasmonic Ag/TiO2 photocatalyst.

Nanocrystalline Ag/TiO(2) composite thin films were synthesized using a two-step synthesis methodology: the in situ precipitation of Ag nanoparticles followed by an in situ sol-gel reaction of titanium iso-propoxide in a weak polyion multilayer (PEM) template formed by the layer-by-layer (LbL) self-assembly of poly(acrylic acid) (PAA) and polyallylamine (PAH). Because the PEM template is assembled from weak polyions, it contains nonionized carboxylic groups that are able to react with the inorganics, resulting in the formation of a homogeneous Ag(x)/TiO(2)-PEM precursor film, where the content of Ag is controlled by repeating the Ag loading cycle. The subsequent annealing of the precursor yields nanostructured Ag(x)/TiO(2) films with thicknesses controlled by the PEM template on the nanometer scale.

Controlled synthesis of pure and doped ZnS nanoparticles in weak polyion assemblies: growth characteristics and fluorescence properties.

A polyelectrolyte multilayer (PEM) fabricated by the layer-by-layer (LbL) self-assembly of weak polyions of polyacrylic acid (PAA) and polyallylamine (PAH) was applied as a matrix for the in situ nucleation and growth of pure and Mn-doped ZnS nanocrystallites. The nucleation and growth is initiated by the adsorption and binding of the metal ions to the ionized carboxylic groups of the weak polyions within the matrix, followed by the subsequent precipitation of semiconductor nanocrystallites with Na(2)S. Transmission electron microscopy (TEM), atomic force microscopy (AFM) and UV-vis spectroscopy were employed to establish the growth characteristics of the spherical ZnS nanocrystallites in the polyion matrix.