Structural Asymmetry of Metallic Single-Atom Contacts Detected by Current-Voltage Characteristics.

The complex behavior of the simplest atomic-scale conductors indicates that the electrode structure itself is significant in the design of future nanoscale devices. In this study, the structural asymmetry of metallic atomic contacts formed between two macroscopic Au electrodes at room temperature was investigated. Characteristic signatures of the structural asymmetries were detected by fast current-voltage (-) measurements with a time resolution of approximately 100 μs.

Principal Component Analysis of Surface-Enhanced Raman Scattering Spectra Revealing Isomer-Dependent Electron Transport in Spiropyran Molecular Junctions: Implications for Nanoscale Molecular Electronics.

The characterization of single-molecule structures could provide significant insights into the operation mechanisms of functional devices. Structural transformation via isomerization has been extensively employed to implement device functionalities. Although single-molecule identification has recently been achieved using near-field spectroscopy, discrimination between isomeric forms remains challenging.

Single-molecule junction spontaneously restored by DNA zipper.

The electrical properties of DNA have been extensively investigated within the field of molecular electronics. Previous studies on this topic primarily focused on the transport phenomena in the static structure at thermodynamic equilibria. Consequently, the properties of higher-order structures of DNA and their structural changes associated with the design of single-molecule electronic devices have not been fully studied so far.

Anomalous spin relaxation in graphene nanostructures on the high temperature annealed surface of hydrogenated diamond nanoparticles.

The electronic and magnetic structures of diamond nanoparticles with a hydrogenated surface are investigated as a function of annealing temperature under vacuum annealing up to 800-1000 °C. Near edge X-ray absorption fine structure (NEXAFS) spectra together with elemental analysis show successive creation of defect-induced nonbonding surface states at the expense of surface-hydrogen atoms as the annealing temperature is increased above 800 °C. Magnetization and ESR spectra confirm the increase in the concentration of localized spins assigned to the nonbonding surface states upon the increase of the annealing temperature.

Elementary processes of DNA surface hybridization resolved by single-molecule kinetics: implication for macroscopic device performance.

Direct monitoring of single-molecule reactions has recently become a promising means of mechanistic investigation. However, the resolution of reaction pathways from single-molecule experiments remains elusive, primarily because of interference from extraneous processes such as bulk diffusion. Herein, we report a single-molecule kinetic investigation of DNA hybridization on a metal surface, as an example of a bimolecular association reaction.

Single-molecule junctions of multinuclear organometallic wires: long-range carrier transport brought about by metal-metal interaction.

Here, we report multinuclear organometallic molecular wires having (2,5-diethynylthiophene)diyl-Ru(dppe) repeating units. Despite the molecular dimensions of 2-4 nm the multinuclear wires show high conductance (up to 10 to 10 ) at the single-molecule level with small attenuation factors () as revealed by STM-break junction measurements. The high performance can be attributed to the efficient energy alignment between the Fermi level of the metal electrodes and the HOMO levels of the multinuclear molecular wires as revealed by DFT-NEGF calculations.

Water Splitting Induced by Visible Light at a Copper-Based Single-Molecule Junction.

Water splitting is an essential process for converting light energy into easily storable energy in the form of hydrogen. As environmentally preferable catalysts, Cu-based materials have attracted attention as water-splitting catalysts. To enhance the efficiency of water splitting, a reaction process should be developed.

Single-molecule determination of chemical equilibrium of DNA intercalation by electrical conductance.

We investigated a single-molecule reaction of DNA intercalation as an example of a bimolecular association reaction. Single-molecule conductance values of the product and reactant molecules adsorbed on an Au surface were measured to identify and quantify these molecules. The binding isotherm was constructed, and the association constant of the reaction was determined on a single-molecule basis.

Single-Molecule Junction of a Cationic Rh(III) Polyyne Molecular Wire.

Single-molecule conductance studies on metal-containing inorganic and organometallic molecular wires are relatively less explored compared to those on organic molecular wires. Furthermore, conductance and transmission profiles of the metal-containing wires insensitive to the metal centers often hinder rational design for high performance wires. Here, synthesis and single-molecule conductance measurements of the bis(butadiynyl)rhodium wires with tetracarbene ligands and are reported as rare examples for Rh(III) diacetylide molecular wires.

Structure and Electron Transport at Metal Atomic Junctions Doped with Dichloroethylene.

The front cover artwork was provided by the group of Prof. Nishino, Tokyo Institute of Technology. The image depicts the investigation of the structure and electron transport of the Au, Ag, Cu, Ni, Fe, and Pd atomic junctions doped with dichloroethylene.

Selective formation of molecular junctions with high and low conductance states by tuning the velocity of electrode displacement.

A single-molecule junction of 1,4-di(4-pyridyl)benzene (DPB) was prepared in a nano-gap between two Au electrodes using the scanning tunnelling microscopy-based break junction method (STM-BJ). Electric conductance and current versus bias voltage (I-V) measurements during the pulling and pushing processes of DPB single-molecule junctions revealed that high (H) and low (L) conductance states formed in both the pulling and pushing processes. Analysis of the I-V curves based on a single-level model indicated that the difference in conductivity of the H and L states mainly arises from high and low metal-molecule electric coupling in the junction.

Kinetic investigation of a chemical process in single-molecule junction.

Herein, we report on the kinetic investigation for the breakdown of single-molecule junctions. Current through the junctions was measured as a function of time to elucidate their lifetimes. The analysis of the lifetimes revealed that the breakdown reaction obeys first-order reaction kinetics, and the rate constants determined from the analysis were found to reflect the stability of the junctions.

Structure and Electron Transport at Metal Atomic Junctions Doped with Dichloroethylene.

We have investigated the structure and electron transport at dichloroethylene-doped metal atomic junctions at low temperatures (20 K) in ultra-high vacuum, using Fe, Ni, Pd, Cu, Ag, and Au. The metal atomic junctions were fabricated using the mechanically controllable break junction technique. After introducing the dichloroethylene (DCE), the conductance behavior of Fe, Ni, and Pd junctions was considerably changed, whereas little change was observed for Cu, Ag, and Au.

Electric-Field-Controllable Conductance Switching of an Overcrowded Ethylene Self-Assembled Monolayer.

Molecular isomerism has been discussed from the viewpoint of the tiniest switch and memory elements in electronics. Here, we report an overcrowded ethylene-based molecular conductance switch, which fulfills all the essential requirements for implementation into electronic devices, namely, electric-field-controllable reversible conductance change with a molecular-level spatial resolution, robust conformational bistability under ambient conditions, and ordered monolayer formation on electrode surfaces. The conformational state of this overcrowded ethylene, represented by a folded or twisted conformer, is susceptible to external environments.

Identifying the molecular adsorption site of a single molecule junction through combined Raman and conductance studies.

Single-molecule junctions are ideal test beds for investigating the fundamentals of charge transport at the nanoscale. Conducting properties are strongly dependent on the metal-molecule interface geometry, which, however, is very poorly characterized due to numerous experimental challenges. We report on a new methodology for characterizing the adsorption site of single-molecule junctions through the combination of surface enhanced Raman scattering (SERS), current-voltage (-) curve measurements, and density functional theory simulations.

Tuneable single-molecule electronic conductance of C by encapsulation.

It has been demonstrated that the single-molecule transport properties of fullerene C can be modulated by encapsulating endohedral species, i.e. Li and HO, which exhibit different degrees of van der Waals interactions with the C cage.

Highly Reproducible Formation of a Polymer Single-Molecule Junction for a Well-Defined Current Signal.

Single-molecule devices attract much interest in the development of nanoscale electronics. Although a variety of functional single molecules for single-molecule electronics have been developed, there still remains the need to implement sophisticated functionalization toward practical applications. Given its superior functionality encountered in macroscopic materials, a polymer could be a useful building block in the single-molecule devices.

Triptycene Tripods for the Formation of Highly Uniform and Densely Packed Self-Assembled Monolayers with Controlled Molecular Orientation.

When employing self-assembled monolayers (SAMs) for tuning surface and interface properties, organic molecules that enable strong binding to the substrate, large-area structural uniformity, precise alignment of functional groups, and control of their density are highly desirable. To achieve these goals, tripod systems bearing multiple bonding sites have been developed as an alternative to conventional monodentate systems. Bonding of all three sites has, however, hardly been achieved, with the consequence that structural uniformity and orientational order in tripodal SAMs are usually quite poor.

Studies on single-molecule bridging metal electrodes: development of new characterization technique and functionalities.

A single molecular junction is a nanoscale structure prepared by bridging a single molecule between macroscopic metal electrodes. It has attracted significant attention due to its unique structure and potential applications in ultra-small single molecular electronic devices. It has two metal-molecule interfaces, and thus the electronic structure of the molecule can be significantly modulated from its original one.

Investigation on Single-Molecule Junctions Based on Current⁻Voltage Characteristics.

The relationship between the current through an electronic device and the voltage across its terminals is a current⁻voltage characteristic (⁻) that determine basic device performance. Currently, ⁻ measurement on a single-molecule scale can be performed using break junction technique, where a single molecule junction can be prepared by trapping a single molecule into a nanogap between metal electrodes. The single-molecule ⁻s provide not only the device performance, but also reflect information on energy dispersion of the electronic state and the electron-molecular vibration coupling in the junction.

Controlling stacking order and charge transport in π-stacks of aromatic molecules based on surface assembly.

Here, we report a facile procedure based on surface self-assembly for controlling the π-π stacking order and relevant rectified charge transport properties in stacks of aromatic molecules on a single-molecule scale. A high rectification ratio of 10 was achieved and the rectification direction was uniquely determined by the controlled stacking order of the aromatic molecules on the graphene layers of HOPG.

"Doping" of Polyyne with an Organometallic Fragment Leads to Highly Conductive Metallapolyyne Molecular Wire.

Exploration of highly conductive molecules is essential to achieve single-molecule electronic devices. The present paper describes the results on single-molecule conductance study of polyyne wires doped with the organometallic Ru(dppe) fragment, X-(C≡C) -Ru(dppe)-(C≡C) -X. The metallapolyyne wires end-capped with the gold fragments (X = AuL) are subjected to single-molecule conductance measurements with the STM break junction technique, which reveal the high conductance (10-10 G; n = 2-4) with the low attenuation factor (0.

Evaluation of the Kinetic Property of Single-Molecule Junctions by Tunneling Current Measurements.

We investigated the formation and breaking of single-molecule junctions of two kinds of dithiol molecules by time-resolved tunneling current measurements in a metal nanogap. The resulting current trajectory was statistically analyzed to determine the single-molecule conductance and, more importantly, to reveal the kinetic property of the single-molecular junction. These results suggested that combining a measurement of the single-molecule conductance and statistical analysis is a promising method to uncover the kinetic properties of the single-molecule junction.

Measurement of Electron Transfer within a Single Supramolecular Assembly Containing a Biological Molecule.

We report on a method to measure the electron transport of a single molecular assembly by scanning tunneling microscopy (STM). The STM molecular tip together with a chemically modified substrate was utilized to form an assembly with a single target molecule. This method was successfully applied to a heme peptide to reveal the transport property of a single peptide-containing assembly.

Ruthenium Tris-bipyridine Single-Molecule Junctions with Multiple Joint Configurations.

Single-molecule junctions are of particular interest in molecular electronics. To realize molecular electronic devices, it is crucial that functional single-molecule junctions are connected to each other by using joint units on the atomic scale. However, good joint units have not been reported because controlling the charge transport directions through the junctions is not trivial.