Quantitative noninvasive measurement of cerebrospinal fluid flow in shunted hydrocephalus.

Objective: Standard MRI protocols lack a quantitative sequence that can be used to evaluate shunt-treated patients with a history of hydrocephalus. The objective of this study was to investigate the use of phase-contrast MRI (PC-MRI), a quantitative MR sequence, to measure CSF flow through the shunt and demonstrate PC-MRI as a useful adjunct in the clinical monitoring of shunt-treated patients.

Methods: The rapid (96 seconds) PC-MRI sequence was calibrated using a flow phantom with known flow rates ranging from 0 to 24 mL/hr.

Ex Vivo Drug Screening Assay with Artificial Membranes: Characterizing Cholesterol Desorbing Competencies of Beta-Cyclodextrins.

Despite advancements in contemporary therapies, cardiovascular disease from atherosclerosis remains a leading cause of mortality worldwide. Supported lipid bilayers (SLBs) are membrane interfaces that can be constructed with varying lipid compositions. Herein, we use a solvent-assisted lipid bilayer (SALB) construction method to build SLB membranes with varying cholesterol compositions to create a lipid-sterol interface atop a piezoelectric sensor.

LRP-1 Binds Fibrinogen in a Sialylation-Dependent Manner: A Quartz Crystal Microbalance Study.

Cardiovascular disease (CVD) is the leading cause of mortality in the United States. Atherosclerosis, the dominant condition leading to CVD, is characterized by fibrofatty plaque formation. Fibrinogen, an important clotting factor, has been known to promote atherogenesis as it retains the ability to trigger smooth muscle cell proliferation, localize in areas crucial to plaque progression, and bind both platelets and leukocytes.

The Binding of Drug Molecules to Serum Albumin: The Effect of Drug Hydrophobicity on Binding Strength and Protein Desolvation.

In this work, dual polarization interferometry (DPI) and quartz crystal microgravimetry with dissipation monitoring (QCM-D) were used to examine the binding characteristics and structure-activity relationships of 12 common drugs on a model bovine serum albumin (BSA) film. By taking advantage of the different hydration sensitivities of DPI and QCM-D, we were able to quantify changes in the solvent state upon drug binding to BSA. Quantifying the changes in water mass within binding pockets and upon drug-protein binding allows for a more complete understanding of binding phenomena between drug molecules and serum proteins.

Optimizing the Formation of Supported Lipid Bilayers from Bicellar Mixtures.

Supported lipid bilayers (SLBs) are widely studied model membrane platforms that are compatible with various surface-sensitive measurement techniques. SLBs are typically formed on silica-based materials, and there are numerous possible fabrication routes involving either bottom-up molecular self-assembly or vesicle adsorption and rupture. In between these two classes of fabrication strategies lies an emerging approach based on depositing quasi-two-dimensional lamellar, bicellar disks composed of a mixture of long-chain and short-chain phospholipids to promote the formation of SLBs.

Effects of Al(3+) on Phosphocholine and Phosphoglycerol Containing Solid Supported Lipid Bilayers.

Aluminum has attracted great attention recently as it has been suggested by several studies to be associated with increased risks for Alzheimer's and Parkinson's disease. The toxicity of the trivalent ion is assumed to derive from structural changes induced in lipid bilayers upon binding, though the mechanism of this process is still not well understood. In the present study we elucidate the effect of Al(3+) on supported lipid bilayers (SLBs) using fluorescence microscopy, the quartz crystal microbalance with dissipation (QCM-D) technique, dual-polarization interferometry (DPI), and molecular dynamics (MD) simulations.

Quartz microbalance technology for probing biomolecular interactions.

Quartz crystal microbalance with dissipation monitoring (QCM-D) is a useful technique for observing the adsorption of molecules onto a protein-functionalized surface in real time. This technique is based on relating changes in the frequency of a piezoelectric sensor chip, onto which molecules are adsorbing, to changes in mass using the Sauerbrey equation. Here, we outline the cleaning, preparation, and analysis involved in a typical QCM-D experiment, from which one can obtain mass adsorption and kinetic binding information.

Monitoring N3 dye adsorption and desorption on TiO2 surfaces: a combined QCM-D and XPS study.

Understanding the kinetics of dye adsorption and desorption on semiconductors is crucial for optimizing the performance of dye-sensitized solar cells (DSSCs). Quartz crystal microbalance with dissipation monitoring (QCM-D) measures adsorbed mass in real time, allowing determination of binding kinetics. In this work, we characterize adsorption of the common RuBipy dye N3 to the native oxide layer of a planar, sputter-coated titanium surface, simulating the TiO2 substrate of a DSSC.

Accounting for unintended binding events in the analysis of quartz crystal microbalance kinetic data.

Previous methods for analyzing protein-ligand binding events using the quartz crystal microbalance with dissipation monitoring (QCM-D) fail to account for unintended binding that inevitably occurs during surface measurements and obscure kinetic information. In this article, we present a system of differential equations that accounts for both reversible and irreversible unintended interactions. This model is tested on three protein-ligand systems, each of which has different features, to establish the feasibility of using the QCM-D for protein binding analysis.

DNA adsorption to and elution from silica surfaces: influence of amino acid buffers.

Solid phase extraction and purification of DNA from complex samples typically requires chaotropic salts that can inhibit downstream polymerase amplification if carried into the elution buffer. Amino acid buffers may serve as a more compatible alternative for modulating the interaction between DNA and silica surfaces. We characterized DNA binding to silica surfaces, facilitated by representative amino acid buffers, and the subsequent elution of DNA from the silica surfaces.

Elucidation of the molecular interaction between cisplatin and flavonol(s) and their effect on DNA binding.

Combination therapy of cisplatin with flavonols is a promising treatment for increasing the efficacy of cisplatin when combating cancer. However, little is known about the molecular interactions between cisplatin and flavonols. The data herein helps to elucidate this interaction.

Desolvation of BSA-ligand complexes measured using the quartz crystal microbalance and dual polarization interferometer.

By taking advantage of their unique difference in hydration sensitivity, we have shown that dual polarization interferometer (DPI) and quartz-crystal microbalance with dissipation monitoring (QCM-D) measurements can be used together to explore the degree of desolvation involved in the binding of small drug molecules to an immobilized bovine serum albumin film in real time. Results with DPI and QCM-D show significantly different mass values for three ligands of varying hydrophobicities that may be attributed to changes in the degree of hydration of the ligand-protein complexes in accordance with the physicochemical properties of the ligands. Furthermore, our data suggest that masses measured by QCM-D can be overwhelmed by changes in water content of ligand-protein, binary complexes, which has important consequences for future studies using mechanical resonators to study protein-binding events.

Multiphasic DNA adsorption to silica surfaces under varying buffer, pH, and ionic strength conditions.

Reversible interactions between DNA and silica are utilized in the solid phase extraction and purification of DNA from complex samples. Chaotropic salts commonly drive DNA binding to silica but inhibit DNA polymerase amplification. We studied DNA adsorption to silica using conditions with or without chaotropic salts through bulk depletion and quartz crystal microbalance (QCM) experiments.

Human chorionic gonadotropin interactions with immobilized anti-hCG studied by quartz-crystal microbalance with dissipation monitoring.

Previous studies have found that commercial human pregnancy tests are often too insensitive to function to their advertised >99% accuracy. Improper orientation of proteins used for recognition of ligands in sensors can often prevent the binding site from being available to the ligand, thereby decreasing sensor sensitivity. We have developed a simple method for the immobilization of anti-human chorionic gonadotropin on a sensor surface that maximizes its sensitivity by ensuring ligand binding sites are exposed and densely packed.

Enhanced iron availability by protein glycation may explain higher infection rates in diabetics.

Serum proteins exist in a state of higher glycation among individuals with poor glycemic control, notably diabetics. These non-enzymatic modifications via the Maillard reaction have far reaching effects on metabolism and regulation, and may be responsible for increased infection rates within this population. Here we explore the effects of glycation on iron metabolism and innate immunity by investigating the interaction between siderophores and bovine serum albumin (BSA).

Quantification of the layer of hydration of a supported lipid bilayer.

Dual polarization interferometry (DPI) and quartz-crystal microgravimetry (QCM-D) were used to investigate the adsorption of DOPC vesicles to a solid hydrophilic surface. The layer of hydration formed between a self-assembled DOPC bilayer and a silica solid support was probed in assemblies constructed using H(2)O and D(2)O buffers. We used QCM-D to measure the mass of the bilayer, including the mass contribution of the coupled solvent that resides between the membrane-solid interface.

Controlling tyrosinase activity on charged polyelectrolyte surfaces: a QCM-D analysis.

The quartz crystal microbalance (QCM) was used to monitor the immobilization of tyrosinase on polycationic and polyanionic precursor assemblies in situ and in real-time. The resulting enzymatic surfaces were then exposed to various flavonoids, and the degree of binding was measured using QCM. We show that enzyme activity is retained when immobilized on polycationic films (flavonoid binding observed), while the active site is blocked when assembled on a polyanionic film (no flavonoid binding to the enzyme).

Structural changes in a polyelectrolyte multilayer assembly investigated by reflection absorption infrared spectroscopy and sum frequency generation spectroscopy.

The structure of polyelectrolyte multilayer films adsorbed onto either a per-protonated or per-deuterated 11-mercaptoundecanoic acid (h-MUA/d-MUA) self assembled monolayer (SAM) on gold was investigated in air using two surface vibrational spectroscopy techniques, namely, reflection absorption infrared spectroscopy (RAIRS) and sum frequency generation (SFG) spectroscopy. Determination of film masses and dissipation values were made using a quartz crystal microbalance with dissipation monitoring (QCM-D). The films, containing alternating layers of the polyanion poly[1-[4-(3-carboxy-4-hydroxyphenylazo) benzenesulfonamido]-1,2-ethanediyl, sodium salt] (PAZO) and the polycation poly(ethylenimine) (PEI) built on the MUA SAM, were formed using the layer-by-layer electrostatic self-assembly method.

A quartz crystal microbalance study of polycation-supported single and double stranded DNA surfaces.

A quartz crystal microbalance with dissipation monitoring (QCM-D) was used to investigate the properties and formation of a genomic mammalian DNA surface on a polycationic poly(ethylenimine) (PEI) film. We show that both single- and double-stranded DNA films can be deposited on the PEI surface by modulating the DNA adsorption time. The two distinct DNA surfaces can be confirmed by their interactions with urea, a common DNA denaturant, and ethidium bromide, a common DNA intercalator, both of which lead to characteristic changes in the QCM-D frequency and dissipation.

Controlling layer thickness and photostability of water-soluble cationic poly(p-phenylenevinylene) in multilayer thin films by surfactant complexation.

In this work we build on prior studies of the novel water-soluble cationic conjugated polymer known as "P2" (poly{2,5-bis[3-( N, N, N-triethylammonium bromide)-1-oxapropyl]-1,4-phenylenevinylene}) with a focus on its incorporation into thin films for such applications as photovoltaics or electroluminescent devices. Multilayer assemblies were constructed using P2, the anionic surfactant sodium dodecyl sulfate (SDS), and the polyanion poly(sodium 4-styrene-sulfonate) (PSS) using the technique of layer-by-layer electrostatic self-assembly (LBL-ESA). SDS was observed to affect the layer thicknesses and absorbance characteristics of the films.

Quartz resonator-based approach to ultrasonic rheology of a mixed-phase micellar system.

We report the application of a quartz crystal microbalance with dissipation monitoring (QCM-D) to rheology of mixed-phase micellar systems. This novel application of QCM-D allows for the facile monitoring of complex systems under a variety of conditions. Viscosity measurements were obtained for sodium dodecyl sulfate (SDS) solutions, ranging from 1.

Dual-beam polarization interferometry resolves mechanistic aspects of polyelectrolyte adsorption.

The electrostatically driven binding dynamics of a polyelectrolyte multilayer (PEMU) film was investigated in real-time using dual-beam polarization interferometry (DPI) and independently supported by quartz crystal microbalance with dissipation monitoring (QCM-D) studies. Multilayer assemblies of the polyanions poly[1-[4[(3-carboxy-4-hydroxyphenylazo)benzenesulfonamido]-1,2-ethanediyl sodium salt] (PAZO) and poly(styrene sulfonate) (PSS) were respectively constructed with the polycation poly(ethylenimine) (PEI) on anionic functionalized substrates using the layer-by-layer electrostatic self-assembly method. DPI measurements indicate that polyelectrolyte adsorption occurs in three distinct stages.

Tuning the optical properties of a water-soluble cationic poly(p-phenylenevinylene): surfactant complexation with a conjugated polyelectrolyte.

In this work, we investigate the emission and absorbance properties of the novel water-soluble cationic conjugated polymer poly{2,5-bis[3-(N,N,N-triethylammonium bromide)-1-oxapropyl]-1,4-phenylenevinylene}, denoted here as P2, in the presence of varying amounts of the anionic surfactant sodium dodecylsulfate (SDS). We show that the absolute photoluminescence quantum efficiency (PLQE), the absorption wavelength, and the emission wavelength of an aqueous solution of P2 can be adjusted according to the surfactant/polymer ratio in aqueous solution. In particular, we show that the addition of SDS to P2 increases the polyelectrolyte's PLQE to approximately 40%.

A real-time QCM-D approach to monitoring mammalian DNA damage using DNA adsorbed to a polyelectrolyte surface.

We have successfully demonstrated that the quartz crystal microbalance with dissipation monitoring (QCM-D) can be used to monitor real-time damage to genomic mammalian DNA adsorbed to a polyelectrolyte surface. To reveal the capabilities of this technique, we exposed DNA surfaces to quercetin, an agent that has been implicated in causing DNA strand breaks in a Cu(II)-dependent fashion in vitro. We show that the QCM-D frequency and dissipation patterns that result from exposure of the DNA surfaces to quercetin-Cu(II) are consistent with the induction of DNA strand scission.

Creation of mammalian single- and double-stranded DNA surfaces: a real-time QCM-D study.

The quartz crystal microbalance with dissipation monitoring (QCM-D) is an excellent method for studying the creation of DNA-based surfaces and films. Previous studies have used QCM-D to focus on the construction of DNA surfaces composed of short synthetic DNA oligomers or plasmid DNA. Here, we have used QCM-D to monitor the creation of genomic single- and double-stranded calf thymus DNA surfaces on a polycation adsorbed to a SiO2 support.