A 3D-printed microdevice encapsulates vascularized islets composed of iPSC-derived β-like cells and microvascular fragments for type 1 diabetes treatment.

Transplantation of insulin-secreting cells provides a promising method for re-establishing the autonomous blood glucose control ability of type 1 diabetes (T1D) patients, but the low survival of the transplanted cells hinder the therapeutic efficacy. In this study, we 3D-printed an encapsulation system containing β-like cells and microvascular fragments (MVF), to create a retrivable microdevice with vascularized islets in vivo for T1D therapy. The functional β-like cells were differentiated from the urine epithelial cell-derived induced pluripotent stem cells (UiPSCs).

Intradermal Delivery of Cell Vaccine via Ice Microneedles for Cancer Treatment.

The living tumor cell vaccine (TCV) holds a promise for cancer immunotherapy. Microneedle arrays provide a tool to improve the immune response of vaccines by the intradermal administration in a painless manner. However, it remains challenges for microneedle arrays to deliver the living TCV intradermally.

Gold Nano Frameworks with Mesopores for Synergistic Immune-Thermal Therapy in Hepatic Carcinoma: A Paradigm Shift in Immune Checkpoint Blockade.

Immune checkpoint blockade (ICB) therapy, while showing promise in various cancers, exhibits limited effectiveness in hepatic carcinoma due to the tumor's immunosuppressive microenvironment (TME) and challenges associated with immune cell infiltration. Efforts to transform the "cold" TME into an "inflamed" state, notably through chemo-immunotherapy, have sparked interest due to their potential to induce immunogenic cell death and augment the infiltration of cytotoxic T lymphocytes (CTLs). Nonetheless, the efficacy of chemo-immunotherapy is often compromised by suboptimal pharmacokinetics, poor tumor accumulation, and off-target toxicity.

NIR-II-Absorbing NDI Polymer with Superior Penetration Depth for Enhanced Photothermal Therapy Efficiency of Hepatocellular Carcinoma.

Introduction: Hepatocellular carcinomas (HCC) have a high morbidity and mortality rate, and is difficult to cure and prone to recurrence when it has already developed. Therefore, early detection and efficient treatment of HCC is necessary.

Methods: In this study, we synthesized a novel NDI polymer with uniform size, long-term stability, and high near-infrared two-zone (NIR-II) absorption efficiency, which can greatly enhance the effect of photothermal therapy (PTT) after intravenous injection into Huh-7-tumor bearing mice.

Dissolving microneedles for transdermal drug delivery in cancer immunotherapy.

Immunotherapy is an important approach in cancer treatment. Transdermal administration is emerging as a promising method for delivering immunotherapeutics. Dissolving microneedles are made mainly of soluble or biodegradable polymers and have garnered widespread attention due to their painlessness, safety, convenience, excellent drug loading capacity, and easy availability of various materials, making them an ideal transdermal delivery system.

Non-viral Gene Therapy for Melanoma Using Lysenin from Eisenia Foetida.

Earthworms, long utilized in traditional medicine, serve as a source of inspiration for modern therapeutics. Lysenin, a defensive factor in the coelom fluid of the earthworm Eisenia fetida, has multiple bioactivities. However, the inherent toxicity of Lysenin as a pore-forming protein (PFP) restricts its application in therapy.

Advanced Nanomaterials in Medical 3D Printing.

3D printing is now recognized as a significant tool for medical research and clinical practice, leading to the emergence of medical 3D printing technology. It is essential to improve the properties of 3D-printed products to meet the demand for medical use. The core of generating qualified 3D printing products is to develop advanced materials and processes.

silk fibroin bioinks for digital light processing 3D printing.

The application of three-dimensional (3D) bioprinting has increased in the biomedical field. The lack of bioinks with both biocompatibility and printability is still a problem to be solved. Silk fibroin materials have good biocompatibility and have a broad application prospect in the field of biomedical materials.

3D printed elastic hydrogel conduits with 7,8-dihydroxyflavone release for peripheral nerve repair.

Nerve guide conduit is a promising treatment for long gap peripheral nerve injuries, yet its efficacy is limited. Drug-releasable scaffolds may provide reliable platforms to build a regenerative microenvironment for nerve recovery. In this study, an elastic hydrogel conduit encapsulating with prodrug nanoassemblies is fabricated by a continuous 3D printing technique for promoting nerve regeneration.

3D printing of microneedle arrays for hair regeneration in a controllable region.

Hair loss is a common skin disease that causes intense emotional suffering. Hair regeneration in a personalized area is highly desirable for patients with different balding conditions. However, the existing pharmaceutical treatments have difficulty precisely regenerating hair in a desired area.

Biomimetic Peridontium Patches for Functional Periodontal Regeneration.

The unique structure of the periodontium, including the alveolar bone, cementum, and periodontal ligament (PDL), presents difficulties for the regeneration of its intricate organization. Irreversible structural breakdown of the periodontium increases the risk of tooth loosening and loss. Although the current therapies can restore the periodontal hard tissues to a certain extent, the PDL with its high directionality of multiple groups with different orientations and functions cannot be reconstructed.

A sulfhydryl blocking reagent BT-4 sensitizes cisplatin-based micelle prodrugs for efficient treatment of breast cancer.

Detoxification of glutathione (GSH) and insufficient cellular uptake of cisplatin (CDDP) severely compromised the therapeutic efficacy of CDDP. Here, a nano-delivery system (BT-4@PtPPNPs) for CDDP prodrug (C16-Pt(Ⅳ)-PEG) based on a novel sulfhydryl blocking reagent methyl 2-(methylsulfonyl) benzothiazole-6-carboxylate (BT-4) was developed. On the one hand, BT-4 can deplete GSH in tumor cells by directly interacting with reactive sulfhydryl group on GSH, thereby increasing the cytotoxicity of CDDP.

Acquired semi-squamatization during chemotherapy suggests differentiation as a therapeutic strategy for bladder cancer.

Cisplatin-based chemotherapy remains the primary treatment for unresectable and metastatic muscle-invasive bladder cancers (MIBCs). However, tumors frequently develop chemoresistance. Here, we established a primary and orthotopic MIBC mouse model with gene-edited organoids to recapitulate the full course of chemotherapy in patients.

Strategies for improving adipose-derived stem cells for tissue regeneration.

Adipose-derived stem cells (ADSCs) have promising applications in tissue regeneration. Currently, there are only a few ADSC products that have been approved for clinical use. The clinical application of ADSCs still faces many challenges.

3D-printed microneedle arrays for drug delivery.

Microneedle arrays provide an efficient tool for transdermal drug delivery in a minimally invasive and painless manner, showing great potential applications in medicine. However, it remains challenging to fabricate the desired microneedle arrays, because of their micron-scale size and fine structure. Novel manufacturing technologies are very wanted for the development of microneedle arrays, which would solidly advance the clinical translation of microneedle arrays.

Fast Customization of Hollow Microneedle Patches for Insulin Delivery.

Hollow microneedle patches (HMNPs) have great promise for efficient and precise transdermal drug delivery in a painless manner. Currently, the clinical application of HMNPs is restricted by its complex manufacturing processes. Here, we use a new three-dimensional (3D) printing technology, static optical projection lithography (SOPL), for the fast fabrication of HMNPs.

3D Printing Mini-Capsule Device for Islet Delivery to Treat Type 1 Diabetes.

Transplantation of encapsulated islets has been shown to hold a promising potential treatment for type 1 diabetes (T1D). However, there are several obstacles to overcome, such as immune rejection by the host of the grafts, sustainability of islet function, and retrievability or replacement of the encapsulated system, hinder their clinical applications. In this study, mini-capsule devices containing islets were fabricated by using digital light processing (DLP) 3D printing.

Nerve transfer with 3D-printed branch nerve conduits.

Background: Nerve transfer is an important clinical surgical procedure for nerve repair by the coaptation of a healthy donor nerve to an injured nerve. Usually, nerve transfer is performed in an end-to-end manner, which will lead to functional loss of the donor nerve. In this study, we aimed to evaluate the efficacy of 3D-printed branch nerve conduits in nerve transfer.

Histones released by NETosis enhance the infectivity of SARS-CoV-2 by bridging the spike protein subunit 2 and sialic acid on host cells.

Neutrophil extracellular traps (NETs) can capture and kill viruses, such as influenza viruses, human immunodeficiency virus (HIV), and respiratory syncytial virus (RSV), thus contributing to host defense. Contrary to our expectation, we show here that the histones released by NETosis enhance the infectivity of SARS-CoV-2, as found by using live SARS-CoV-2 and two pseudovirus systems as well as a mouse model. The histone H3 or H4 selectively binds to subunit 2 of the spike (S) protein, as shown by a biochemical binding assay, surface plasmon resonance and binding energy calculation as well as the construction of a mutant S protein by replacing four acidic amino acids.

Fast Customization of Microneedle Arrays by Static Optical Projection Lithography.

Customized microneedle arrays (CMNAs) hold great promise for precise transdermal delivery in a minimally invasive manner. Currently, the fast customization of microneedle arrays remains a great challenge. Here, we show a static optical projection lithography (SOPL) technology for fast 3D printing CMNAs.

Targeted Nanotherapeutics Using LACTB Gene Therapy Against Melanoma.

Introduction: β-lactamase (LACTB) is a tumor suppressor gene in various tumors including melanoma. However, it remains challenging to efficiently deliver the LACTB gene into melanoma. Recently, we designed a nonviral nanocarrier iRGD/DOTAP/MPEG-PDLLA (iDPP) that could deliver gene targetedly to melanoma efficiently without obvious adverse effects.

Expression of Microtubule-Associated Proteins in Relation to Prognosis and Efficacy of Immunotherapy in Non-Small Cell Lung Cancer.

Background: Microtubule-associated proteins (MAPs) have been considered to play significant roles in the tumor evolution of non-small cell lung cancer (NSCLC). Nevertheless, mRNA transcription levels and prognostic value of distinct MAPs in patients with NSCLC remain to be clarified.

Methods: In this study, the Oncomine database, Gene Expression Profiling Interactive Analysis (GEPIA) database, and Human Protein Atlas were utilized to analyze the relationship between mRNA/protein expression of different MAPs and clinical characteristics in NSCLC patients, including tumor type and pathological stage.