Influence of storage and buffer composition on the mechanical behavior of flowing red blood cells.

On-chip study of blood flow has emerged as a powerful tool to assess the contribution of each component of blood to its overall function. Blood has indeed many functions, from gas and nutrient transport to immune response and thermal regulation. Red blood cells play a central role therein, in particular through their specific mechanical properties, which directly influence pressure regulation, oxygen perfusion, or platelet and white cell segregation toward endothelial walls.

Multi-laboratory validation of DNAxs including the statistical library DNAStatistX.

This study describes a multi-laboratory validation of DNAxs, a DNA eXpert System for the data management and probabilistic interpretation of DNA profiles [1], and its statistical library DNAStatistX to which, besides the organising laboratory, four laboratories participated. The software was modified to read multiple data formats and the study was performed prior to the release of the software to the forensic community. The first exercise explored all main functionalities of DNAxs with feedback on user-friendliness, installation and general performance.

Mechanical Signature of Red Blood Cells Flowing Out of a Microfluidic Constriction Is Impacted by Membrane Elasticity, Cell Surface-to-Volume Ratio and Diseases.

Despite the fact that Red Blood Cells (RBCs) have been intensively studied in the past 50 years to characterize mechanical phenotypes associated with both healthy and pathological states, only ektacytometry (i.e., laser diffractometry) is currently used by hematologists to screen for RBC membrane disorders.

Sequenced-based French population data from 169 unrelated individuals with Verogen's ForenSeq DNA signature prep kit.

Massively Parallel Sequencing (MPS) applied to forensic genetics allows the simultaneous analysis of hundreds of genetic markers and the access to full amplicon sequences which help to increase available allele diversity. Meanwhile, sequence variation within the repeat regions represents the majority of the allele diversity, flanking regions adjacent to the repeat core provide an additional degree of variation. The forensic genetics community needs access to population data, from relevant parts of the world that contain this new sequence diversity in order to perform statistical calculations.

Impact of surface-area-to-volume ratio, internal viscosity and membrane viscoelasticity on red blood cell deformability measured in isotonic condition.

Osmotic gradient ektacytometry is the gold standard to assess red blood cell (RBC) deformability. It has been proposed that, when measured in isotonic condition, RBC deformability at low shear stress would depend on membrane elasticity while it would be influenced by internal viscosity when measured at high shear stress, but this hypothesis needs to be further addressed. Healthy RBCs were rigidified by treatment with lysolecithine (LPC), diamide or nystatine associated with hyperosmolar solutions (OSMO), which reduces membrane surface area, decreases membrane elasticity or promotes cell dehydration, respectively.

Automation and developmental validation of the ForenSeq DNA Signature Preparation kit for high-throughput analysis in forensic laboratories.

Massively parallel sequencing (MPS) applications in forensic science highlight the advantages of this technique compared to capillary electrophoresis (CE). The multiplexing of a wide range of genetic markers and access to the full amplicon sequence, allowing the detection of isoalleles, make it a very promising tool which could be applied to the most challenging casework DNA samples. However, the complexity of the manual library preparation protocol, potential DNA contamination and sample tracking issues are the main reasons why forensic scientists still hesitate to implement MPS analytical workflows in their laboratory.

Dielectrophoretic capture of low abundance cell population using thick electrodes.

Enrichment of rare cell populations such as Circulating Tumor Cells (CTCs) is a critical step before performing analysis. This paper presents a polymeric microfluidic device with integrated thick Carbon-PolyDimethylSiloxane composite (C-PDMS) electrodes designed to carry out dielectrophoretic (DEP) trapping of low abundance biological cells. Such conductive composite material presents advantages over metallic structures.

Magnetophoretic manipulation in microsystem using carbonyl iron-polydimethylsiloxane microstructures.

This paper reports the use of a recent composite material, noted hereafter i-PDMS, made of carbonyl iron microparticles mixed in a PolyDiMethylSiloxane (PDMS) matrix, for magnetophoretic functions such as capture and separation of magnetic species. We demonstrated that this composite which combine the advantages of both components, can locally generate high gradients of magnetic field when placed between two permanent magnets. After evaluating the magnetic susceptibility of the material as a function of the doping ratio, we investigated the molding resolution offered by i-PDMS to obtain microstructures of various sizes and shapes.

Gel phase vesicles buckle into specific shapes.

Osmotic deflation of giant vesicles in the rippled gel phase P(β') gives rise to a large variety of novel faceted shapes. These shapes are also found from a numerical approach by using an elastic surface model. A shape diagram is proposed based on the model that accounts for the vesicle size and ratios of three mechanical constants: in-plane shear elasticity and compressibility (usually neglected) and out-of-plane bending of the membrane.

Coagulation dynamics of a blood sample by multiple scattering analysis.

We report a new technique to measure coagulation dynamics on whole-blood samples. The method relies on the analysis of the speckle figure resulting from a whole-blood sample mixed with coagulation reagent and introduced in a thin chamber illuminated with a coherent light. A dynamic study of the speckle reveals a typical behavior due to coagulation.

Ultrasound internal tattooing.

Purpose: The ability of remotely tagging tissues in a controlled and three-dimensional manner during preoperative imaging could greatly help surgeons to identify targets for resection. The authors' objective is to selectively and noninvasively deposit markers under image guidance for such internal tattooing.

Methods: This study describes the production of new ultrasound-inducible droplets carrying large payloads of fluorescent markers and the in vivo proof of concept of their remote and controlled deposition via focused ultrasound.

Drop production and tip-streaming phenomenon in a microfluidic flow-focusing device via an interfacial chemical reaction.

Microfluidic flow-focusing technology is used to investigate the effect on drop formation due to the production of a surfactant via an interfacial chemical reaction. The reactants are an aqueous solution of sodium hydroxide (NaOH) and a mixture of oleic acid (C(17)H(33)-COOH) and mineral oil, for the dispersed and continuous phase fluids, respectively, at concentration < or = 5 mM. In the absence of a chemical reaction, the drop shapes remain constant from just after breakup into droplets down at the flow-focusing nozzle until the drops exit the channel.

Cellular-scale hydrodynamics.

Microfluidic tools are providing many new insights into the chemical, physical and physicochemical responses of cells. Both suspension-level and single-cell measurements have been studied. We review our studies of these kinds of problems for red blood cells with particular focus on the shapes of individual cells in confined geometries, the development and use of a 'differential manometer' for evaluating the mechanical response of individual cells or other objects flowing in confined geometries, and the cross-streamline drift of cells that pass through a constriction.

Swinging of red blood cells under shear flow.

We reveal that under moderate shear stress (etagamma[over ] approximately 0.1 Pa) red blood cells present an oscillation of their inclination (swinging) superimposed to the long-observed steady tank treading (TT) motion. A model based on a fluid ellipsoid surrounded by a viscoelastic membrane initially unstrained (shape memory) predicts all observed features of the motion: an increase of both swinging amplitude and period (1/2 the TT period) upon decreasing etagamma[over ], a etagamma[over ]-triggered transition toward a narrow etagamma[over ] range intermittent regime of successive swinging and tumbling, and a pure tumbling at low etagamma[over ] values.

Geometrical focusing of cells in a microfluidic device: an approach to separate blood plasma.

It is well known that when a suspension of cells flows in small vessels (arterioles or venules), there exists a cell-free layer of a few microns adjacent to the vascular walls. Using an in vitro model, we show experimentally that for a fixed flow rate a geometrical constriction in the flow can artificially enhance the cell-free layer. Also, we show that rapid variation of the geometry coupled to the deformability of the cells can dramatically modify their spatial distribution in the channel.

High-speed microfluidic differential manometer for cellular-scale hydrodynamics.

We propose a broadly applicable high-speed microfluidic approach for measuring dynamical pressure-drop variations along a micrometer-sized channel and illustrate the potential of the technique by presenting measurements of the additional pressure drop produced at the scale of individual flowing cells. The influence of drug-modified mechanical properties of the cell membrane is shown. Finally, single hemolysis events during flow are recorded simultaneously with the critical pressure drop for the rupture of the membrane.

Microfluidic flow focusing: drop size and scaling in pressure versus flow-rate-driven pumping.

We experimentally study the production of micrometer-sized droplets using microfluidic technology and a flow-focusing geometry. Two distinct methods of flow control are compared: (i) control of the flow rates of the two phases and (ii) control of the inlet pressures of the two phases. In each type of experiment, the drop size l, velocity U and production frequency f are measured and compared as either functions of the flow-rate ratio or the inlet pressure ratio.