Preparation and Characterization of a Rifampicin Coamorphous Material with Tromethamine Coformer: An Experimental-Theoretical Study.

Rifampicin (RIF) is an antibiotic used to treat tuberculosis and leprosy. Even though RIF is a market-available drug, it has a low aqueous solubility, hindering its bioavailability. Among the strategies for bioavailability improvement of poorly soluble drugs, coamorphous systems have been revealed as an alternative in the increase of the aqueous solubility of drug systems and at the same time also increasing the amorphous state stability and dissolution rate when compared with the neat drug.

A Comprehensive Review on Deep Eutectic Solvents and Its Use to Extract Bioactive Compounds of Pharmaceutical Interest.

The extraction of bioactive compounds of pharmaceutical interest from natural sources has been significantly explored in recent decades. However, the extraction techniques used were not very efficient in terms of time and energy consumption; additionally, the solvents used for the extraction were harmful for the environment. To improve the environmental impact of the extractions and at the same time increase the extraction yields, several new extraction techniques were developed.

A New Microwave-Assisted Protocol for Cellulose Extraction from Eucalyptus and Pine Tree Wood Waste.

An enormous interest in the development of efficient protocols for cellulose extraction has been demonstrated in the last few years, although usually based on non-sustainable chemical and thermal approaches. In this work, we propose a new and more sustainable method for cellulose extraction from eucalyptus and pine tree wood waste products exclusively performed using microwave-assisted radiation. The methodology includes three main steps: (i) alkaline treatment; (ii) bleaching I, using HO; and (iii) bleaching II, an acidic treatment.

Subcritical Water Extraction to Valorize Grape Biomass-A Step Closer to Circular Economy.

With the increase in the world population, the overexploitation of the planet's natural resources is becoming a worldwide concern. Changes in the way humankind thinks about production and consumption must be undertaken to protect our planet and our way of living. For this change to occur, sustainable development together with a circular economic approach and responsible consumption are key points.

Therapeutic Liquid Eutectic Solvents in Lipid Nanoparticles as Drug Vehicles-A Proof of Concept.

Tuberculosis is an infectious disease caused by the bacterial complex . Despite the decline in the incidence and mortality of this disease over the years, the emergence of new strains of tuberculosis resistant to existing tuberculostatic drugs is currently one of the largest public health problems. The engineering and development of new drugs is a complex process; therefore, the modification and enhancement of the drugs already marked is a better and faster solution.

Solids Turn into Liquids-Liquid Eutectic Systems of Pharmaceutics to Improve Drug Solubility.

The low solubility of active pharmaceutical ingredients (APIs) is a problem in pharmaceutical development. Several methodologies can be used to improve API solubility, including the use of eutectic systems in which one of the constituents is the API. This class of compounds is commonly called Therapeutic Deep Eutectic Systems (THEDES).

Structural, thermal, vibrational, solubility and DFT studies of a tolbutamide co-amorphous drug delivery system for treatment of diabetes.

Among the strategies for bioavailability improvement of poorly soluble drugs, co-amorphous systems have revealed to have a significant impact in the increase of the aqueous solubility of the drug, and at the same time increasing the amorphous state stability and dissolution rate when compared with the neat drug. Tolbutamide (TBM) is an oral hypoglycemic drug largely used in the treatment of type II Mellitus diabetes. TBM is a class II drug according to the Biopharmaceutical Classification System, meaning that it has low solubility and higher permeability.

Mechanochemistry in Portugal-A Step towards Sustainable Chemical Synthesis.

In Portugal, publications with mechanochemical methods date back to 2009, with the report on mechanochemical strategies for the synthesis of metallopharmaceuticals. Since then, mechanochemical applications have grown in Portugal, spanning several fields, mainly crystal engineering and supramolecular chemistry, catalysis, and organic and inorganic chemistry. The area with the most increased development is the synthesis of multicomponent crystal forms, with several groups synthesizing solvates, salts, and cocrystals in which the main objective was to improve physical properties of the active pharmaceutical ingredients.

Determination of co-crystal phase purity by mid infrared spectroscopy and multiple curve resolution.

Multivariate Curve Resolution (MCR) was used to determine the phase purity of pharmaceutical co-crystals from mid infrared spectra. An in-silico coformer screening was used to choose one of ten potential coformers. This analysis used quantum chemistry simulation to predict which coformers are thermodynamically inclined to form cocrystals with the model drug, hydrochlorothiazide.

How can oral paediatric formulations be improved? A challenge for the XXI century.

Paediatric oral formulations need to be improved. This is an indisputable fact that has gain attention from the regulators, the medical staff, and researchers. The lack of adequate medicines developed for children, resulted in several off-label and unlicensed prescriptions, increasing the risks of adverse drug reactions.

Considerations on high-throughput cocrystals screening by ultrasound assisted cocrystallization and vibrational spectroscopy.

For industrial production of cocrystals, screening phase is essential, helping to become the process faster, more effective and efficient, reducing the quantity of reactants used and associated costs. High-throughput screening (HTS) methods can analyze a wide range of compounds simultaneously. As an answer to industrial necessity of more efficient screening methods, different methods must be developed and optimized.

Optimization of Experimental Settings for the Assessment of Reactive Oxygen Species Production by Human Blood.

The purpose of an experimental design is to improve the productivity of experimentation. It is an efficient procedure for planning experiments, so the data obtained can be analyzed to yield a valid and objective conclusion. This approach has been used as an important tool in the optimization of different analytical approaches.

Vibrational Spectroscopy for Cocrystals Screening. A Comparative Study.

A recurrent problem faced by the pharmaceutical industry when formulating drug products concerns poorly soluble drugs, which, despite having desirable pharmacological activity, present limited bioavailability. Cocrystallization is growing up as a possible approach to tackle this problem. Cocrystals are crystalline materials comprising at least two components, solid at room temperature, and held together by non-covalent bonds.

In-Depth Evaluation of Data Collected During a Continuous Pharmaceutical Manufacturing Process: A Multivariate Statistical Process Monitoring Approach.

The present work presents an in-depth evaluation of continuously collected data during a twin-screw granulation and drying process performed on a continuous manufacturing line. During operation, the continuous line logs 49 univariate process variables, hence generating a large amount of data. Three identical 5-h continuous manufacturing runs were performed.

Pharmaceutical cocrystallization techniques. Advances and challenges.

Cocrystals are homogenous (single-phase) crystalline structures composed by two or more components in a definite stoichiometric ratio bonded together by noncovalent bonds. Pharmaceutical industry has been showing interest in cocrystals due to their ability to improve active pharmaceutical ingredients (API's) properties, such as solubility, dissolution, bioavailability, stability and processability. The necessity for high-throughput screening methods and methods capable of producing cocrystals in an industrial scale still hinders the use of cocrystals by the pharmaceutical industry.

Synthesis of a Glibenclamide Cocrystal: Full Spectroscopic and Thermal Characterization.

A cocrystal of glibenclamide, an antidiabetic drug classified as type II compound according to the Biopharmaceutics Classification System, has been synthesized using tromethamine as coformer in 1:1 molar ratio, by slow solvent evaporation cocrystalization. The cocrystal obtained was characterized by X-ray powder diffraction, differential scanning calorimetry, Raman, mid infrared, and near-infrared spectroscopy. The results consistently show the formation of a cocrystal between active pharmaceutical ingredients and conformer with the synthons corresponding to hydrogen bonding between hydrogen in amines of tromethamine and carbonyl and sulfonyl groups in glibenclamide.

Merging vibrational spectroscopic data for wine classification according to the geographic origin.

The wine making procedure is no longer a secret and it is nowadays well described and repeated around the world. Nevertheless, wines present unique features, strongly associated with their geographic origin. Classification systems were developed to catalogue wines according to the provenance, and are currently established by official authorities in order to ensure wine authenticity.

Statistical process control of cocrystallization processes: A comparison between OPLS and PLS.

Orthogonal partial least squares regression (OPLS) is being increasingly adopted as an alternative to partial least squares (PLS) regression due to the better generalization that can be achieved. Particularly in multivariate batch statistical process control (BSPC), the use of OPLS for estimating nominal trajectories is advantageous. In OPLS, the nominal process trajectories are expected to be captured in a single predictive principal component while uncorrelated variations are filtered out to orthogonal principal components.

Near infrared spectroscopy to monitor drug release in-situ during dissolution tests.

Dissolution tests can be used to demonstrate suitable in vivo drug release through in vivo/in vitro correlations. This work explores the possibility of using near infrared spectroscopy (NIRS) to monitor in-situ dissolution tests. It aims at expanding surrogate methods in quality control of drug products.

Batch Statistical Process Monitoring Approach to a Cocrystallization Process.

Cocrystals are defined as crystalline structures composed of two or more compounds that are solid at room temperature held together by noncovalent bonds. Their main advantages are the increase of solubility, bioavailability, permeability, stability, and at the same time retaining active pharmaceutical ingredient bioactivity. The cocrystallization between furosemide and nicotinamide by solvent evaporation was monitored on-line using near-infrared spectroscopy (NIRS) as a process analytical technology tool.

Online monitoring of P(3HB) produced from used cooking oil with near-infrared spectroscopy.

Online monitoring process for the production of polyhydroxyalkanoates (PHA), using cooking oil (UCO) as the sole carbon source and Cupriavidus necator, was developed. A batch reactor was operated and hydroxybutyrate homopolymer was obtained. The biomass reached a maximum concentration of 11.

A PAT approach for the on-line monitoring of pharmaceutical co-crystals formation with near infrared spectroscopy.

Cocrystals represent a class of crystalline solids consisting of two or more molecular species usually held together by non-covalent bonds. Pharmaceutical cocrystals can alter the physicochemical properties of the active pharmaceutical ingredient to improve solubility, dissolution rate, particle properties and stability. This work presents a process analytical technology (PAT) approach to monitor on-line the cocrystallization of furosemide and adenine by solvent evaporation using near infrared spectroscopy (NIRS).

Evaluation of green coffee beans quality using near infrared spectroscopy: a quantitative approach.

Characterisation of coffee quality based on bean quality assessment is associated with the relative amount of defective beans among non-defective beans. It is therefore important to develop a methodology capable of identifying the presence of defective beans that enables a fast assessment of coffee grade and that can become an analytical tool to standardise coffee quality. In this work, a methodology for quality assessment of green coffee based on near infrared spectroscopy (NIRS) is proposed.

A batch modelling approach to monitor a freeze-drying process using in-line Raman spectroscopy.

Freeze-drying or lyophilisation is a batch wise industrial process used to remove water from solutions, hence stabilizing the solutes for distribution and storage. The objective of the present work was to outline a batch modelling approach to monitor a freeze-drying process in-line and in real-time using Raman spectroscopy. A 5% (w/v) D-mannitol solution was freeze-dried in this study as model.