Increasing efficiency and treatment volumes for sonolysis of per- and poly-fluorinated substances, applied to aqueous film-forming foam.

Sonolysis of per- and polyfluoroalkyl substances (PFAS) has recently matured to field studies, treating real world contamination. However, efficient sonolysis reactor designs are poorly researched. Moreover, the variety and complexity of PFAS pollution slows reactor optimisation and scale-up.

Flow and temporal effects on the sonolytic defluorination of perfluorooctane sulfonic acid.

The removal of per- and polyfluoroalkyl substance (PFAS) pollution from the environment is a globally pressing issue, due to some PFAS' recalcitrant, bioaccumulative, and carcinogenic nature. Destruction via ultrasonic waves (sonolysis) is a promising contender for industrialisation due to; moderate power consumption, applicability to several PFAS and sample types, and limited by-products. Liquid flow rate through an ultrasonic reactor can affect the size, shape, and spatial distribution of ultrasonic cavities and hence their chemical activity.

Impact of sonication power on the degradation of paracetamol under single- and dual-frequency ultrasound.

The effects of sonication power on the ultrasonic cavitation and sonochemistry as well as the degradation of paracetamol were studied and compared for single- and dual-frequency sonoreactors. For the single-frequency sonication, a 500 kHz plate transducer was employed, with three different calorimetric powers of 8.4, 16.

A fundamental study on the degradation of paracetamol under single- and dual-frequency ultrasound.

The degradation of paracetamol, a widely found emerging pharmaceutical contaminant, was investigated under a wide range of single-frequency and dual-frequency ultrasonic irradiations. For single-frequency ultrasonic irradiation, plate transducers of 22, 98, 200, 300, 400, 500, 760, 850, 1000, and 2000 kHz were employed and for dual-frequency ultrasonic irradiation, the plate transducers were coupled with a 20 kHz ultrasonic horn in opposing configuration. The sonochemical activity was quantified using two dosimetry methods to measure the yield of HO• and HO separately, as well as sonochemiluminescence measurement.

Sonolysis of per- and poly fluoroalkyl substances (PFAS): A meta-analysis.

Human ingestion of per- and polyfluoroalkyl substances (PFAS) from contaminated food and water is linked to the development of several cancers, birth defects and other illnesses. The complete mineralisation of aqueous PFAS by ultrasound (sonolysis) into harmless inorganics has been demonstrated in many studies. However, the range and interconnected nature of reaction parameters (frequency, power, temperature etc.

Sonocrystallisation of ZIF-8 in water with high excess of ligand: Effects of frequency, power and sonication time.

A systematic study on the sonocrystallisation of ZIF-8 (zeolitic imidazolate framework-8) in a water-based system was investigated under different mixing speeds, ultrasound frequencies, calorimetric powers and sonication time. Regardless of the synthesis technique, pure crystals of ZIF-8 with high BET (Brunauer, Emmett and Teller) specific surface area (SSA) can be obtained in water after only 5 s. Furthermore, 5 s sonication produced even smaller crystals (~0.

The application of flow to an ultrasonic horn system: Phenol degradation and sonoluminescence.

Sonochemical (SC) processes can be increased with the application of fluid flow due to changes in bubble characteristics. In this work, a novel flow through set-up was applied to an ultrasonic horn system to investigate the effects of flow on the degradation of phenol. KI dosimetry and sonochemiluminescence (SCL) were also analysed, under the same conditions, to provide comparison of degradation to other SC processes.

Ultrasonic degradation of perfluorooctane sulfonic acid (PFOS) correlated with sonochemical and sonoluminescence characterisation.

Sonolysis has been proposed as a promising treatment technology to remove per- and polyfluoroalkyl substances (PFASs) from contaminated water. The mechanism of degradation is generally accepted to be high temperature pyrolysis at the bubble surface with dependency upon surface reaction site availability. However, the parametric effects of the ultrasonic system on PFAS degradation are poorly understood, making upscale challenging and leading to less than optimal use of ultrasonic energy.

Flow effects on phenol degradation and sonoluminescence at different ultrasonic frequencies.

Current literature shows a direct correlation between the sonochemical (SC) process of iodide oxidation and the degradation of phenol solution. This implies phenol degradation occurs primarily via oxidisation at the bubble surface. There is no work at present which considers the effect of fluid flow on the degradation process.

Disparities between sonoluminescence, sonochemiluminescence and dosimetry with frequency variation under flow.

The effects of ultrasound (frequency and pressure amplitude) and external parameters (fluid flow rate and surface stabilisation) on active sonoluminescence (SL) and sonochemical (SC) bubbles were investigated using common characterisation techniques. The SL from water, sonochemiluminescence (SCL) from luminol solutions and iodide dosimetry were studied at flow rates of 0, 24, 228 and 626 mL/min at 44, 300 and 1000 kHz with and without surface stabilisation. An increase in flow, in general, decreased SL, SCL and dosimetry caused by a reduction in collapse intensity.

Combined effects of flow, surface stabilisation and salt concentration in aqueous solution to control and enhance sonoluminescence.

Sonoluminescence (SL) intensity can be increased with potassium iodide (KI) concentration, attributed to a reduction in the gas concentration of solution. However, bubble properties and active bubble distributions at different frequencies and powers also influence SL intensities. Hence, to elucidate how salt concentration affects SL intensity, a systematic study with parametric variation was undertaken.

A review on possible mechanisms of sonocrystallisation in solution.

Sonocrystallisation is the application of ultrasound to the crystallisation process. The benefits obtained by sonication have been widely studied since the beginning of the 20th century and so far it is clear that ultrasound can be a very useful tool for enhancing crystallisation and controlling the properties of the final product. Crystal size, polymorphs, purity, process repeatability and lower induction time are only some of the advantages of sonocrystallisation.

A parametric review of sonochemistry: Control and augmentation of sonochemical activity in aqueous solutions.

In this review the phenomenon of ultrasonic cavitation and associated sonochemistry is presented through system parameters. Primary parameters are defined and considered, namely; pressure amplitude, frequency and reactor design; including transducer type, signal type, vessel-transducer ratio, liquid flow, liquid height, liquid temperature and the presence of a reflective plate. Secondary parameters are similarly characterised and involve the use of gas and liquid additives to influence the chemical and physical environments.

Supply Chain Optimisation for an Ultrasound-Organosolv Lignocellulosic Biorefinery: Impact of Technology Choices.

Conversion of lignocellulose to value-added products is normally focussed on fuel production via ethanol or heat. In this work, a techno-economic assessment of a biorefinery with three product streams, cellulose, hemicellulose and lignin is presented. Moreover, the techno-economic assessment is evaluated in the context of the supply chain through optimisation.

A phenomenological investigation into the opposing effects of fluid flow on sonochemical activity at different frequency and power settings. 2. Fluid circulation at high frequencies.

Sonochemical activity is dependent on flow patterns within the reactor and either no affect or a decrease in activity was observed at 376, 995, and 1179 kHz from overhead stirring. The interaction of fluid flow with ultrasound was further investigated in this study with circulatory flow. The effect of fluid circulation on radical production was investigated at two circulation speeds, with and without surface stabilisation.

Manipulation of ultrasonic effects on lignocellulose by varying the frequency, particle size, loading and stirring.

The parameters, including ultrasonic frequency, still versus stirring, biomass particle size and biomass loading were concurrently investigated for the ultrasonic treatment of wheat straw. Experiments were conducted at three different frequencies; 40, 376, and 995 kHz using three different solid to liquid ratios, 1/50, 1/20, and 1/15(g/ml), with and without mechanical stirring. Additional treatments in different particle size ranges, 0-0.

A phenomenological investigation into the opposing effects of fluid flow on sonochemical activity at different frequency and power settings. 1. Overhead stirring.

The effect of flow in an ultrasonic reactor is an important consideration for practical applications and for the scale-up of ultrasonic processing. Previous literature on the influence of flow on sonochemical activity has reported conflicting results. Therefore, this work examined the effect of overhead stirring at four different frequencies, 40, 376, 995 and 1179 kHz, in two different reactor configurations.

Formation of methanol from methane and water in an electrical discharge.

Matrix isolation FTIR experiments have shown that methanol is a major product when argon gas doped with water and methane is exposed to an electrical discharge and condensed to a solid matrix at 11 K. Experiments with (2)H, (17)O and (18)O-labeled isotopologues show the mechanism for the methanol production is likely to be insertion of an excited oxygen atom in the (1)D state into a C-H bond of a methane molecule. In light of these experiments, the possibility of oxygen atom insertion into methane should be considered as a possible mechanism for the production of methanol in interstellar ices.