Strategy for the Preparation of ZnS/ZnO Composites Derived from Metal-Organic Frameworks toward Lithium Storage.

The synergistic effect between multicomponent electrode materials often makes them have better lithium storage performance than single-component electrode materials. Therefore, to enhance surface reaction kinetics and encourage electron transfer, using multicomponent anode materials is a useful tactic for achieving high lithium-ion battery performance. In this article, ZnS/ZnO composites were synthesized by solvothermal sulfidation and calcination, with the utilization of metal-organic frameworks acting as sacrificial templates.

Experimental study and mechanism analysis of a pulsed laser cleaning aluminum alloy process.

A pulse laser with a wavelength of 1064 nm and a pulse width of 1 µs was used to experiment on the coating of a 2024 aluminum alloy surface. The removal performance of the pulse laser cleaning coating was explored by a single factor analysis and orthogonally conditions, and the effects of the laser power, scanning speed, and pulse frequency on the quality of laser coating removal were summarized. The mechanisms of pulse laser cleaning the coating were studied.

Metal-organic frameworks-derived MCoO (M = Zn, Ni, Cu) two-dimensional nanosheets as anodes materials to boost lithium storage.

Transition metal oxides (TMOs) have received significant consideration. Because of their enormous theoretical capacity, cheap, and less toxicity. Notably, cobalt-based materials hold promises as negative electrode materials for batteries, but they suffer from less electrical conductivity and significant volume changes during operation.

Prussian blue analogue/KB-derived Ni/Co/KB composite as a superior adsorption-catalysis separator modification material for Li-S batteries.

Lithium‑sulfur batteries (LSBs) are gradually replacing conventional lithium-ion batteries (LIBs), credited to their high theoretical capacity, low cost, and non-toxicity. Nevertheless, the substantial capacity degradation caused by the polysulfide shuttling during charging and discharging has seriously hindered the commercialization of LSBs. Separator modification with functionalized carbon materials has been found to catalyze the breakdown of polysulfides, thereby improving the efficiency of LSBs.

Stress Evaluation of Welded Joints with Metal Magnetic Memory Testing Based on Tension-Compression Fatigue Test.

Metal magnetic memory testing (MMMT) is an effective nondestructive technique for fatigue damage monitoring of weldments because of its capacity for stress evaluation. An experimental investigation of the effect of the applied fatigue stress on MMMT signals, including the tangential component and the normal component , during tension-compression fatigue tests in welded joints was carried out systematically. The and signals at different fatigue cycles and fatigue stresses were collected and analyzed, and the results showed that there was a peak of and abnormal peaks of that existed at the welded joint before loading.

Development and Verification Experiment of In-Situ Friction Experiment Device for Simulating UV Irradiation in Space.

In order to explore the influence of space ultraviolet radiation on spacecraft lubricating materials, an in-situ friction experimental device simulating space ultraviolet radiation was developed in the laboratory, and the experimental verification was carried out. This paper firstly introduced the design index, structure and working principle of the space ultraviolet irradiation simulation device, and then calibrated and tested the parameters of the whole device, and also conducted a virtual operation of the device's operation effect by simulation software, and the results showed that it met the design index. Finally, the validation tested of the ultraviolet irradiated in-situ friction experimental device were described in detail.

Research on Atomic Oxygen Erosion Influence of Structural Damage and Tribological Properties of Mo/MoS-Pb-PbS Thin Film.

To investigate atomic oxygen effects on tribological properties of Mo/MoS-Pb-PbS film and further enlarge application range, atomic oxygen exposure tests were carried out for 5 h, 10 h, 15 h, and 20 h by the atomic oxygen simulator with atomic oxygen flux of 2.5 × 10 atoms/cm·s. The exposure time in test was equivalent to the atomic oxygen cumulative flux for 159.

A review on metal-organic framework-derived anode materials for potassium-ion batteries.

In recent years, metal-organic frameworks (MOFs) have been widely used in the field of electrochemical energy storage and conversion because of their excellent properties, such as high specific surface area, adjustable pore size, high porosity, structural diversity, and functional controllability. This paper reviews the applications of metal-organic framework-derived composites such as nitrogen-doped carbon, transition metal sulfides, transition metal selenides, transition metal phosphides and metal selenium compound modifications in potassium ion batteries (PIBs) as anode electrode materials. A variety of MOF-derived composites with different structures and morphologies based on several types of ligands, including 2-methylimidazole, aromatic carboxylic acids, and ferricyanide, have been discussed.

Macroscale Superlubricity on Engineering Steel in the Presence of Black Phosphorus.

Friction and wear are the main reasons for decreasing the lifetime of moving mechanical components and causing energy loss. It is desirable to achieve macroscale superlubricity on industrial materials for minimizing friction. Herein, the two-dimensional material black phosphorus (BP) is prepared as an oil-based nanoadditive in oleic acid (OA) and shown to produce macroscale superlubricity at the steel/steel contact under high pressure.

Rational design of CoN nanoparticle loaded porous carbon as a sulfur matrix for advanced lithium-sulfur batteries.

Lithium-sulfur (Li-S) batteries have a high specific capacity of 1675 mAh g and are considered to be a promising next-generation energy storage system. A sulfur host for loading CoN nanoparticles into porous carbon has been designed as the cathode for high-performance Li-S batteries. The porous carbon successfully confines sulfur and CoN in the pores, and the synergistic effect of physical and chemical adsorption can effectively inhibit the dissolution and diffusion of polysulfides.

Abrasive Wear Resistance of Plasma-Nitrided Ti Enhanced by Ultrasonic Surface Rolling Processing Pre-Treatment.

The objective of the given work was to investigate abrasive wear behaviours of titanium (Ti) treated by ultrasonic surface rolling processing (USRP) pre-treatment and plasma nitriding (PN). Simulated lunar regolith particles (SLRPs) were employed as abrasive materials during characterization of tribological performances. The experimental results showed that SLRPs cause severe abrasive wear on Ti plasma-nitrided at 750 °C via the mechanism of micro-cutting.

Excellent vacuum tribological properties of Pb/PbS film deposited by RF magnetron sputtering and ion sulfurizing.

Soft metal Pb film of 3 μm in thickness was deposited on AISI 440C steel by RF magnetron sputtering, and then some of the Pb film samples were treated by low-temperature ion sulfurizing (LTIS) and formed Pb/PbS composite film. Tribological properties of the Pb and Pb/PbS films were tested contrastively in vacuum and air condition using a self-developed tribometer (model of MSTS-1). Scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) were adopted to analyze the microstructure and chemical construction of the films and their worn surfaces.

Insight into the activity of SARS main protease: Molecular dynamics study of dimeric and monomeric form of enzyme.

The phenomenon that SARS coronavirus main protease (SARS M(pro)) dimer is the main functional form has been confirmed by experiment. However, because of the absence of structural information of the monomer, the reasons for this remain unknown. To investigate it, two molecular dynamics (MD) simulations in water for dimer and monomer models have been carried out, using the crystal structure of protomer A of the dimer as the starting structure for the monomer.