Oxidation Performance of Nano-Layered (AlTiZrHfTa)N/SiN Coatings Deposited by Reactive Magnetron Sputtering.

This work uses the direct current magnetron sputtering (DCMS) of equi-atomic (AlTiZrHfTa) and Si targets in dynamic sweep mode to deposit nano-layered (AlTiZrHfTa)N/SiN refractory high-entropy coatings (RHECs). Transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) are used to investigate the effect of Si addition on the oxidation behavior of the nano-layered coatings. The Si-free nitride coating exhibits FCC structure and columnar morphology, while the Si-doped nitride coatings present a FCC (AlTiZrHfTa)N/amorphous-SiN nano-layered architecture.

A carbon dot-based clay nanocomposite for efficient heavy metal removal.

Carbon dots and their derivatives with fascinating photoluminescence properties have recently attracted tremendous scientific attention. This work describes the preparation of novel fluorescent bentonite clay (B), modified with carbon dot nanomaterials (CDs), and its usage as a lead removal platform. The CDs were prepared using a hydrothermal method from graphitic waste which served as the carbon source material.

Unusual, hierarchically structured composite of sugarcane pulp bagasse biochar loaded with Cu/Ni bimetallic nanoparticles for dye removal.

Biochar-supported nanocatalysts emerged as unique materials for environmental remediation. Herein, sugarcane pulp bagasse (SCPB) was wet-impregnated with Cu(NO)3HO and Ni(NO)6HO, then pyrolyzed at 500 °C, under N, for 1 h. We specifically focused on sugarcane pulp instead of SCB and biochar materials.

Encapsulation of Essential Oil into Mesoporous Silica Particles for the Enhancement of Their Activity against and Its Enniatins Production.

Essential oils (EOs) that have antifungal activity and mycotoxin reduction ability are candidates to develop bioactive alternatives and environmentally friendly treatment against Fusarium species in cereals. However, their practical use is facing limitations such as high volatility, UV sensitivity, and fast oxidation. Encapsulation techniques are supposed to provide protection to the EOs and control their release into the environment.

Green, zero-waste pathway to fabricate supported nanocatalysts and anti-kinetoplastid agents from sugarcane bagasse.

The conversion processes of sugarcane into direct-consumption sugar and juice are generating a tremendous amount of waste, the so-called sugarcane bagasse (SCB). Biochar preparation is among the practical solutions aiming to manage and valorize SCB into high added-value functional material (FM). Herein, we propose a novel zero-waste pathway to fabricate two FMs from one biomass.

Non-doped and transition metal-doped CuO nano-powders: structure-physical properties and anti-adhesion activity relationship.

Bacterial contamination and biofilm formation generate severe problems in many fields. Among these biofilm-forming bacteria, () has emerged as a major cause of nosocomial infection (NI). However, with the dramatic rise in resistance toward conventional antibiotics, there is a pressing need for developing effective anti-biofilms.

Editorial to the Special Issue SELSA: "Sensors for Environmental and Life Science Applications".

"Warn, inform, and prevent" are three essential elements to remember when designing sensors for real-time and in situ monitoring of organic, inorganic, and macromolecular compounds as well as micro-nanoparticles and microorganisms [...

Conceptual Developments of Aryldiazonium Salts as Modifiers for Gold Colloids and Surfaces.

Modified colloids and flat surfaces occupy an important place in materials science research due to their widespread applications. Interest in the development of modifiers that adhere strongly to surfaces relates to the need for stability under ambient conditions in many applications. Diazonium salts have evolved as the primary choice for the modification of surfaces.

Towards Clean and Safe Water: A Review on the Emerging Role of Imprinted Polymer-Based Electrochemical Sensors.

This review critically summarizes the knowledge of imprinted polymer-based electrochemical sensors for the detection of pesticides, metal ions and waterborne pathogenic bacteria, focusing on the last five years. MIP-based electrochemical sensors exhibit low limits of detection (LOD), high selectivity, high sensitivity and low cost. We put the emphasis on the design of imprinted polymers and their composites and coatings by radical polymerization, oxidative polymerization of conjugated monomers or sol-gel chemistry.

Arylated gold nanoparticles have no effect on the adipogenic differentiation of MG-63 cells nor regulate any key signaling pathway during the differentiation.

Objective: MG-63 cells that have osteoblastic and adipogenic differentiation potential were evaluated for internalization, and adipogenic differentiation in the presence and absence of the covalently functionalized aryl gold nanoparticles (AuNPs-CH-4-COOH).

Results: Inductively coupled plasma, flow cytometry and confocal microscopy analyses confirmed that gold nanoparticles were easily internalized by MG-63 cells. The MG-63 cells were differentiated into adipocytes without gold-aryl nanoparticles and with the gold-aryl nanoparticles at 5 µM concentration in both induction and maintenance media.

Data on the fabrication of hybrid calix [4]arene-modified natural bentonite clay for efficient selective removal of toxic metals from wastewater at room temperature.

Fresh water resources on the earth are less than 0.2%; meanwhile, around 80% of the freshwater is consumed daily in agriculture, industries, and household activities [1], [2]. There is an essential need to develop efficient adsorbents for wastewater treatment [1], [2], [3], [4], [5], [6], in this regards, hereafter we present the rationale synthesis and characterization of hybrid natural bentonite clay modified with Calix [4] arene (denoted as B-S-Calix) as efficient adsorbents for toxic metals from wastewater.

Protein-Coated Aryl Modified Gold Nanoparticles for Cellular Uptake Study by Osteosarcoma Cancer Cells.

Gold nanoparticles coated with proteins have shown extraordinary biocompatibility which advanced to several nanomedicine engineering applications. We synthesized protein-coated gold nanoparticles using green and chemical reduction routes for cellular uptake study. In the current work, we coated gold-aryl nanoparticles of the type AuNPs-CH-4-COOH with bovine serum albumin (BSA), collagen, zein, and lysozyme proteins.

Different Electrochemical Sensor Designs Based on Diazonium Salts and Gold Nanoparticles for Pico Molar Detection of Metals.

We report a comparison of sensors' performance of different hybrid nanomaterial architectures modifying an indium tin oxide (ITO) electrode surface. Diazonium salts and gold nanoparticles (AuNPs) were used as building units to design hybrid thin films of successive layers on the ITO electrode surface. Different architectures of hybrid thin films were prepared and characterized with different techniques, such as TEM, FEG-SEM, XPS, and EIS.

Can Plasmon Change Reaction Path? Decomposition of Unsymmetrical Iodonium Salts as an Organic Probe.

Plasmon-assisted transformations of organic compounds represent a novel opportunity for conversion of light to chemical energy at room temperature. However, the mechanistic insights of interaction between plasmon energy and organic molecules is still under debate. Herein, we proposed a comprehensive study of the plasmon-assisted reaction mechanism using unsymmetric iodonium salts (ISs) as an organic probe.

Polypyrrole-Wrapped Carbon Nanotube Composite Films Coated on Diazonium-Modified Flexible ITO Sheets for the Electroanalysis of Heavy Metal Ions.

Highly sensitive multicomponent materials designed for the recognition of hazardous compounds request control over interfacial chemistry. The latter is a key parameter in the construction of the sensing (macro) molecular architectures. In this work, multi-walled carbon nanotubes (CNTs) were deposited on diazonium-modified, flexible indium tin oxide (ITO) electrodes prior to the electropolymerization of pyrrole.

Development of Latent Fingerprints via Aryldiazonium Tetrachloroaurate Salts on Copper Surfaces: An XPS Study.

Surface studies of developed fingerprints have aided in the elimination of criminal cases before moving to the court. The combination of X-ray photoelectron spectroscopy (XPS) with the aryldiazonium gold(III), 4-ONCHNAuCl, surface modifier has been shown to be a novel approach in latent fingerprint detection and development for the quantification of film elements. The robust gold-aryl film was developed on the reducing chemicals excreted in the sebaceous fingerprints without the need for external stimuli and at a lesser extent after contacting the free metal surface.

Novel Enzyme-Free Multifunctional Bentonite/Polypyrrole/Silver Nanocomposite Sensor for Hydrogen Peroxide Detection over a Wide pH Range.

Precise designs of low-cost and efficient catalysts for the detection of hydrogen peroxide (HO) over wide ranges of pH are important in various environmental applications. Herein, a versatile and ecofriendly approach is presented for the rational design of ternary bentonite-silylpropyl-polypyrrole/silver nanoarchitectures (denoted as BP-PS-PPy/Ag) via the in-situ photo polymerization of pyrrole with salinized bentonite (BP-PS) in the presence of silver nitrate. The Pyrrolyl-functionalized silane (PS) is used as a coupling agent for tailoring the formation of highly exfoliated BP-PS-PPy sheet-like nanostructures ornamented with monodispersed Ag nanoparticles (NPs).

Bimetallic Cu-Rh Nanoparticles on Diazonium-Modified Carbon Powders for the Electrocatalytic Reduction of Nitrates.

4-Benzenethiol-functionalized high-surface-area graphite powder was prepared and decorated with bimetallic CuRh nanoparticles (NPs) to serve as electrocatalysts for the reduction of nitrates. In the first step, the HSAG powder was grafted with in-situ-generated diazonium compounds from 4-aminothiophenol (ATP) in an acidic medium using NaNO for the diazotization process. The surface composition was tuned using different initial quantities of ATP.

Preparation of Selective and Reproducible SERS Sensors of Hg Ions via a Sunlight-Induced Thiol⁻Yne Reaction on Gold Gratings.

In this contribution, we propose a novel functional surface-enhanced Raman spectroscopy (SERS) platform for the detection of one of the most hazardous heavy metal ions, Hg. The design of the proposed sensor is based on the combination of surface plasmon-polariton (SPP) supporting gold grating with the high homogeneity of the response and enhancement and mercaptosuccinic acid (MSA) based specific recognition layer. For the first time, diazonium grafted 4-ethynylphenyl groups have undergone the sunlight-induced thiol-yne reaction with MSA in the presence of Eosine Y.

A novel fluorescent sensor based on electrosynthesized benzene sulfonic acid-doped polypyrrole for determination of Pb(II) and Cu(II).

To develop conducting organic polymers (COPs) as luminescent sensors for determination of toxic heavy metals, a new benzene sulfonic acid-doped polypyrrole (PPy-BSA) thin film was electrochemically prepared by cyclic voltammetry (CV) on flexible indium tin oxide (ITO) electrode in aqueous solution. PPy-BSA film was characterized by FTIR spectrometry, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The optical properties of PPy-BSA were investigated by ultraviolet (UV)-visible absorption and fluorescence spectrometry in dimethylsulfoxide (DMSO) diluted solutions.

Highly Selective Copper Ion Imprinted Clay/Polymer Nanocomposites Prepared by Visible Light Initiated Radical Photopolymerization.

There is an urgent demand worldwide for the development of highly selective adsorbents and sensors of heavy metal ions and other organic pollutants. Within these environmental and public health frameworks, we are combining the salient features of clays and chelatant polymers to design selective metal ion adsorbents. Towards this end, the ion imprinting approach has been used to develop a novel nanohybrid material for the selective separation of Cu ions in an aqueous solution.

Surface Plasmon-Polariton: A Novel Way To Initiate Azide-Alkyne Cycloaddition.

Plasmon catalysis has recently generated tremendous interest in the field of modern chemistry. Application of plasmon introduces the principally new stimulus for the activation of organic reactions, keeping the optical energy concentrated in the vicinity of plasmonic structure, creating an optical near-field enhancement as well as hot electron injection. In this work, for the first time, we presented a new way for the initiation of the azide-alkyne cycloaddition (AAC) using the surface plasmon-polariton wave, supported by the gold grating.

Anti-corrosive and oil sensitive coatings based on epoxy/polyaniline/magnetite-clay composites through diazonium interfacial chemistry.

Epoxy polymer nanocomposites filled with magnetite (FeO) clay (B), named (B-DPA-PANI@FeO) have been prepared at different filler loading (0.1, 0.5, 1, 3, 5 wt.

Chitosan-Ag-TiO films: An effective photocatalyst under visible light.

Aiming the degradation of harmful molecules under visible light, new photocatalytic systems were created. For this purpose, the surface of chitosan thin films was modified in heterogeneous phase via a simple and straightforward mild chemical process: chemisorption of silver ions followed by the synthesis in situ of TiO at low temperature (100 °C). A high photocatalytic activity under visible light was observed, leading to the degradation and/or mineralization of different organic products such as o-toluidine, salicylic acid and 4-aminomethyl benzoic acid.